Month: June 2021

5961-59-1, name is 4-Methoxy-N-methylaniline, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Application In Synthesis of 4-Methoxy-N-methylaniline

An activated carbon supported platinum catalyst (Pt / C, 0.06 mg platinum, 0.0003 mmol, 0.1 mol%) was added to a 10 mL Schlenk tube,After evacuation of argon, add 1 mL of solvent (toluene).Under argon protection, to the above system,Separately, phenylsilane (78.9 mg, 0.75 mmol) was added successively,III-3 (R2 = p-methoxyphenyl, R3 = methyl) (41.2 mg, 0.3 mmol) and formic acid (27.6 mg, 0.6 mmol).The reaction was carried out at 80 C with stirring for 15 hours.After completion of the reaction, 3 mL of ethyl acetate was added to the system,The reaction was quenched with aqueous sodium hydroxide (3 mol / L, 3 mL)Ethyl acetate (3 x 10 mL), the organic phase was separated,Dried over anhydrous Na2SO4, filtered,The solvent was removed by rotary evaporation.The residue was purified by column chromatography on ethyl acetate / petroleum ether = 1: 100 mixed solvent,The product was isolated and purified to give the target product IV-333.6 mg in 74% yield.

The synthetic route of 5961-59-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Hubei Engineering College; Zhu Lei; Wang Liansheng; Li Bojie; Li Wei; Fu Boqiao; (21 pag.)CN106892826; (2017); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 707-07-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 707-07-3, name is (Trimethoxymethyl)benzene belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: 2-Nitroaniline derivative (1 mmol) was added to a mixture of indium powder (574 mg, 5.0 mmol for 2-nitroaniline, 918 mg 8.0 mmol for 1,2-dinitroarene), and acetic acid (0.572 mL, 10 mmol) in ethyl acetate (2 mL), followed by the addition of trimethyl orthoester (2.0 mmol) in ethyl acetate (3 mL for 2-nitroaniline; 8 mL for 1,2-dinitroarene). The reaction mixture was stirred at reflux under a nitrogen atmosphere. After the reaction was completed, the reaction mixture was diluted with ethyl acetate (30 mL), filtered through Celite, poured into 10% NaHCO3 (30 mL), and then extracted with ethyl acetate (30 mL×3). The combined organic extracts were dried over MgSO4, filtered, and concentrated. The residue was eluted with ethyl acetate/hexane (v/v=10/90) for 2-phenylbenzimidazole derivatives or methanol/dichloromethane (v/v=1/99) for 2-methylbenzimidazole derivatives through a silica gel column to give the corresponding benzimidazoles. The structures of the benzimidazoles were characterized by 1H NMR, 13C NMR, FTIR, and GC-MS, and were mostly known compounds. HRMS data were reported in addition for unknown compounds.

The synthetic route of (Trimethoxymethyl)benzene has been constantly updated, and we look forward to future research findings.

Reference:
Article; Kim, Jaeho; Kim, Jihye; Lee, Hyunseung; Lee, Byung Min; Kim, Byeong Hyo; Tetrahedron; vol. 67; 41; (2011); p. 8027 – 8033;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 2930-05-4,Some common heterocyclic compound, 2930-05-4, name is 2-((Benzyloxy)methyl)oxirane, molecular formula is C10H12O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In a typical procedure, an admixture comprising of a solid cata-lyst (20 mg), an aryloxy epoxide (1 mmol) and an amine (1 mmol)were taken in a 5 mL screw capped vial and stirred vigorously fora given time period (monitored by TLC) under solvent free con-dition. At the end of the reaction, products amino alcohols wereobtained as viscous liquids or solids. Therefore, the reaction mix-ture was repeatedly washed with methanol (3 mL) and centrifuged.Methanol from the combined organic layer was evaporated underreduced pressure to get crude amino alcohol. A small sample of thecrude product was subjected to HPLC to find out regioselectivity,while rest of the reaction mixture was subjected to flash columnchromatography (hexane/ethyl acetate, 90:10) to get the majorregioisomer in pure form. The purified product was characterizedby1H and13C NMR, FTIR, Microanalysis and characterization datafor all the ring opening products are given in supporting informa-tion. The residue obtained from centrifugation was dried in air (1 h)and then in oven at 100C for 3 h to get back the catalyst (>97%recovery) for further use.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-((Benzyloxy)methyl)oxirane, its application will become more common.

Reference:
Article; Shah, Arpan K.; Prathap, K. Jeya; Kumar, Manish; Abdi, Sayed H.R.; Kureshy, Rukhsana I.; Khan, Noor-ul H.; Bajaj, Hari C.; Applied Catalysis A: General; vol. 469; (2014); p. 442 – 450;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 24332-20-5, These common heterocyclic compound, 24332-20-5, name is 1,1,2-Trimethoxyethane, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 2 Concentrated hydrochloric acid (0.84 ml) was added to a stirred mixture of 2-methoxyacetaldehyde dimethyl acetal (12.6 g) and water (59 ml) and the resultant solution was heated to 40 C. for 2 hours. The solution was cooled to ambient temperature and basified to pH8 by the addition of a saturated aqueous sodium bicarbonate solution. The mixture so obtained was added to a stirred suspension of 6-amino-4-(3′,4′-difluoroanilino)quinazoline hydrochloride (6.4 g) in a mixture of glacial acetic acid (1.26 g) and ethanol (750 ml). Sodium cyanoborohydride (2.64 g) was added and the mixture was stirred at ambient temperature for 16 hours. The mixture was evaporated and the residue was partitioned between methylene chloride and water. The organic phase was dried (MgSO4) and evaporated. The residue was purified by column chromatography using increasingly polar mixtures of methylene chloride and methanol as eluent. There was thus obtained 4-(3′,4′-difluoroanilino)-6-(2-methoxyethylamino)quinazoline (5.2 g, 69%), m.p. 150-153 C.; NMR Spectrum: (CD3 SOCD3 +CD3 CO2 D) 3.33 (s, 3H), 3.43 (t, 2H), 3.63 (t, 2H), 7.5 (m, 5H), 7.96 (m, 1H), 8.56 (s, 1H); Elemental Analysis: Found C, 61.1; H, 4.9; N, 16.5; C17 H16 F2 N4 O 0.2H2 O requires C, 61.1; H, 4.95; N, 16.8%.

The synthetic route of 24332-20-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Zeneca Limited; US5942514; (1999); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 36865-41-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 36865-41-5, name is 1-Bromo-3-methoxypropane belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 5-bromo-2-methoxy-phenol (67.00 g, 330.00 mmol, 1.00 eq) and 1- bromo-3-methoxy-propane (100.99 g, 660.00 mmol, 2.00 eq) in DMF (300.00 mL) was added K2C03 (136.83 g, 990.00 mmol, 3.00 eq). The mixture was stirred at 25 C for 8 h. Desired product was observed on LC-MS. The reaction mixture was concentrated in vacuo and extracted with ethyl acetate (4OmL*3). The crude product was purified by flash column (Petroleum ether/Ethyl acetate=5/1) to give 4-bromo-1-methoxy-2-(3- methoxypropoxy)benzene (90.00 g, 327.11 mmol, 99.12 % yield) as a colorless oil. LC-MS:EW6 108-59-P 1Z (M+H=274.9, M+2+H=276.9)

The synthetic route of 1-Bromo-3-methoxypropane has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NEWAVE PHARMACEUTICAL INC.; CHEN, Yi; (81 pag.)WO2018/22282; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 112970-44-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 112970-44-2 name is 2-Bromo-3-methoxyaniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A dry round-bottom flask with a reflux condenser was charged with 2-bromo-3-methoxyanilin (1.00 g, 4.95 mmol), KHMDS(32 mg, 0.16 mmol, 0.03 eq), BrettPhos Pd G1 Methyl-t-Butyl Ether adduct (118 mg, 0.15 mmol, 0.03 eq) and Cs2CO3 (3.22 g,9.88 mmol, 2.0 eq). The system was sealed by a rubber septum before air was removed under reduced pressure and replaced by argon (repeated 3 times). Anhydrous toluene (20 mL) was transferred to the flask and the resulting orange colored suspension gradually warmed up to reflux and left stirring for 24 h. The heating was removed and the crude mixture was cooled to reach rt . Thereaction mixture was filtered through a funnel of Celite and undissolved material washed with DCM until no yellow solution came through the funnel. The resulting crude mixture was dry-loadedon silica and purified by flash column chromatography on silicagel (1:7 EtOAc/DCM as eluent) affording 468 mg (79%) of the yellow solid. Rf: 0.51 (100% EtOAc). 1H NMR (400 MHz, CDCl3) d7.99 (dd, J = 8.9, 1.1 Hz, 2H), 7.74 (dd, J = 8.9, 7.6 Hz, 2H), 7.09(dd, J = 7.6, 1.1 Hz, 2H), 4.17 (s, 6H). 13C NMR (101 MHz, CDCl3) d155.1, 143.2, 137.0, 130.3, 122.2, 107.0, 56.6. HRMS (EI): Exactmass calculated for C14H12N2O2: 240.0899, found 240.0894(1.8 ppm). 1H- and 13C NMR data are in accordance with published literature.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Bromo-3-methoxyaniline, and friends who are interested can also refer to it.

Reference:
Article; Viktorsson, Elvar Oern; Melling Gr°the, Bendik; Aesoy, Reidun; Sabir, Misbah; Snellingen, Simen; Prandina, Anthony; H°gmoen ?strand, Ove Alexander; Bonge-Hansen, Tore; D°skeland, Stein Ove; Herfindal, Lars; Rongved, Pal; Bioorganic and Medicinal Chemistry; vol. 25; 7; (2017); p. 2285 – 2293;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 6358-77-6, A common heterocyclic compound, 6358-77-6, name is 5-Bromo-2-methoxyaniline, molecular formula is C7H8BrNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Preparation of (±)-12: A pressure glass tube charged with trifluoroborate (±)-10 (31 mg, 0.10 mmol), Cs2CO3 (98 mg, 0.30 mmol) and PdCl2(dppf)·CH2Cl2 (4 mg, 5 mol %) was alternatively evacuated and sparged with argon three times. A solution of 4-bromoanisol (21 mg, 0.11 mol) in toluene (1.5 mL) previously flushed with argon, then water (0.5 mL) were added by syringes. The reaction mixture was stirred at 100 C for 18 h and then cooled to room temperature. Water (5 mL) was added and the mixture extracted with EtOAc (5 mL × 2). The combined organic layers were washed with water (5 mL × 2), dried (MgSO4) and concentrated in vacuo. The residue was purified by column chromatography (cyclohexane/EtOAc 9:1), affording 12 as a colorless oil (24 mg, 75%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Ty, Nancy; Pontikis, Renee; Chabot, Guy G.; Devillers, Emmanuelle; Quentin, Lionel; Bourg, Stephane; Florent, Jean-Claude; Bioorganic and Medicinal Chemistry; vol. 21; 5; (2013); p. 1357 – 1366;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 51388-20-6, name is 4-(Benzyloxy)aniline hydrochloride, A new synthetic method of this compound is introduced below., HPLC of Formula: C13H14ClNO

A solution of 4-benzyloxyaniline hydrochloride (4.0 g, 17.0 mmol), methanesulfonylacetic acid (2.35 g, 17.0 mmol) and HBTU (6.89 g, 18.2 mmol) in DMF (70 mL) was stirred at ambient temperature one minute. DIEA (6.5 mL, 37.2 mmol) was added all at once, and the resultant solution was stirred at ambient temperature. The solution was poured into water, and the product crystallized. The product, 5.4 g (99%), was collected by filtration and was used without any further purification in the subsequent reaction. MS m/z 320 (MH+). 1H NMR(DMSO-d6) delta 3.17 (s, 3H), 4.25 (s, 2H), 5.07 (s, 2H), 7.00 (d, 2H), 7.32-7.55 (m, 7H) and 10.32 (s, 1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Carson, John R.; McNally, James J.; US2005/182108; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2398-37-0, name is 1-Bromo-3-methoxybenzene, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 2398-37-0

Acetyl chloride (3.56 mL, 0.06 mol) is added dropwise to a stirred suspension of 3-bromoanisole (9.35 g, 0.05 mol) and AlCl3 (8.00 g, 0.06 mol) in dichloromethane (50 mL) at 0 C under argon. The resulting mixture is stirred at 0 0C for 40 min and then at room temperature for 1 h, and diluted with H2O (100 mL) and 2 N HCl (35 mL), and extracted with ethyl acetate (2 x 100 mL and 50 mL). The extract is washed (brine) and dried. After solvent removal at reduced pressure, the residue is purified on silica gel (12.5% to 14.3% ethyl acetate/hexane) to give 9.55 g (83%) of 2 as a colorless liquid. IR 2964, 1688, 1596, 1252 cm”1; 1H NMR (CDCI3) delta 2.66 (s, 3H, CH3CO), 3.88 (s, 3H, CH3O), 6.91 (dd, J= 8.4 Hz, 2.4 Hz, IH, 5-PhH), 7.19 (d, J= 2.4 Hz, IH, 3- PhH), 7.63 ppm (d, J= 8.4 Hz, IH, 6-PhH).

According to the analysis of related databases, 2398-37-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BURNHAM INSTITUTE FOR MEDICAL RESEARCH; MERCOLA, Mark; DAWSON, Marcia, I.; CASHMAN, John; WO2010/33643; (2010); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 41864-45-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 41864-45-3, name is 4,5-Dimethoxy-2-methylaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

The compound 66 (830 mg, 2.75 mmol) was dissolved in acetic acid (6.64 mL). 4,5-dimethoxy-2-methylaniline (2.30 g, 13.7 mmol) was added to the solution. The mixture was stirred at 100C for 3 hours. Water was added to the reaction mixture. The mixture was extracted with ethyl acetate. The organic layer was washed by brine, and dried over sodium sulfate. The solvent was evaporated under reduced pressure. The obtained residue was solidified with ethyl acetate to give the compound I-1281 (450 mg, yield 40%). 1H-NMR (DMSO-D6) delta: 1.90 (s, 3H), 3.70 (s, 3H), 3.75 (s, 3H), 5.33 (s, 2H), 6.75 (s, 1H), 6.83 (s, 1H), 7.33 (dd, J = 8.0 Hz, 2H), 7.40 (s, 1H), 8.83 (s, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4,5-Dimethoxy-2-methylaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Shionogi & Co., Ltd; TANAKA, Satoru; OGAWA, Tomoyuki; KAI, Hiroyuki; OGATA, Yuki; HIRAI, Keiichiro; KUROSE, Noriyuki; FUJII, Yasuhiko; (438 pag.)EP3287443; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem