Month: September 2021

588-63-6, name is (3-Bromopropoxy)benzene, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Product Details of 588-63-6

The 148mgNa dissolved in 20ml of absolute ethanol until complete dissolution, 6-(3,5-difluoro)benzyl-2-thiouracil 234mg (0.92mmol) and 1- (3-bromo-propoxy) benzene 297mg (1.38mmol) was added thereto, TLC the reaction was complete after stirring overnight at room temperature; column chromatography, P:E = 5:1,2:1,1:1, the final product was 222mg, as a white solid, a yield of 62.14percent

The synthetic route of 588-63-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Peking University; Zhang, Liang; FU, YUHONG; Qin, Hua; Wang, Xiao Wei; Liu, Jun Yi; (30 pag.)CN103864699; (2016); B;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 202865-80-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 202865-80-3, name is 4-Bromo-2-fluoro-1-isopropoxybenzene belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a mixture of 5-amino-3-t-butyl-1-(4-chlorobenzyl)pyrazole (50.0 mg, 0.190 mmol) and dioxane (1 mL) were added 4-bromo-2-fluoro-1-isopropoxybenzene (49 mg, 0.21 mmol), tris(dibenzylideneacetone)(0) (2.2 mg, 0.0024 mmol), 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene (3.3 mg, 0.0057 mmol) and sodium phenoxide trihydrate (48 mg, 0.28 mmol), and the resulting mixture was stirred at 170C for 30 minutes under microwave irradiation. To the reaction mixture was added saturated aqueous sodium bicarbonate, and the mixture was extracted with ethyl acetate. The extract was washed by brine, dried over anhydrous sodium sulphate, and concentrated in vacuo. The resulting residue was purified by silica gel column chromatography (ethyl acetate/hexane) and reversed-phase HPLC (0.3%fomic acid/acetonitrile) to give 3-t-butyl-1-(4-chlorobenzyl)-5-(3-fluoro-4-isopropoxyphenylamino)pyrazole (33 mg, Yield: 42%) as pale yellow solid. 1H-NMR (delta ppm TMS/DMSO-d6): 1.20-1.24 (15H, m), 4.30-4.37 (1H, m), 5.18 (2H, s), 5.92 (1H, s), 6.53-6.65 (2H, m), 6.96 (1H, t, J = 9.0 Hz), 7.06 (2H, d, J = 8.1 Hz), 7.34 (2H, d, J = 8.1 Hz), 7.91 (1H, s).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Bromo-2-fluoro-1-isopropoxybenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Shionogi & Co., Ltd.; KAI, Hiroyuki; ENDOH, Takeshi; JIKIHARA, Sae; ASAHI, Kentaro; HORIGUCHI, Tohru; EP2604260; (2013); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

588-96-5, name is p-Bromophenetole, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of p-Bromophenetole

Example XIV.1 2-{4-[1-(4-Ethoxy-phenyl)-piperidin-4-yl]-phenyl}-propionic acid 1.00 g (4.04 mmol) 2-(4-Piperidin-4-yl-phenyl)-propionic acid methyl ester (XI.3) are added to a mixture of 813 mg (4.04 mmol) 1-bromo-4-ethoxy-benzene, 1.60 g (97%, 16.2 mmol) sodium tert-butyrat, 483 mg (1.62 mmol) 2-(di-tert-butylphosphino)biphenyl and 370 mg (0.40 mmol) tris-(dibenzylidenaceton)-dipalladium(0) in 10 mL 1,4-dioxane. The mixture is stirred for 12 h at 70 C. After that time, the precipitate is filtered off and washed with ACN and diethyl ether. The residue is purified by HPLC (column: Waters XBridge 50; eluent A: water+0.3% NH4OH, eluent B: MeOH) to yield the desired product. C22H27NO3 (M=353.5 g/mol) ESI-MS: 354 [M+H]+Rt (HPLC): 1.69 min (method C)

The synthetic route of 588-96-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ROTH, Gerald Juergen; FLECK, Martin; LEHMANN-LINTZ, Thorsten; NOSSE, Bernd; US2013/143876; (2013); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

5905-69-1, These common heterocyclic compound, 5905-69-1, name is 1-Bromo-4-(difluoromethoxy)benzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(Reference Example 71) Ethyl 1-[4-(difluoromethoxy)phenyl]piperidine-4-carboxylate[0521] Sodium tert-butoxide (2.29 g, 23.8 mmol), palladium(II) acetate (428 mg, 1.91 mmol), and tri-tert-butylphosphine (370 muL, 1.52 mmol) were added to a solution of ethyl piperidine-4-carboxylate (3.52 mL, 22.9 mmol) and 1-bromo-4-(difluoromethoxy)benzene (4.25 g, 19.1 mmol) in toluene (122 mL), and the mixture was stirred at 80C for 30 minutes. Water was added to the reaction solution, followed by extraction with ethyl acetate. The obtained organic layer was washed with brine and then dried over anhydrous sodium sulfate, and the solvent was distilled off under reduced pressure. The obtained residue was purified by silica gel column chromatography [elute: hexane/ethyl acetate = 100/0 – 90/10] to obtain the title compound (3.17 g, yield: 56%). [0523] 1H-NMR (400 MHz, CDCl3) delta: 7.07-7.00 (2H, m), 6.95-6.87 (2H, m), 6.41 (1H, t, J = 75 Hz), 4.16 (2H, q, J = 7 Hz), 3.61-3.55 (2H, m), 2.84-2.73 (2H, m), 2.47-2.39 (1H, m), 2.08-1.99 (2H, m), 1.95-1.83 (2H, m), 1.27 (3H, t, J = 7 Hz).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 5905-69-1.

Reference:
Patent; Daiichi Sankyo Company, Limited; KOBAYASHI, Hideki; OHKAWA, Nobuyuki; TAKANO, Daisuke; KUBOTA, Hideki; ONODA, Toshio; KANEKO, Toshio; ARAI, Masami; TERASAKA, Naoki; EP2862861; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

These common heterocyclic compound, 1535-73-5, name is 3-Trifluoromethoxyaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C7H6F3NO

Preparation of A/-(3-(5-(3-(trifluoromethoxy)phenylamino)pyridin-3- vDphenvDacetamide (Compound 152) [00296] A mixture of 3,5 -dibromopyridine (2.0Og, 8.44mmol), 3-acetamidophenylboronic acid (1.5 Ig, 8.44mmol), potassium carbonate (1.17g, 8.44mmol) and palladium (tetrakis)triphenylphosphine (294mg, 0.025mmol) in DME/H20 (4OmL, 3:1) was refluxed for 16h. The solvent was removed in vacuo, the resulting yellow solid was partitioned between DCM (30OmL) and brine (15OmL) and the two layers were separated. The aqueous layer was extracted further with DCM (2x10OmL) and the combined extracts were dried over anhydrous MgSO4. Evaporation of the solvent afforded crude iV-(3-(5-bromopyridin-3- yl)phenyl)acetamide in 74percent purity (LC). This material (1.2Og, 4.12mmol), 3- (trifluoromethoxy)aniline (66IuL, 4.95mmol), cesium carbonate (3.36g, 10.3mmol), palladium bis-acetate (47mg, 0.21mmol) and Xantphos (238mg, 0.41mmol) were dissolved in dioxane (7.5mL) and the resulting mixture was heated, under microwave activation, at 15O0C for 20mins. The crude mixture was partitioned between EtOAc (10OmL) and brine (10OmL) and the two layers were separated. The aqueous layer was extracted further with EtOAc (10OmL), the combined layers were dried over anhydrous MgSO4 and evaporated to dryness. The resulting solid was purified by column chromatography eluting using a gradient (EtOAc/hexanes 0:1 v/v to EtOAc/hexanes 1 :0 v/v) to afford 590mg (37percent) of the title compound. LCMS RT= 1.59min, MH+ 388.2. 1U NMR (d6-DMSO): 10.07 (IH, s), 8.83 (IH, s), 8.39 (IH, d, J2.5), 8.36 (IH, d, J 1.9), 7.91 (IH, s), 7.65 (IH, t, J2.2), 7.60 (IH, d, J 8.0), 7.45-7.33 (3H, m), 7.17 (IH, dd, J 8.2 1.8), 7.02 (IH, s), 6.84 (IH, d, J 8.2), 2.07 (3H, s).

The synthetic route of 3-Trifluoromethoxyaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BioMarin IGA, Ltd.; WREN, Stephen Paul; WYNNE, Graham Michael; LECCI, Cristina; WILSON, Francis Xavier; DAVIS, Paul James; WO2010/57833; (2010); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

These common heterocyclic compound, 82830-49-7, name is 2-Fluoro-1,4-dimethoxybenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 2-Fluoro-1,4-dimethoxybenzene

To a solution of 2-fluoro-l,4-dimethoxybenzene (8.1 g, 52.0 mmol) in anhydrous THF at -78 C, n-BuLi (2.5 M in hexane, 22 mL, 55 mmol) was added dropwise. The resulting mixture was stirred at -78 C for 1 h, and then ethyl chloroformate (5 mL, 52.1 mmol) was added dropwise. The reaction mixture was stirred at -78 C for additional 2 h and quenched with water (200 mL). The mixture was extracted with ethyl acetate (2×180 mL). The combined organic layers were washed with brine (200 mL), dried (Na2S04), and concentrated in vacuo. The residue was purified by silica gel column chromatography (1 :5 EtOAc/petroleum ether) to give ethyl 2-fluoro-3,6-dimethoxybenzoate (8.1 g).

The synthetic route of 2-Fluoro-1,4-dimethoxybenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARAGON PHARMACEUTICALS, INC.; KAHRAMAN, Mehmet; GOVEK, Steven, P.; NAGASAWA, Johnny, Y.; SMITH, Nicholas, D.; WO2011/156518; (2011); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6298-96-0, name is 1-(4-Methoxyphenyl)ethylamine, A new synthetic method of this compound is introduced below., COA of Formula: C9H13NO

B) (4S)-Lambda/-((1 S)-1-r4-(methyloxy)phenyllethyll-3.4-dihvdro-2H-pyranor3.2-lpyridin-4- amine: To a solution of crude 2,3-dihydro-4/-/-pyrano[3,2-]pyridin-4-one (2.43 g) in 1 ,2- dichloroethane was added {(1S)-1-[4-(methyloxy)phenyl]ethyl}amine EPO (2.49 g, 16.5 mmol) and acetic acid (1.4 ml_, 24.5 mmol). The reaction mixture was stirred for 1 hour, then sodium triacetoxyborohydride (5.18 g, 24.4 mmol) was added. The reaction mixture was stirred at room temperature for 16 hours, then diluted with dichloromethane and quenched with saturated aqueous sodium bicarbonate solution. The organic layer was separated and dried over sodium sulfate. Filtration and concentration, followed by flash chromatography (0 to 10% aqueous NH4OH in acetonitrile) provided (4S)- Lambda/-{(1S)-1-[4-(methyloxy)phenyl]ethyl}-3,4-dihydro-2/-/-pyrano[3,2-/j]pyridin-4-amine (1.90 g, 38% two step yield) as a brown oil. 1H NMR (400 MHz, CDCI3) delta 8.15 (dd, J = 3.0, 3.0 Hz, 1 H), 7.35 (d, J = 8.6 Hz, 2 H), 7.07 (d, J = 2.8 Hz, 2 H), 6.86 (d, J = 8.7 Hz, 2 H), 4.19 (ddd, J = 11.0, 7.7, 3.3 Hz, 1 H), 4.07 (q, J = 6.5 Hz, 1 H), 4.00 (ddd, J = 11.1 , 7.3, 3.5 Hz, 1 H), 3.91 (t, J = 5.7 Hz, 1 H), 3.80 (s, 3 H), 2.32 (br, 1 H), 1.70 (m, 2 H), 1.44 (d, J = 6.6 Hz, 3 H).

The synthetic route of 6298-96-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2006/76131; (2006); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

150-78-7, name is 1,4-Dimethoxybenzene, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Application In Synthesis of 1,4-Dimethoxybenzene

Paraformaldehyde (Aldrich, 4.27 g, 144.75 mmol) and HBr/AcOH (Fluka, 33%, 30 mL) were added slowly to a stuffed solution of 1,4-dimethoxybenzene (Aldrich, 10.00 g, 72.37 mmol) in glacial acetic acid (Fisher, 50 mL). The mixture was stirred at 50C for one hour, allowed to cool to room temperature, and then hydrolyzed in water (200 mL). The white solid was collected by filtration, suspended in CHC13 (50 mL), and refluxed for 10 mm. After cooling to room temperature, the white solid was again collected by filtration and washed with water (15.75 g, 67%). NMR spectra were obtained experimentally to confirm the chemical structure of the resulting compound and its purity. NMR results were as follows: ?H NMR (300 MHz, CDC13) 6:6.88 (s, 2H), 4.54 (s, 4H), 3.87 (s, 6H) ppm.

The synthetic route of 150-78-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ROBERT BOSCH GMBH; MARUNIAK, Autumn; AHMAD, Habib; RAGHUNATHAN, Ashwin; JOHNSON, Christopher; KAVUSI, Sam; FOMINA, Nadezda; LANG, Christoph; (170 pag.)WO2017/5587; (2017); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 1663-61-2,Some common heterocyclic compound, 1663-61-2, name is (Triethoxymethyl)benzene, molecular formula is C13H20O3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The product of Example 33D (62 mg, 0.2 mmol) was treated with triethyl orthobenzoate (Aldrich, 0.5 mL) in DMF (1 mL) at 100° C. for 10 h. It was then concentrated. The title product was purified by preparative HPLC (Xterra.(TM)., column, Xterra RP-18, 5 mum, 30.x.100 mm. Eluting Solvent, MeCN/H2O (NH4HCO3, 0.1 M, pH=10), (v. 90/10 to 10/90 over 20 min.) Flow rate, 75 mL/min., uv, 250 nm) as solid (40.0 mg, 50percent). 1H NMR (500 MHz, CD3OD) delta 1.52-1.64 (m, 1 H), 1.68-1.80 (m, 1 H), 1.80-1.92 (m, 1 H), 2.06-2.18 (m, 1 H), 2.25-2.31 (m, 1 H), 2.75-3.10 (m, 5 H), 3.39-3.49 (m, 1 H), 5.14-5.27 (m, 1 H), 7.55-7.66 (m, 3 H), 7.69 (dd, J=8.5, 1.8 Hz, 1 H), 7.81 (d, J=8.2 Hz, 1 H), 8.00 (d, J=1.5 Hz, 1 H), 8.27 (dd, J=8.1, 1.7 Hz, 2 H), 8.89 (s, 2 H) ppm; MS (DCl/NH3): 399 (M+H)+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route (Triethoxymethyl)benzene, its application will become more common.

Reference:
Patent; Abbott Laboratories; US2005/137204; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 349-65-5,Some common heterocyclic compound, 349-65-5, name is 2-Methoxy-5-(trifluoromethyl)aniline, molecular formula is C8H8F3NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

5-(Trifluoromethyl)-2-methoxyaniline was treated with CDI, followed by 4-(1-oxoisoindolin-5-yloxy)aniline according to Method C2d to afford the urea. Entry 26: 4-Hydroxyacetophenone was reacted with 4-fluoronitrobenzene according to Method A13, Step 1 to give 4-(4-acetylphenoxy)nitrobenzene.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Methoxy-5-(trifluoromethyl)aniline, its application will become more common.

Reference:
Patent; BAYER CORPORATION; US2003/144278; (2003); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem