Author: Jessica.F

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6781-17-5, name is 2-(2-Ethoxyphenoxy)ethanamine, A new synthetic method of this compound is introduced below., Recommanded Product: 2-(2-Ethoxyphenoxy)ethanamine

a) 2-Methoxy-5-(2-oxopropyl)-benzene sulfonamide (37.3 gm, 153.3 mmol), 2-(2-ethoxyphenoxy)-1-ethanamine (29.8 gm, 164.4 mmol) and methanol (250 mL) were taken into a one liter stainless steel flask and mixed well. Catalyst Raney nickel (8 gm) was added to the flask and the mixture hydrogenated at 50 C. at hydrogen pressure of 40 psi for 30 hrs. The catalyst was removed by filtration and solvent from the filtrate was distilled off completely at 50 C. under vacuum. The dark brown crude obtained was treated with methanolic hydrochloric acid (175 mL) at 0-5 C. under stirring. Tamsulosin hydrochloride formed as a solid was filtered, washed with ethyl acetate (200 mL), suspended in methanol (120 mL) and the methanol slurry filtered to obtain off white solid material. It was dried for 3 hrs at 80 C. to give racemic tamsulosin hydrochloride. Melting point 255-257 C., chemical purity of 98.8 area % (by HPLC) and R,S ratio of 51.45:48.55 (by chiral HPLC).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; DIVI’S LABORATORIES LIMITED; US2006/79714; (2006); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 321-28-8, A common heterocyclic compound, 321-28-8, name is 1-Fluoro-2-methoxybenzene, molecular formula is C7H7FO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(A) 3-fluoro-4-methoxybenzaldehyde. To a solution of o-fluoroanisole, 101 g. (0.80 mole) in 500 ml. dry methylene chloride is added dropwise over 30 minutes a solution of titanium tetrachloride, 182 g. (0.96 mole, 1.2 equiv.) and alpha,alpha-dichloromethylmethyl ether, 110 g. (0.96 mole) in an equal volume of methylene chloride. The temperature is maintained at 10-20 C. with an ice-bath. The mixture is stirred at room temperature for 1 hour longer and then poured over crushed ice-water with stirring. Ether (1 l.) is added,and the mixture stirred under nitrogen until solution occurs. The organic layer is extracted with water (3X), sodium bicarbonate solution (3X) and dried (MgSO4). The solvent is evaporated off at 30 to give crude product as an oil. The oil is vacuum distilled through a jacketed Vigreux column when it gives 3-fluoro-4-methoxybenzaldehyde, B.P. 120-121 C, at 10 mm. Hg; Rf0.6 on a silica-gel G plate with methylene chloride.

The synthetic route of 321-28-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; FGN, INC.; THE UNIVERSITY OF ARIZONA; EP485172; (1992); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 113421-98-0, name is 4-Fluoro-3-(trifluoromethoxy)aniline, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 113421-98-0, name: 4-Fluoro-3-(trifluoromethoxy)aniline

General procedure: Ethyl 4-bromo-1H-indole-2-carboxylate (1 eq), Pd2(dba)3 (0.1 eq), X-phos(0.2 eq), Cs2CO3 (3 eq) and aryl amine (3 eq) was added to a microwave tube,dissolved in 1,4-dioxane, and filled with argon gas. The microwave reaction wascarried out at 100 C for 0.5-1.5 h, and the starting material disappeared. The mixturewas cooled to room temperature and concentrated. Ethyl acetate was added todissolve the residue, and the mixture was washed with saturated brine and water, driedover anhydrous Na2SO4, and concentrated in vacuo. The crude product was purifiedby column chromatography to afford the target compound. Compounds 8m-8o, 8s,8a-3 ~ 8a-5, 8a-13, 8a-15 ~ 8a-17, 8o-1 ~ 8o-24 were prepared with method 3.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Cui, Guonan; Lai, Fangfang; Wang, Xiaoyu; Chen, Xiaoguang; Xu, Bailing; European Journal of Medicinal Chemistry; vol. 188; (2020);,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 332-48-9,Some common heterocyclic compound, 332-48-9, name is 1-(2-Bromoethoxy)-4-fluorobenzene, molecular formula is C8H8BrFO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 90 4-[2-(4-fluorophenoxy)ethoxy]-1-{2-[isopropyl(methyl)amino]-1H-benzimidazol-6-yl}pyridin-2(1H)-one Potassium carbonate (60 mg) and 1-(2-bromoethoxy)-4-fluorobenzene (60 mg) were added to a DMF solution (5 mL) of the compound (60 mg) obtained in Production Example 41-2, and stirred overnight at room temperature. Ethyl acetate was added to the reaction liquid, washed successively with water and saturated saline water, and dried with anhydrous magnesium sulfate. The solvent was evaporated off under reduced pressure, and the obtained residue was purified by silica gel column chromatography (NH silica gel, chloroform) to obtain the entitled compound (14.6 mg). 1H-NMR (400 MHz, DMSO-d6, delta ppm): 1.17 (6H, d, J=6.7 Hz), 2.90 (3H, s), 4.29-4.35 (4H, m), 4.49 (1H, septet, J=6.7 Hz), 5.92 (1H, d, J=2.7 Hz), 6.03 (1H, dd, J=7.6 Hz, 2.7 Hz), 6.79 (1H, brs), 6.99-7.05 (3H, m), 7.11-7.19 (3H, m), 7.52 (1H, d, J=7.4 Hz), 11.32 (1H, brs). ESI-MS Found: m/z 437 [M+H]+

The synthetic route of 332-48-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Sakuraba, Shunji; Kameda, Minoru; Kishino, Hiroyuki; Haga, Yuji; Otake, Norikazu; Moriya, Minoru; US2009/264426; (2009); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

These common heterocyclic compound, 1462-37-9, name is ((2-Bromoethoxy)methyl)benzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of ((2-Bromoethoxy)methyl)benzene

506 mg (60percent in oil, 13 mmol equivalents) of sodium hydride was added to 5.0 mL of tetrahydrofuran, and the mixture was cooled to about 0°C in an ice bath. 3.2 mL (20.7 mmol equivalents) of diethyl malonate was added thereto (solution A). 2.3 g (10.7 mmol equivalents) of 2-benzyloxy-1-bromoethane was dissolved in 3.0 mL of tetrahydrofuran, this was added dropwise to solution A over 10 minutes, and the mixture was refluxed while heating overnight. After completion of the reaction, a 0.5 mol/L aqueous solution of hydrochloric acid was added dropwise to the reaction liquid, and the mixture was extracted three times with diethyl ether. The combined diethyl ether layers were washed with brine, then dried with anhydrous magnesium sulfate, and subsequently concentrated under vacuum, and the obtained crude product was purified by silica gel column chromatography (eluent: hexane/ethyl acetate (v/v) = 20/1) to give 2.85 g (9.67 mmol equivalents) of diethyl 2-(2-benzyloxyethyl)malonate. [0115] 1H-NMR (solvent: deuterated chloroform) of diethyl 2-(2-benzyloxyethyl)malonate: delta 7.36-7.28 (m, 5H), 4.48 (s, 2H), 4.21-4.14 (m, 4H), 3.60 (d, J = 7.3 Hz, 1H), 3.53 (t, J = 5.5 Hz, 2H), 2.22 (dt, J = 5.5, 7.3 Hz, 2H), 1.25 (t, J = 7.3 Hz, 6H)

The synthetic route of ((2-Bromoethoxy)methyl)benzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Nihon Medi-Physics Co., Ltd.; National University Corporation Hokkaido University; NAKATA, Norihito; OKUMURA, Yuki; KIRIU, Masato; NAGATA, Eriko; MATSUMOTO, Hiroki; KUGE, Yuji; ZHAO, Songji; NISHIJIMA, Ken-Ichi; EP2759538; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 446-61-7, A common heterocyclic compound, 446-61-7, name is 2-Fluoro-6-methoxyaniline, molecular formula is C7H8FNO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(1) 2-Fluoro-6-methoxyaniline (7.80 g) and 17.23 g of di-(2-bromoethyl)amine hydrobromide were dissolved in 5 ml of water and, by heating at about 110 C. on a bath, 10 ml of 30% potassium hydroxide solution was added thereto (each about 3.5 ml once an hour). Heating was further continued (7 hours in total). After cooled, the reaction solution was made alkaline with aqueous solution of sodium hydroxide to salt out and extracted with chloroform twice. The extract was washed with saturated sodium chloride solution, dried over sodium sulfate, the solvent was evaporated therefrom, and the residue was purified by a column chromatography to give 8.95 g of oily 1-(2-fluoro-6-methoxyphenyl)piperazine in 34.94 g yield or 94%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Nippon Shinyaku Co., Ltd.; US4843070; (1989); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 36805-97-7, A common heterocyclic compound, 36805-97-7, name is 1,1-Di-tert-butoxy-N,N-dimethylmethanamine, molecular formula is C11H25NO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1: A suspension of 6-chloro-4-(isopropylamino)nicotinic acid (240 g, 1118 mmol) in toluene (1800 mL) in a 1 L round bottom flask was heated to 90 C. N,N-dimethylformamide di-tert-butyl acetal (1609 mL, 6709 mmol) in toluene (1800 mL) was added slowly over 8-9 hrs. The reaction mixture was heated at 90 C. for 12 hrs. After completion of 12 hrs, the reaction mixture was cooled and concentrated under reduced pressure to remove excess of solvent and obtain the crude material. The crude material was purified by flash column chromatography using silica gel as stationary phase and EtOAc: pet ether (2:8) as eluent to afford the title compound, tert-butyl 6-chloro-4-(isopropylamino)nicotinate (275 g, 91% yield). LC/MS 271.0 (M+H). 1H NMR (400 MHz, CDCl3) delta=8.59 (s, 1H), 8.14-8.08 (m, 1H), 6.51 (s, 1H), 3.71-3.61 (m, 1H), 1.57 (s, 9H), 1.28 (d, J=6.5 Hz, 6H).

The synthetic route of 36805-97-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Santella, Joseph B.; Kumar, Sreekantha Ratna; Duncia, John V.; Gardner, Daniel S.; Paidi, Venkatram Reddy; Nair, Satheesh Kesavan; Hynes, John; Wu, Hong; Murugesan, Natesan; Sarkunam, Kandhasamy; Arunachalam, Piramanayagam; US2015/191464; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 2674-34-2, name is 1,4-Dibromo-2,5-dimethoxybenzene, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 2674-34-2, SDS of cas: 2674-34-2

General procedure: To an N-heterocycle was added a solution of i-PrMgCl*LiCl (1.33 M, 1.8 eq. with respect to N-heterocycle, in THF) and (i-Pr)2NH (0.1 with respect to N-heterocycle). The mixture was stirred at room temperature under an argon atmosphere for 18 hours. An electrophile was added and the mixture was stirred at room temperature for 20 minutes. The reaction was quenched by addition of saturated aqueous NH4Cl (20 mL), and a saturated Na2S2O3 solution (20 mL) in the case of I2 as an electrophile. The mixture was extracted three times with EtOAc, the organic layer was dried over MgSO4, filtered and the solvent was removed under reduced pressure.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Nxumalo; Dinsmore; Synthetic Communications; vol. 45; 21; (2015); p. 2478 – 2484;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 20781-20-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 20781-20-8, name is (2,4-Dimethoxyphenyl)methanamine belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 2,4-dimethoxybenzylamine (6.6 mL, 43.5 mmol) in DCM (85 mL) was added saturated aqueous sodium bicarbonate solution (85 mL) and the mixture was stirred vigorously at RT for 15 min. Stirring was stopped then thiophosgene (6.6 mL, 87 mmol) was added via syringe to the bottom layer. The mixture was stirred at RT for 90 min then the aqueous layer was separated and the organic layer was washed with brine, dried over Na2SC>4 and concentrated in vacuo twice from DCM to give 9.1 g of l-(isothiocyanatomethyl)-2,4-dimethoxybenzene as yellow oil.

The synthetic route of (2,4-Dimethoxyphenyl)methanamine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; MCKITTRICK, Brian; CALDWELL, John, P.; MCCAULEY, John, A.; VACCARO, Henry; CHAN, Tin-Yau; KIM, Hyunjin; SMITH, Elizabeth; HONG, Liwu; KHAN, Tanweer; YING, Shihong; WANG, Hongwu; (66 pag.)WO2018/118827; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 929-75-9, A common heterocyclic compound, 929-75-9, name is 1,11-Diamino-3,6,9-trioxaundecane, molecular formula is C8H20N2O3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: All macrocyclic compounds were obtained as previously described. 20,21 The corresponding diester (1-3) (10 mmol) and diamine (4-8) (10 mmol) were dissolved in MeOH (100 ml). The reaction mixture was stirred for 7 d at rt. After completion of the reaction (monitored by TLC), the solvent was evaporated and the residue was puriofied by chromatography on a silica gel column using 0-5% solutions of MeOH/CH2Cl2. Analytical and spectroscopic data are collected in the Supplementary Materials.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Pikus, Grzegorz; Pa?niczek, Ewa; Jurczak, Janusz; Arkivoc; vol. 2017; 2; (2017); p. 534 – 545;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem