Category: 103-50-4

An article Liquid-Phase Exfoliation of Rhenium Disulfide by Solubility Parameter Matching WOS:000608859100003 published article about TRANSITION-METAL DICHALCOGENIDES; CHEMICAL-VAPOR-DEPOSITION; FEW-LAYER RES2; FIELD-EFFECT TRANSISTORS; LARGE-SCALE PRODUCTION; COLLOIDAL SYNTHESIS; INPLANE ANISOTROPY; NANOSHEETS; MOS2; MECHANISM in [Schiettecatte, Pieter; Geiregat, Pieter; Hens, Zeger] Univ Ghent, Phys & Chem Nanostruct, Dept Chem, B-9000 Ghent, Belgium; [Schiettecatte, Pieter; Geiregat, Pieter; Hens, Zeger] Univ Ghent, Ctr Nano & Biophoton, B-9000 Ghent, Belgium; [Rousaki, Anastasia; Vandenabeele, Peter] Univ Ghent, Dept Chem, Raman Spect Res Grp, B-9000 Ghent, Belgium; [Vandenabeele, Peter] Univ Ghent, Archaeometry Res Grp, Dept Archaeol, B-9000 Ghent, Belgium in 2020, Cited 74. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4. Recommanded Product: 103-50-4

In this work, we provide a detailed account of the liquid-phase exfoliation (LPE) of rhenium disulfide (ReS2), a promising new-generation two-dimensional material. By screening LPE in a wide range of solvents, we show that the most optimal solvents are characterized by similar Hildebrand or dispersive Hansen solubility parameters of 25 and 18 MPa1/2, respectively. Such values are attained by solvents such as N-methyl-2-pyrrolidone, N,N-dimethylformamide, and 1-butanol. In line with solution thermodynamics, we interpret the conditions for high-yield exfoliation as a matching of the solvent and ReS2 solubility parameters. Using N-methyl-2-pyrrolidone as an exemplary exfoliation solvent, we undertook a detailed analysis of the exfoliated ReS2. In-depth morphological, structural, and elemental characterization outlined that the LPE procedure presented here produces few-layer, anisotropically stacked, and chemically pure ReS2 platelets with long-term stability against oxidation. These results underscore the suitability of LPE to batch-produce few-layer and pristine ReS2 in solvents that have a solubility parameter close to 25 MPa1/2.

Recommanded Product: 103-50-4. About Benzyl ether, If you have any questions, you can contact Schiettecatte, P; Rousaki, A; Vandenabeele, P; Geiregat, P; Hens, Z or concate me.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

I found the field of Science & Technology – Other Topics; Materials Science; Physics very interesting. Saw the article Adjusting the Neel relaxation time of Fe3O4/ZnxCo1-xFe2O4 core/shell nanoparticles for optimal heat generation in magnetic hyperthermia published in 2021. SDS of cas: 103-50-4, Reprint Addresses De Biasi, E; Winkler, EL (corresponding author), Consejo Nacl Invest Cient & Tecn, Ctr Atom Bariloche, Inst Nanociencia & Nanotecnol CNEA, RA-8400 San Carlos De Bariloche, Argentina.; De Biasi, E; Winkler, EL (corresponding author), Univ Nacl Cuyo, Inst Balseiro, Mendoza, Argentina.. The CAS is 103-50-4. Through research, I have a further understanding and discovery of Benzyl ether

In this work it is shown a precise way to optimize the heat generation in high viscosity magnetic colloids, by adjusting the Neel relaxation time in core/shell bimagnetic nanoparticles, for magnetic fluid hyperthermia (MFH) applications. To pursue this goal, Fe3O4/ZnxCo1-xFe2O4 core/shell nanoparticles were synthesized with 8.5 nm mean core diameter, encapsulated in a shell of similar to 1.1 nm of thickness, where the Zn atomic ratio (Zn/(Zn + Co) at%) changes from 33 to 68 at%. The magnetic measurements are consistent with a rigid interface coupling between the core and shell phases, where the effective magnetic anisotropy systematically decreases when the Zn concentration increases, without a significant change of the saturation magnetization. Experiments of MFH of 0.1 wt% of these particles dispersed in water, in Dulbecco modified Eagles minimal essential medium, and a high viscosity butter oil, result in a large specific loss power (SLP), up to 150 W g(-1), when the experiments are performed at 571 kHz and 200 Oe. The SLP was optimized adjusting the shell composition, showing a maximum for intermediate Zn concentration. This study shows a way to maximize the heat generation in viscous media like cytosol, for those biomedical applications that require smaller particle sizes.

Welcome to talk about 103-50-4, If you have any questions, you can contact Fabris, F; Lohr, J; Lima, E; de Almeida, AA; Troiani, HE; Rodriguez, LM; Mansilla, MV; Aguirre, MH; Goya, GF; Rinaldi, D; Ghirri, A; Peddis, D; Fiorani, D; Zysler, RD; De Biasi, E; Winkler, EL or send Email.. SDS of cas: 103-50-4

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Recently I am researching about BARIUM FERRITE NANOPARTICLES; IRON-OXIDE NANOPARTICLES; FEPT NANOPARTICLES; NONAQUEOUS SYNTHESIS; COBALT NANOCRYSTALS; EXCHANGE BIAS; COERCIVITY; PHASE; COPT, Saw an article supported by the . Published in WILEY-V C H VERLAG GMBH in WEINHEIM ,Authors: Preller, T; Menzel, D; Knickmeier, S; Temel, B; Garnweitner, G. The CAS is 103-50-4. Through research, I have a further understanding and discovery of Benzyl ether. Name: Benzyl ether

The combination of materials with different magnetic properties at the nanoscale can lead to phenomena such as exchange bias via coupling effects, which shows huge potential for applications, e.g., in storage media or magnetic sensors. Whilst such structures so far are obtained via complex processes of alternating deposition from the gas phase hampering their application, their preparation from nanoparticle dispersions would not only be simplified but also enable a broad variety of possible material combinations and structures. Thereby, the processing of hard magnetic nanoparticles is challenging but can be circumvented by the use of precursor materials with subsequent phase transformation.

Bye, fridends, I hope you can learn more about C14H14O, If you have any questions, you can browse other blog as well. See you lster.. Name: Benzyl ether

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

HPLC of Formula: C14H14O. In 2020 NEW J CHEM published article about OXIDE NANOCRYSTALS SYNTHESIS; MECHANICAL-PROPERTIES; HOT-INJECTION; NANOPARTICLES; NANOSTRUCTURES; ASSEMBLIES; MONOLAYERS; ROUTE in [Re, Elisa; Le Goff, Xavier; Toquer, Guillaume; Maynadie, Jerome; Meyer, Daniel] Univ Montpellier, CEA, ENSCM, CNRS,ICSM, Marcoule, France in 2020, Cited 61. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4.

Obtaining bulk materials ordered at the nanoscale using nanoparticles as building blocks is a new challenge for scientists and is of primary interest in some research areas. In this study, we developed a simple one-pot route towards nanostructured hybrid materials based on uranium oxide through a non-hydrolytic condensation process under mild solvothermal conditions (T = 160 degrees C) using ditopic organic linkers as structuring agents. The obtained materials present a sand rose morphology composed of agglomerated nanometric sheets with a lamellar substructure. Nanometric sheets are composed of inorganic fringes consisting of a studtite phase [(UO2)O-2(H2O)(2)]center dot 2H(2)O that alternates with organic fringes formed by the structuring organic linker. A multiparametric study based on SAXS experiments and TEM analyses has highlighted the control of structural parameters by varying some synthesis conditions. The interlamellar distances are tunable from 1.60 nm to 1.94 nm through the length of the structuring linker and the inter-sheet distance from 1.85 nm to 2.10 nm through synthesis temperature. This efficient one-pot route appears to be very promising for the production of tunable multiscale nanostructured hybrid materials and can be implemented in many research areas, paving the way for various applications.

Welcome to talk about 103-50-4, If you have any questions, you can contact Re, E; Le Goff, X; Toquer, G; Maynadie, J; Meyer, D or send Email.. HPLC of Formula: C14H14O

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

An article Chemically synthesizing exchange-coupled SmCo5/Sm2Co17 nanocomposites WOS:000555376300004 published article about MAGNETIC-PROPERTIES in [Xu, Yao-Hui; Jiang, Qiang] Leshan Normal Univ, Sch Phys & Elect Engn, Lab Funct Mat, Leshan 614004, Peoples R China; [Li, Kun] Southeast Univ, Sch Mech Engn, Jiangsu Key Lab Design & Manufacture Micronano B, Nanjing 211189, Peoples R China; [Ma, Zhen-Hui] Beijing Univ Technol, Key Lab Adv Funct Mat, Coll Mat Sci & Engn, Minist Educ China, Beijing 100124, Peoples R China; [Ma, Zhen-Hui] Brown Univ, Dept Chem, Providence, RI 02912 USA in 2021, Cited 32. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4. SDS of cas: 103-50-4

A new strategy to chemically synthesize exchange-coupled SmCo5/Sm2Co17 nanocomposites by in situ decomposition of SmCox(5 < x < 8.5) is reported in this work. Our synthesis starts with the fabrication of Co/Sm2O3 (Sm to Co atomic ratio of Sm/Co = 1:4.2), which can be reduced into 40-nm SmCo5 single crystal nanoparticles by Ca under the protection of CaO, showing a high coercivity of 2.85 T and saturation magnetization (M-s) of 0.0671 A.m(2).g(-1). By changing the Sm/Co to 1:4.5, 1:4.8 and 1:5.2, SmCo5/Sm2Co17 nanocomposites with different proportions were acquired using the same process. Owing to the in situ decomposition of SmCox intermediate, the small size (both of their size less than 10 nm) and uniform phase distribution were achieved in our nanocomposites. Thus, the as-prepared nanocomposites display a strong exchange-coupling interaction. As a consequence, SmCo5/Sm2Co17(Sm/Co = 1:5.2) exhibits a coercivity of 1.23 T and enhanced M-7T(magnetization at 7 T) of 0.0812 A.m(2).g(-1), increasing by 21% than pure SmCo5. Our synthesis provides a new protocol to prepare exchange-coupled high-performance nanocomposites. SDS of cas: 103-50-4. Bye, fridends, I hope you can learn more about C14H14O, If you have any questions, you can browse other blog as well. See you lster.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Name: Benzyl ether. In 2020 J SOL-GEL SCI TECHN published article about ACETIC-ACID; NANOCLUSTER NUCLEATION; OXIDE NANOPARTICLES; ETHYLENE-GLYCOL; GROWTH; SURFACE; ADSORPTION; CRYSTALLIZATION; HYDROGENATION; DECOMPOSITION in [Staniuk, Malwina; Rechberger, Felix; Tervoort, Elena; Niederberger, Markus] Swiss Fed Inst Technol, Dept Mat, Lab Multifunct Mat, Vladimir Prelog Weg 5, CH-8093 Zurich, Switzerland in 2020, Cited 58. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4.

Benzyl alcohol is a versatile reaction medium for the synthesis of different types of nanoparticles. Its ability to act as an oxygen source gave access to metal oxide nanoparticles, while its reducing properties can be harnessed for the preparation of metals. Here we report the synthesis of Pd and PdCu nanoparticles in benzyl alcohol supplemented by a detailed mechanistic study for both systems. To elucidate the chemical formation mechanism of the Pd nanoparticles, we performed in situ attenuated total reflection ultraviolet-visible (ATR-UV-vis) and Fourier transform infrared spectroscopy (ATR-FTIR), providing information on the organic as well as on the inorganic side of the reaction. Potential gaseous products were analyzed by in situ gas chromatography (GC) and mass spectrometry (MS). We observed the formation of benzaldehyde, toluene, and dibenzyl ether as the three main organic products. The formation of the PdCu alloy nanoparticles was studied by ex situ powder X-ray diffraction (PXRD). A time-resolved study of the synthesis at 100 degrees C indicated that initially three types of particles formed, composed of an alloy with high Pd content, an alloy with high content of copper, and palladium particles, and only later in the reaction course they transformed into an alloy with a Pd-to-Cu ratio close to 1. [GRAPHICS] .

Name: Benzyl ether. Welcome to talk about 103-50-4, If you have any questions, you can contact Staniuk, M; Rechberger, F; Tervoort, E; Niederberger, M or send Email.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Recently I am researching about HYDROGEN; LIGNITE; DIPHENYLMETHANE; PRETREATMENT; TEMPERATURE; DISSOLUTION; EXTRACTION; PYROLYSIS; SCISSION; SULFUR, Saw an article supported by the Natural Scientific Foundation of ChinaNational Natural Science Foundation of China (NSFC) [21476002, 21476003, 21476004, U1710114, 20108002, 21776001]; National Key Research and Development Program of China [2018YFB0604602, 2018YFB0604603]; Natural Science Foundation of Anhui Provincial Education Department [KJ2018A0058, KJ2018A0064]; Provincial Innovative Group for Processing & Clean Utilization of Coal Resource. Published in ELSEVIER SCI LTD in OXFORD ,Authors: Lei, ZP; Dong, L; Kang, SG; Huang, YQ; Li, ZK; Yan, JC; Shui, HF; Wang, ZC; Ren, SB; Pan, CX. The CAS is 103-50-4. Through research, I have a further understanding and discovery of Benzyl ether. Category: ethers-buliding-blocks

Ionic liquids have demonstrated to be promising solvents for processing coal and biomass. Aiming to exploit ionic liquids (ILs) as media for degradation of coal, diphenylmethane (DPM), diphenyl ether (DPE), and diphenyl ketone (DPK) were used as coal-related compounds to study the degradation behaviors of weak-bond structures of coal in ionic liquids in this work. It was found that 1-sulfonic acid butyl-3-methylimidazolium 14 trifluoromethanesulfonate ([B(SO3H)mim]OTf), 1-ethyl-3-methylimidazolium acetate ([Emim]Ac) and 1-butyl-3-methyl-imidazolium chloride ([Bmim] Cl) have a significant effect on the thermal dissociation of the model compounds. [B(SO3H) mim] OTf has a significant effect on the cleavage of DPM and DPK. [Bmim] Cl promotes the cleavage of the DPE. The dissociation effect of the model compound under the action of ionic liquid increases with the increase of reaction temperature. The interaction between the oxygen-containing functional groups in the model compound promotes the respective thermal dissociation of the model compounds. Ionic liquids promote the dissociation interaction of bridge bonds in model compounds. Under the action of ionic liquids, the carbonyl bond promotes the cleavage of the methylene and ether bond cleavage, and the ether bond promotes the methylene bond cleavage.

Category: ethers-buliding-blocks. Welcome to talk about 103-50-4, If you have any questions, you can contact Lei, ZP; Dong, L; Kang, SG; Huang, YQ; Li, ZK; Yan, JC; Shui, HF; Wang, ZC; Ren, SB; Pan, CX or send Email.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Preller, T; Menzel, D; Knickmeier, S; Temel, B; Garnweitner, G in [Preller, Tobias; Knickmeier, Saskia; Temel, Bilal; Garnweitner, Georg] Tech Univ Carolo Wilhelmina Braunschweig, Inst Partikeltech, Volkmaroder Str 5, D-38104 Braunschweig, Germany; [Menzel, Dirk] Tech Univ Carolo Wilhelmina Braunschweig, Inst Phys Kondensierten Mat, Mendelssohnstr 3, D-38106 Braunschweig, Germany; [Garnweitner, Georg] Tech Univ Carolo Wilhelmina Braunschweig, Lab Emerging Nanometrol LENA, Langer Kamp 6A, D-38106 Braunschweig, Germany published Fabrication of Nanocomposite Thin Films with Special Magnetic Properties from Nanoparticle Building Blocks in 2020, Cited 58. Safety of Benzyl ether. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4.

The combination of materials with different magnetic properties at the nanoscale can lead to phenomena such as exchange bias via coupling effects, which shows huge potential for applications, e.g., in storage media or magnetic sensors. Whilst such structures so far are obtained via complex processes of alternating deposition from the gas phase hampering their application, their preparation from nanoparticle dispersions would not only be simplified but also enable a broad variety of possible material combinations and structures. Thereby, the processing of hard magnetic nanoparticles is challenging but can be circumvented by the use of precursor materials with subsequent phase transformation.

Welcome to talk about 103-50-4, If you have any questions, you can contact Preller, T; Menzel, D; Knickmeier, S; Temel, B; Garnweitner, G or send Email.. Safety of Benzyl ether

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Formula: C14H14O. In 2021 J CROHNS COLITIS published article about CROHNS-DISEASE; BIRTH OUTCOMES; ULCERATIVE-COLITIS; PRETERM BIRTH; ALPHA; RISK; EXPRESSION; MANAGEMENT; FERTILITY; RECEPTORS in [Kim, Min-A] Yonsei Univ, Gangnam Severance Hosp, Inst Womens Life Med Sci, Dept Obstet & Gynecol,Coll Med, Seoul, South Korea; [Kim, Young-Han] Yonsei Univ, Severance Hosp, Inst Womens Life Med Sci, Dept Obstet & Gynecol,Coll Med, Seoul, South Korea; [Chun, Jaeyoung] Yonsei Univ, Gangnam Severance Hosp, Dept Internal Med, Coll Med, Seoul, South Korea; [Lee, Hye Sun] Yonsei Univ, Biostat Collaborat Unit, Coll Med, Seoul, South Korea; [Park, Soo Jung; Cheon, Jae Hee; Il Kim, Tae; Kim, Won Ho; Park, Jae Jun] Yonsei Univ, Severance Hosp, Dept Internal Med, Coll Med, Seoul, South Korea in 2021, Cited 65. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4.

Background and Aims: Robust evidence regarding the impact of disease activity on pregnancy outcomes in women with inflammatory bowel disease [IBD] is crucial for both clinicians and patients in preparing a birth plan. We sought to perform a systematic review and meta-analysis to assess the pooled influences of disease activity on pregnancy outcomes in women with IBD. Methods: We searched MEDLINE, EMBASE and the COCHRANE library to identify articles comparing pregnancy outcomes between active and inactive IBD at the time of conception or during pregnancy. A meta-analysis was performed using a random-effects model to pool estimates and report odds ratios [ORs]. Results: A total of 28 studies were identified as eligible for the meta-analysis. In women with active IBD, the pooled ORs for low birth weight [LBW], preterm birth, small for gestational age [SGA], spontaneous abortion and stillbirths were respectively 3.81 (95% confidence interval [CI] 1.81-8.02), 2.42 [95% CI 1.74-3.35], 1.48 [95% CI 1.19-1.85], 1.87 [95% CI 1.17-3.0] and 2.27 [95% CI 1.03-5.04] compared to women with inactive IBD. In the subgroup analysis based on disease type, women with active ulcerative colitis had an increased risk of LBW, preterm birth and spontaneous abortion. Women with active Crohn’s disease had a higher risk of preterm birth, SGA and spontaneous abortion. Conclusions: Active IBD during the periconception period and pregnancy is associated with an increased risk of adverse pregnancy outcomes. Our data suggest that pregnancy should be planned when the disease is quiescent, and continuous disease control is important even during pregnancy.

Formula: C14H14O. About Benzyl ether, If you have any questions, you can contact Kim, MA; Kim, YH; Chun, J; Lee, HS; Park, SJ; Cheon, JH; Il Kim, T; Kim, WH; Park, JJ or concate me.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Category: ethers-buliding-blocks. Authors Aniceto, JPS; Zezere, B; Silva, CM in ELSEVIER published article about in [Aniceto, Jose P. S.; Zezere, Bruno; Silva, Carlos M.] Univ Aveiro, CICECO, Dept Chem, P-3810193 Aveiro, Portugal in 2021, Cited 39. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4

The molecular diffusion coefficient is fundamental to estimate dispersion coefficients, convective mass transfer coefficients, etc. Since experimental diffusion data is scarce, there is significant demand for accurate models capable of providing reliable diffusion coefficient estimations. In this work we applied machine learning algorithms to develop predictive models to estimate diffusivities of solutes in supercritical carbon dioxide. A database of experimental data containing 13 properties for 174 binary systems totaling 4917 data points was used in the training of the models. Five machine learning algorithms were evaluated and the results were compared with three commonly used classic models. The best results were found using the Gradient Boosted algorithm which showed an average absolute relative deviation (AARD) of 2.58 % (pure prediction). This model has five parameters: temperature, density, solute molar mass, solute critical pressure and solute acentric factor. For the same dataset, the classic Wilke-Chang equation showed AARD of 12.41 %. The developed model is provided as command line program. (C) 2021 Elsevier B.V. All rights reserved.

Welcome to talk about 103-50-4, If you have any questions, you can contact Aniceto, JPS; Zezere, B; Silva, CM or send Email.. Category: ethers-buliding-blocks

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem