Category: 103-50-4

Authors Manohar, A; Krishnamoorthi, C; Pavithra, C; Thota, N in SPRINGER published article about SUPERPARAMAGNETIC NATURE; FERROELECTRIC PROPERTIES; MNFE2O4 NANOPARTICLES; TEMPERATURE; DESIGN in [Manohar, A.; Krishnamoorthi, C.] Vellore Inst Technol, Ctr Nanotechnol Res, Vellore 632014, Tamil Nadu, India; [Manohar, A.] Korea Univ, Dept Mat Sci & Engn, 145 Anam Ro, Seoul 02841, South Korea; [Pavithra, C.] Marudhar Kesari Jain Coll, Dept Phys, Vaniyambadi 635752, Tamil Nadu, India; [Thota, Narayana] Indian Inst Sci, Solid State & Struct Chem, Bengaluru 560012, India in 2021, Cited 44. Quality Control of Benzyl ether. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4

Development of new superparamagnetic materials with narrow size distribution is crucial for biomedical and environmental applications. Hence, we report the synthesis of narrow size distributed single grain MnFe(2)O(4)nanoparticles of average particle size 9 nm by solvothermal reflux method. Synthesized compound crystallized in face centered cubic spinel structure and is confirmed by X-ray diffraction profiles. Transmission electron micrograph shows narrow size distributed particles with an average particle size of 9 nm and is equal to crystallite diameter estimated from Scherrer equation. The spinel crystal structure is further confirmed by electron diffraction profiles, Fourier transformed infrared spectrum, and Raman spectrum at room temperature. Magnetic properties of the sample show superparamagnetic nature at room temperature with moderate saturated magnetization of 56.4 emug(-1). Magnetic heating properties of nanoparticles dispersion show the attainment of hyperthermia temperature (43 degrees C) in a short span of time of 1.6 min for 2 mg/mL and 2.6 min for 1 mg/mL concentrations. Estimated specific heat generation rate or specific power absorption rate, from temporal temperature plots, is 145.78 Wg(-1)and is useful for magnetic hyperthermia application in cancer therapy. Photocatalysis properties of sample show 96% of rhodamine B dye degradation in little less than 6 h under UV light irradiation and are useful for photocatalytic applications in wastewater treatment in industries.

Quality Control of Benzyl ether. Bye, fridends, I hope you can learn more about C14H14O, If you have any questions, you can browse other blog as well. See you lster.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

An article Highly Efficient and Selective N-Alkylation of Amines with Alcohols Catalyzed by in Situ Rehydrated Titanium Hydroxide WOS:000518876300052 published article about C-O BOND; SECONDARY ALCOHOLS; DIRECT AMINATION; MECHANISM; ETHERS; CLEAVAGE; HYDROAMINATION; DEHYDRATION; HYDROLYSIS; COUPLINGS in [Niu, Feng; Wang, Qiyan; Khodakov, Andrei Y.] Univ Artois, Univ Lille, CNRS, Cent Lille,ENSCL,UCCS,UMR 8181, F-59000 Lille, France; [Niu, Feng; Wang, Qiyan; Yan, Zhen; Kusema, Bright T.; Ordomsky, Vitaly V.] CNRS Solvay, UMI 3464, E2P2L, Shanghai 201108, Peoples R China in 2020, Cited 69. Safety of Benzyl ether. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4

Catalytic N-alkylation of amines by alcohols to produce desired amines is an important catalytic reaction in industry. Various noble-metal-based homogeneous and heterogeneous catalysts have been reported for this process. The development of cheap non-noble-metal heterogeneous catalysts for the N-alkylation reaction would be highly desirable. Hereby, we propose the N-alkylation of amines by alcohols over a cheap and efficient heterogeneous catalyst-titanium hydroxide. This catalyst provides a selectivity higher than 90% to secondary amines for functionalized aromatic and aliphatic alcohols and amines with high catalytic activity and stability. Mild Bronsted acidity formed by the continuous rehydration of Lewis acidity excludes the side reactions and deactivation by adsorbed species. The mechanism of the reaction involves dehydration of alcohols to ethers with subsequent C-O bond cleavage by amine with the formation of secondary amine and recovery of alcohol.

Safety of Benzyl ether. Welcome to talk about 103-50-4, If you have any questions, you can contact Niu, F; Wang, QY; Yan, Z; Kusema, BT; Khodakov, AY; Ordomsky, VV or send Email.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Nguyen, VHH; Doan, SH; Van, TT; Pham, PH; Nguyen, TTN; Nguyen, NN; Tu, TN; Phan, NTS in [Nguyen, Vu H. H.; Doan, Son H.; Van, Tram T.; Pham, Phuc H.; Nguyen, Tran T. N.; Phan, Nam T. S.] HCMC Univ Technol, VNU HCM, Fac Chem Engn, 268 Ly Thuong Kiet,Dist 10, Ho Chi Minh City, Vietnam; [Nguyen, Ngoc N.; Tu, Thach N.] VNU HCM, Ctr Innovat Mat & Architectures, Linh Trung Ward, Quarter 6, Ho Chi Minh City, Vietnam published A new route to triphenylpyridines utilizing ketoximes as building blocks via cascade reactions under iron-organic framework catalysis in 2019, Cited 44. Category: ethers-buliding-blocks. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4.

Iron-based metal-organic framework VNU-20 was utilized as a heterogeneous catalyst for cascade reactions between ketoximes and dibenzyl ether to produce 2,4,6-triphenylpyridines. Additionally, benzyl alcohol and (dimethoxymethyl) benzene could be used as an alternative starting materials for the transformation. The oxidant exhibited a remarkable impact on the reactions, and di-tertbutylperoxide was the most appropriate candidate. The VNU-20 displayed higher efficiency than many homogeneous and heterogeneous catalysts. The catalyst was reusable for the cascade reactions without a noticeable deterioration in catalytic activity. This transformation is new, and would offer alternative routes to triphenylpyridines utilizing ketoximes as building blocks.

Welcome to talk about 103-50-4, If you have any questions, you can contact Nguyen, VHH; Doan, SH; Van, TT; Pham, PH; Nguyen, TTN; Nguyen, NN; Tu, TN; Phan, NTS or send Email.. Category: ethers-buliding-blocks

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Formula: C14H14O. Recently I am researching about STRUCTURE-DIRECTING AGENTS; HIGH-SILICA CHABAZITE; INTERZEOLITE CONVERSION; FAU ZEOLITE; CHA ZEOLITE; CATALYTIC PERFORMANCE; STABILITY; TRANSFORMATIONS; ALUMINOSILICATE; NOX, Saw an article supported by the . Published in ELSEVIER SCIENCE BV in AMSTERDAM ,Authors: Tanigawa, T; Tsunoji, N; Sadakane, M; Sano, T. The CAS is 103-50-4. Through research, I have a further understanding and discovery of Benzyl ether

Zeolite synthesis using faujasite-type (FAU) zeolites as the starting silica/alumina source in the presence of various organic structure-directing agents (OSDAs) with cyclic alkylammonium structures was investigated. The obtained zeolite phases strongly depended on the structure of the OSDA and the Si/Al ratio of the starting FAU. Zeolites with different framework structures, such as BEA, MFI, CHA, and LEV, were obtained. Among the used OSDAs, methylpropylpyrrolidinium, butylmethylpyrrolidinium, and methylpropylpiperidinium effectively produced nanosized BEA and MFI zeolites, whereas dimethylpiperidinium and cyclohexyltrimethylammonium produced CHA and LEV zeolites, respectively. The nanosized MFI and BEA zeolites obtained through zeolite hydrothermal conversion exhibited remarkably smaller particle sizes and higher external surface area as compared to those of the conventional MFI and BEA zeolite samples synthesized using tetrapropylammonium and tetraethylammonium, respectively. We also found that the highly crystalline nanosized BEA and MFI zeolites exhibited better catalytic performance in the dehydration of benzyl alcohol to benzyl ether as compared to the conventional zeolites with large particle sizes. In addition, nanosized MFI zeolites, synthesized using FAU as a starting material and cyclic ammonium compounds, showed catalytic activities superior to those of the nano sized MFI zeolites synthesized from amorphous starting materials and cyclic ammonium compounds.

Formula: C14H14O. Welcome to talk about 103-50-4, If you have any questions, you can contact Tanigawa, T; Tsunoji, N; Sadakane, M; Sano, T or send Email.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Recently I am researching about EFFECTIVE CATALYST; CARBONYL-COMPOUNDS; BENZYLIC ALCOHOLS; BROMOSUCCINIMIDE; ALKYLATION; STRATEGY; NBS, Saw an article supported by the Slovene Human Resources Development and Scholarship Fund [11011-9/2011]; Slovenian Research AgencySlovenian Research Agency – Slovenia [P1-0134]. Safety of Benzyl ether. Published in MDPI in BASEL ,Authors: Ajvazi, N; Stavber, S. The CAS is 103-50-4. Through research, I have a further understanding and discovery of Benzyl ether

N-halosuccinimides (chloro, bromo, and iodo, respectively) were introduced, tested, and applied as efficient and non-metal precatalysts for C-, N-, O-, and X-nucleophilic substitution reactions of alcohols under solvent-free reaction conditions (SFRC) or under high substrate concentration reaction conditions (HCRC) efficiently and selectively, into the corresponding products.

Safety of Benzyl ether. Welcome to talk about 103-50-4, If you have any questions, you can contact Ajvazi, N; Stavber, S or send Email.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Sarno, M; Ponticorvo, E in [Sarno, Maria] Univ Salerno, Dept Ind Engn, Via Giovanni Paolo II 132, I-84084 Fisciano SA, Italy; Univ Salerno, NANO MATES Res Ctr, Via Giovanni Paolo II 132, I-84084 Fisciano SA, Italy published High hydrogen production rate on RuS2@ MoS2 hybrid nanocatalyst by PEM electrolysis in 2019, Cited 58. SDS of cas: 103-50-4. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4.

A new nanocatalyst, which combines the electrocatalytic activity of MoS2 nanosheets and RuS2 nanoparticles (NPs), was prepared through a safe and scalable, one-step bottom-up approach. It delivers high current density, with a Tafel slope of 36 mV/dec and a very small overpotential. The high exposure of MoS2 edges on the RuS2 NPs, the stronger d character of RuS2 and the electrical coupling of these two nanomaterials, grown together, were responsible for the high hydrogen production rates of 10.21/h (PEM cell 5cm x 5 cm, current density about 1.1 A/cm(2), power consumption 41.8 W, corresponding to 3.8 KWh/Nm(3) of energy consumption, efficiency 93%). (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Welcome to talk about 103-50-4, If you have any questions, you can contact Sarno, M; Ponticorvo, E or send Email.. SDS of cas: 103-50-4

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

I found the field of Chemistry very interesting. Saw the article A method of detecting two tumor markers (p-hydroxybenzoic acid and p-cresol) in human urine using a porous magnetic < beta > -cyclodextrine polymer as solid phase extractant, an alternative for early gastric cancer diagnosis published in 2019. Application In Synthesis of Benzyl ether, Reprint Addresses He, H (corresponding author), China Pharmaceut Univ, Dept Analyt Chem, 24 Tongjia Lane, Nanjing 210009, Jiangsu, Peoples R China.. The CAS is 103-50-4. Through research, I have a further understanding and discovery of Benzyl ether

Analyzing of tumor markers has become an important means for cancer diagnosis and prevention. In this study, a novel solid phase extraction based on porous magnetic cyclodextrin polymer (MA-CD) was developed and used for detection of trace small molecule gastric tumor markers in urine samples. The adsorption properties of the magnetic cyclodextrin polymer were tested. Through experiments of the solid phase extraction (SPE) at the different condition, the optimal condition was selected to test the two tumor markers by High-performance liquid chromatography -Diode array detector (HPLC-DAD). The analytical performance of the method showed good accuracy (88.82%-104.34%) and precision (< 3.55%), appropriated detection limits (1.016 and 5.714 mu g L-1) and linear ranges (0.6-24.0 mu g L-1) with convenient determination coefficients (> 0.9994). The results demonstrated that the developed approach is efficient, low-cost for gastric tumor markers detection.

Application In Synthesis of Benzyl ether. Welcome to talk about 103-50-4, If you have any questions, you can contact Shi, Y; Zhang, JY; He, J; Liu, DH; Meng, XY; Huang, T; He, H or send Email.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

In 2020 MICROPOR MESOPOR MAT published article about MOLECULAR-SIEVES; MORDENITE ZEOLITES; MESOPOROSITY; DESILICATION; PERFORMANCE; CRYSTALS; METHANOL in [Fan, Dong; Cao, Kaipeng; Sun, Lijing; Xu, Shutao; Tian, Peng; Liu, Zhongmin] Chinese Acad Sci, Dalian Inst Chem Phys, Natl Engn Lab Methanol Olefins, Dalian Natl Lab Clean Energy, Dalian 116023, Peoples R China; [Qiao, Yuyan] China Natl Chem Engn Co Ltd CNCEC, China Chem Technol Res Inst, Beijing 100007, Peoples R China; [Cao, Kaipeng; Sun, Lijing] Chinese Acad Sci, Univ Chinese Acad Sci, Beijing 100049, Peoples R China in 2020, Cited 32. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4. Formula: C14H14O

Hierarchical SAPO-18 molecular sieve was successfully post-synthesized in the alkaline tetraethyl ammonium hydroxide (TEAOH) solution and hydrochloride (HCl) acid solution. In the TEAOH solution, preferential dissolution occurs surrounding the defect sites in a controlled manner, leading to hierarchical SAPO-18 with wellpreserved chemical compositions and crystallinities. In acidic solution, the dissolution is revealed to be sensitive to both the defects and the chemical compositions (selective dissolution of the Si-O-Al domains), which cooperatively contribute to the generation of meso-/macropores in the crystals. The crystallization of SAPO-18 precursor is thus inferred to proceed via an oriented nanoparticle attachment mechanism in the early stage. The twinning and intergmwth of nanoparticles occur in an ordered way, leading to the oriented arrangement of the crystallite boundaries. The defects located at the intergrowth interface are prone to acid/alkaline attacks, and play crucial role in the development of hierarchical pore systems. The hierarchical SAPO-18 sample exhibits excellent catalytic reaction performance in the liquid phase benzylation reaction of benzene and benzyl alcohol.

Formula: C14H14O. Welcome to talk about 103-50-4, If you have any questions, you can contact Fan, D; Qiao, YY; Cao, KP; Sun, LJ; Xu, ST; Tian, P; Liu, ZM or send Email.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Quality Control of Benzyl ether. Yu, J; Nap, RJ; Szleifer, I; Wong, JY in [Yu, Jin; Wong, Joyce Y.] Boston Univ, Div Mat Sci & Engn, Boston, MA 02215 USA; [Nap, Rikkert J.; Szleifer, Igal] Northwestern Univ, Dept Biomed Engn, Evanston, IL 60208 USA; [Nap, Rikkert J.; Szleifer, Igal] Northwestern Univ, Chem Life Proc Inst, Evanston, IL 60208 USA; [Wong, Joyce Y.] Boston Univ, Dept Biomed Engn, Boston, MA 02215 USA published Effect of Polymer Surface Modification of Superparamagnetic Iron Oxide Nanoparticle Dispersions in High Salinity Environments in 2019, Cited 23. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4.

Superparamagnetic nanoparticles (SPIONs) can be used as nuclear magnetic resonance (NMR) signal enhancement agents for petroleum exploration. This enhancement effect is uniform if SPIONs are monodisperse in size and in composition; yet it is challenging to synthesize mono disperse particles that do not aggregate in high salinity petroleum brine. Here, we report a method to synthesize individual SPIONs coated with tunable surface coating densities of poly(2-acrylamido-2-methyl-1-propanesulfonic acid (pAMPS) with a catechol end-group (pAMPS*). To establish parameters under which pAMPS*-coated SPIONS do not aggregate, we compared computational predictions with experimental results for variations in pAMPS* chain length and surface coverage. Using this combined theoretical and experimental approach, we show that singly dispersed SPIONs remained stabilized in petroleum brine for up to 75 h with high surface density pAMPS*.

Welcome to talk about 103-50-4, If you have any questions, you can contact Yu, J; Nap, RJ; Szleifer, I; Wong, JY or send Email.. Quality Control of Benzyl ether

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Authors Monsigny, L; Thuery, P; Berthet, JC; Cantat, T in AMER CHEMICAL SOC published article about RING-OPENING POLYMERIZATION; METAL-FREE; CRYSTAL-STRUCTURE; REDUCTIVE DEPOLYMERIZATION; CARBONYL-COMPOUNDS; ALDOL CONDENSATION; SYMMETRIC ETHERS; CARBOXYLIC-ACIDS; CYCLOTRIMERIZATION; ETHERIFICATION in [Monsigny, Louis; Thuery, Pierre; Berthet, Jean-Claude; Cantat, Thibault] Univ Paris Saclay, CEA Saclay, CNRS, NIMBE,CEA, F-91191 Gif Sur Yvette, France in 2019, Cited 76. Name: Benzyl ether. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4

We report herein the possibility to perform the hydrosilylation of carbonyls using actinide complexes as catalysts. While complexes of the uranyl ion [UO2](2+) have been poorly considered in catalysis, we show the potentialities of the Lewis acid [UO2(OTf)(2)] (1) in the catalytic hydrosilylation of a series of aldehydes. [UO2(OTf)(2)] proved to be a very active catalyst affording distinct reduction products depending on the nature of the reductant. With Et3SiH, a number of aliphatic and aromatic aldehydes are reduced into symmetric ethers, while (Pr3SiH)-Pr-i yielded silylated alcohols. Studies of the reaction mechanism led to the isolation of aldehyde/uranyl complexes, [UO2(OTf)(2)(4-Me2N-PhCHO)(3)], [UO2(mu-kappa(2)-OTf)(2)(PhCHO)](n), and [UO2(mu-kappa(2)-OTf(kappa(1)-OTf)(PhCHO)(2)](2), which have been fully characterized by NMR, IR, and single-crystal X-ray diffraction.

Bye, fridends, I hope you can learn more about C14H14O, If you have any questions, you can browse other blog as well. See you lster.. Name: Benzyl ether

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem