Category: 150-78-7

Enzymes are biological catalysts that produce large increases in reaction rates and tend to be specific for certain reactants and products. 150-78-7, Name is 1,4-Dimethoxybenzene, molecular formula is C8H10O2, belongs to ethers-buliding-blocks compound. In a document, author is Thakur, D. A., introduce the new discover, Safety of 1,4-Dimethoxybenzene.

Removal of Tc-99 from low level radioactive liquid waste using di-tert-butyldibenzo-18-crown-6 impregnated sorbent

Low level radioactive liquid waste (LLW) is generated at different stages of operation of reprocessing as well as radioactive waste management. The LLW generated here is alkaline with high salt content. It contains different radioisotopes namely(106)Ru, Sb-125, Tc-99, Cs-137, Sr-90 and traces of Pu. Presence of Tc-99 in LLW is of great environmental concern due to its long half-life (T-1/2: 2 x 10(5) years) and mobility. Hence it needs to be separated from LLW to maximum possible extent prior to discharge to environment. In this paper, study carried out for separation of Tc-99 using the crown ether, Di-tert-Butyldibenzo-18-Crown-6 (DtBuDB18C6). The performance of the composite material was evaluated with respect to Tc-99 uptake and the effect of various parameters like pH, salt concentration, time period and temperature on K-d value was studied.

Balanced chemical reaction does not necessarily reveal either the individual elementary reactions by which a reaction occurs or its rate law. In my other articles, you can also check out more blogs about 150-78-7. Safety of 1,4-Dimethoxybenzene.

The reaction rate of a catalyzed reaction is faster than the reaction rate of the uncatalyzed reaction at the same temperature. 150-78-7, Name is 1,4-Dimethoxybenzene, SMILES is COC1=CC=C(OC)C=C1, in an article , author is Wu, Jie, once mentioned of 150-78-7, Application In Synthesis of 1,4-Dimethoxybenzene.

Polyurethane coatings cured via azide-alkyne cycloaddition using reduced-viscosity poly(alkynyl carbamate) prepolymers

Alternative crosslinking polyurethanes (ACPUs) were created by reacting a commercial allophanate-modified polyisocyanate with propargyl alcohol to yield a poly(alkynyl carbamate); a polyazide co-reactant was created from an acrylic polyol. Conversion of the polyisocyanate into the corresponding poly(propargyl carbamate) resulted in a dramatic viscosity increase. Poly(alkynyl carbamate) prepolymers with lower viscosities were designed by replacing various fractions of the propargyl alcohol with commercial glycol ether plasticizers, ethylene glycol monoethyl ether (EGMEE), diethylene glycol monomethyl ether (DEGMEE), and diethyleneglycol monobutyl ether (DEGBE). Triethylene glycol monopropargyl ether was also studied to provide plasticization with no sacrifice of alkyne functionality. For each commercial glycol ether plasticizer, viscosity was unaffected or increased at a loading level of 10 mol%. At 25 mol%, average viscosity reduction was 36 %, with DEGBE yielding the greatest reduction at 55 %. At 33 mol%, no further decreases were observed. Triethylene glycol monopropargyl ether yielded a 76 % reduction in viscosity at 33 mol%; 100 mol% substitution yielded no further reduction. Coatings produced from the modified poly(alkynyl carbamate)s were softer and displayed lower glass transition temperatures compared to a polyisocyanate/polyol control and a 100 % propargylated poly(alkynyl carbamate)/polyazide control. Solvent resistance of the modified coatings was the same as the controls except for those created from DEGBE and from DEGMEE at 33 mol%.

Interested yet? Read on for other articles about 150-78-7, you can contact me at any time and look forward to more communication. Application In Synthesis of 1,4-Dimethoxybenzene.

Reference of 150-78-7, The chemical industry reduces the impact on the environment during synthesis 150-78-7, name is 1,4-Dimethoxybenzene, I believe this compound will play a more active role in future production and life.

EXAMPLE 61 (+,-)-N-(cis-2-(3,6-dimethoxy-2-fluorophenyl)-cyclopropyl)-N’-(5-chloropyrid-2-yl)-urea To a solution of 1,4-dimethoxybenzene (15.0 g, 0.109 mol) in 300 mL of dry THF was added 2.5M n-butyllithium (45.6 mL, 0.114 mol) at room temperature under nitrogen. After addition was complete, the solution was stirred for 1 hr. The mixture was cooled to -70 C. and N-fluorobenzenesulfonimide (36.0 g, 0.114 mol) in 150 mL of THF was added slowly, keeping the temperature below -60 C. The solution was allowed to warm to room temperature during the night. 100 mL of NH4 Cl (sat) was added and the mixture was extracted with diethyl ether/THF. The organic phase was washed with 1M NaOH (2*60 mL), dried over MgSO4 and evaporated. Column chromatography (silica gel, n-hexane followed by 1, 5 and 10% EtOAc in n-hexane) provided 11.43 g of a mixture of 1,4-dimethoxy-2-fluorobenzene and 1,4-dimethoxybenzene (4.3:1). This mixture was reacted in a manner analogous to Examples 362, 375 and 348 of WO 93/03022 to give (+,-)-cis-2-(3,6-dimethoxy2-fluorophenyl) cyclopropylamine.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,4-Dimethoxybenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Medivir AB; US5849769; (1998); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 150-78-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 150-78-7, name is 1,4-Dimethoxybenzene belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a solution of 1,4- dimethoxybenzene Q-8 (7.5 g, 53.57 mmol) in acetic acid (25 mL) was added a solution of bromine (17.4 g, 108.9 mmol) in acetic acid (5 mL) at room temperature. After stirring for 2h, the solution was cooled to 10 0C. The resulting fine precipitate was filtered, washed with water (20 mL), and dried under vacuum to obtain compound Q-9 (1Og, 63%) as a white solid. TLC Rf = 0.5 (petroleum ether – EtOAc, 9.9:0.1); 1H NMR (CDCl3) delta 7.10 (s, 2H), 3.84 (s, 6H).

The synthetic route of 1,4-Dimethoxybenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SLOAN-KETTERING INSTITUTE FOR CANCER RESEARCH; DJABALLAH, Hakim; ANTCZAK, Christophe; WO2010/129049; (2010); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

150-78-7, The chemical industry reduces the impact on the environment during synthesis 150-78-7, name is 1,4-Dimethoxybenzene, I believe this compound will play a more active role in future production and life.

To a solution of 1,4- dimethoxybenzene Q-8 (7.5 g, 53.57 mmol) in acetic acid (25 mL) was added a solution of bromine (17.4 g, 108.9 mmol) in acetic acid (5 mL) at room temperature. After stirring for 2h, the solution was cooled to 10 0C. The resulting fine precipitate was filtered, washed with water (20 mL), and dried under vacuum to obtain compound Q-9 (1Og, 63%) as a white solid. TLC Rf = 0.5 (petroleum ether – EtOAc, 9.9:0.1); 1H NMR (CDCl3) delta 7.10 (s, 2H), 3.84 (s, 6H).

The chemical industry reduces the impact on the environment during synthesis 1,4-Dimethoxybenzene. I believe this compound will play a more active role in future production and life.

Reference:
Patent; SLOAN-KETTERING INSTITUTE FOR CANCER RESEARCH; DJABALLAH, Hakim; ANTCZAK, Christophe; WO2010/129049; (2010); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem