Category: 22094-18-4

Some common heterocyclic compound, 22094-18-4, name is 1,3-Dibromo-2,2-dimethoxypropane, molecular formula is C5H10Br2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 22094-18-4

To a suspension of NaH (4.1 g, 100 mmol) (60% in mineral oil) in DMF (100 mL) was added 2-(4-bromophenyl)acetonitrile (10 g, 51 mmol) followed by l,3-dibromo-2,2-dimethoxypropane (11 g, 42 mmol). The reaction mixture was heated to 60 C for 12 h. After 12 h the reaction mixture was diluted with water (1000 mL) and washed with EtOAc (400 mLx2). The combined organics were washed with brine (100 mL), dried over anhydrous Na2SC>4, and concentrated under reduced pressure. The residue was purified by flash chromatography on silica (petroleum ether : EtOAc = 50: 1 to 20: 1) to afford 1-(4-bromophenyl)-3,3-dimethoxycyclobutanecarbonitrile. MS (ESI) Calc’d [M+H]+, 296; found, 296.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 22094-18-4, its application will become more common.

Reference:
Patent; MERCK SHARP & DOHME CORP.; MCGOWAN, Meredeth Ann; ACHAB, Abdelghani; FRADERA, Xavier; HAN, Yongxin; LI, Derun; LIM, Jongwon; LIU, Kun; SCIAMMETTA, Nunzio; WHITE, Catherine, M.; YU, Wensheng; ZHANG, Hongjun; ZHOU, Hua; (109 pag.)WO2019/74747; (2019); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 22094-18-4, A common heterocyclic compound, 22094-18-4, name is 1,3-Dibromo-2,2-dimethoxypropane, molecular formula is C5H10Br2O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 129A 3,3-dimethoxy-1-[4-(trifluoromethoxy)phenyl]cyclobutanecarboxamide 2-[4-(Trifluoromethoxy)phenyl]acetonitrile (7.86 mL, 50 mmol), 1,3-dibromo-2,2-dimethoxypropane (13.10 g, 50.0 mmol), and sodium tert-butoxide (10.57 g, 110 mmol) were dissolved in DMSO (100 mL) and water (5 mL), and the mixture was heated for 1 hour at 125 C. The reaction was cooled to ambient temperature and stirred overnight. The reaction mixture was diluted with water and extracted three times with diethyl ether. The combined organic layers were washed with brine, dried with MgSO4, filtered, and concentrated to give the title compound (17.02 g, 53.3 mmol, 107% yield). MS (DCI+): m/z 320.1 (M+H), 337.1 (M+NH4). 1FINMR (300 MHz, DMSO-d6) delta 7.44 (d, J=8.8 Hz, 2H), 7.34 (s, 1H), 7.31 (d, J=8.8 Hz, 2H), 6.90 (s, 1H), 3.05 (s, 3H), 3.02-2.93 (m, 5H), 2.41 (d, J=13.4 Hz, 2H).

The synthetic route of 22094-18-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AbbVie Inc.; Bayburt, Erol K.; Clapham, Bruce; Cox, Phil B.; Daanen, Jerome F.; Dart, Michael J.; Gfesser, Gregory A.; Gomtsyan, Arthur; Kort, Michael E.; Kym, Philip R.; Schmidt, Robert G.; Voight, Eric A.; US2014/80803; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 22094-18-4, These common heterocyclic compound, 22094-18-4, name is 1,3-Dibromo-2,2-dimethoxypropane, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 314A: 1-(4-Bromophenyl)-3,3-dimethoxycyclobutanecarbonitrile To a suspension of NaH (0.733 g, 18.32 mmol, 60% in mineral oil) in DMF (14 mL) was added 2-(4-bromophenyl)acetonitrile (1.796 g, 9.16 mmol) followed by 1,3-dibromo-2,2-dimethoxypropane (2.0 g, 7.64 mmol) and the reaction mixture was heated to 60 C. and stirred for 12 h. The reaction mixture was cooled to RT, poured into water (150 mL) and extracted with EtOAc (3*40 mL). The combined organic layer was washed with brine, dried over Na2SO4, filtered and the filtrate concentrated. The crude product was purified by silica gel chromatography (24 g REDISEP column, eluting with 5% EtOAc in hexane). Fractions containing the product were combined and evaporated to afford Intermediate 314A as a white solid (2 g, 88%). 1H NMR (300 MHz, DMSO-d6) delta ppm 7.68-7.57 (m, 2H), 7.46-7.40 (m, 2H), 3.18 (s, 3H), 3.08 (s, 1H), 3.07 (s, 3H), 3.05-3.02 (m, 1H), 2.74-2.71 (m, 1H), 2.70-2.67 (m, 1H).

Statistics shows that 1,3-Dibromo-2,2-dimethoxypropane is playing an increasingly important role. we look forward to future research findings about 22094-18-4.

Reference:
Patent; Bristol-Myers Squibb Company; Velaparthi, Upender; Darne, Chetan Padmakar; Liu, Peiying; Wittman, Mark D.; Pearce, Bradley C.; Araujo, Erika M. V.; Dasgupta, Bireshwar; Nair, Jalathi Surendran; Janakiraman, Sakthi Kumaran; Rachamreddy, Chandrasekhar Reddy; Rao, Mettu Mallikarjuna; Karuppiah, Arul Mozhi Selvan Subbiah; Reddy, Bandreddy Subba; Nagalakshmi, Pulicharla; Bora, Rajesh Onkardas; Maheshwarappa, Shilpa Holehatti; Kumaravel, Selvakumar; Mullick, Dibakar; Sistla, Ramesh; (353 pag.)US9273058; (2016); B2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 22094-18-4,Some common heterocyclic compound, 22094-18-4, name is 1,3-Dibromo-2,2-dimethoxypropane, molecular formula is C5H10Br2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 2-(2,5-difluoro-4-methylphenyl)acetonitrile (16.7 g, 100 mmol) in DMSO (200 mL) was added NaH (8 g, 200 mmol, 60% oil dispersion), portion-wise, at RT. The reaction was stirred for 1 h at RT, and then 1,3-dibromo-2,2-dimethoxypropane (39.3 g, 150 mmol) was added. The mixture was heated at 60 C for 6 h. The reaction was quenched with water (100 mL) at 0 C and extracted with EtOAc (2 x 100 mL). The organic extracts werecombined and washed with brine (2 x 50 mL), dried over Na2504, filtered, and concentrated under reduced pressure. The residue was purified by silica gel chromatography using petroleumn ether/EtOAc (4/1) as eluting solvents to afford the title compound as a yellow solid (12 g, 45% yield). ?H NMR(400 MHz, DMSO-d6)oe 7.36-7.28(m, 2H), 3.18(s, 3H), 3.05(s, 3H), 3.03 (d, J= 13.6 Hz, 2H), 2.77 (d, J= 13.6 Hz, 2H), 2.24 (d, J= 1.6 Hz, 3H). LCMS (ESI): mlz = 268.0[M+Hj.

The synthetic route of 22094-18-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; RENE, Olivier; FAUBER, Benjamin; VESEY, David; WINSHIP, Paul; LADDUWAHETTY, Tammy; (97 pag.)WO2017/5668; (2017); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 22094-18-4, name is 1,3-Dibromo-2,2-dimethoxypropane, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 22094-18-4, Safety of 1,3-Dibromo-2,2-dimethoxypropane

To a stirred suspension of NaH (11.7 g, 293 mmol, 60% purity) in DMF (100 ml) was added diisopropylmalonic ester dropwise, keeping the temperature below 40 0C. The resulting mixture was stirred for 1 h at RT and then l,3-dibromo-2,2-dimethoxypropane (34.8 g, 133 mmol) was added in one portion. The resulting mixture was heated at 140 0C for 24 h and then cooled to RT. Saturated NH4Cl aqueous (400 ml) was added and the mixture extracted with hexane (2 x 190 ml). The combined organic phases were washed with H2O (2 x 250 ml) saturated NaHCO3 (2 x 250 ml), H2O (2 x 250 ml) and brine (250 ml). The organic phase was dried (Na2SO4), filtered and concentrated at reduced pressure to provide an orange oil. Purification by in vacuo distillation to remove excess of l,3-dibromo-2,2-dimethoxypropane (b.p. 60-62 0C, 0.1 mniHg) and diisopropylmalonic ester (b.p 78-80 0C, 0.1 mmHg) provided the title compound (20 g, 52%) as orange oil in the distillation flask. MS data: Calculated MH+ (289); Found 100% (MH+) m/z 289.NMR data: 1H NMR (360 MHz, CHLOROFORM- d) delta ppm 5.07 (2 H, spt, J=6.3 Hz), 3.16 (6 H, s), 2.70 (4 H, s), 1.24 (12 H, d, J=6.4 Hz).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,3-Dibromo-2,2-dimethoxypropane, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; EVOTEC NEUROSCIENCES GMBH; WO2009/135842; (2009); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Some common heterocyclic compound, 22094-18-4, name is 1,3-Dibromo-2,2-dimethoxypropane, molecular formula is C5H10Br2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C5H10Br2O2

3 ,3 -dimethoxy- 1 – [4-(trifluoromethoxy)phenyl]cyclobutanecarboxamide [1291] 2-[4-(Trifluoromethoxy)phenyl]acetonitrile (7.86 mL, 50 mmol), 1,3- dibromo-2,2-dimethoxypropane (13.10 g, 50.0 mmol), and sodium tert-butoxide (10.57 g, 1 10 mmol) were dissolved in DMSO (100 mL) and water (5 mL), and the mixture was heated for 1 hour at 125 C. The reaction was cooled to ambient temperature and stirred overnight. The reaction mixture was diluted with water and extracted three times with diethyl ether. The combined organic layers were washed with brine, dried with MgS04, filtered, and concentrated to give the title compound (17.02 g, 53.3 mmol, 107% yield). MS (DCI+): m/z 320.1 (M+H), 337.1 (M+NH4). XH NMR (300 MHz, DMSO-d6) ? 7.44 (d, J= 8.8 Hz, 2H), 7.34 (s, 1H), 7.31 (d, J= 8.8 Hz, 2H), 6.90 (s, 1H), 3.05 (s, 3H), 3.02 – 2.93 (m, 5H), 2.41 (d, J= 13.4 Hz, 2H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 22094-18-4, its application will become more common.

Reference:
Patent; ABBVIE INC.; BAYBURT, Erol K.; CLAPHAM, Bruce; COX, Phil B.; DAANEN, Jerome F.; GOMTSYAN, Arthur; KORT, Michael E.; KYM, Philip R.; VOIGHT, Eric A.; SCHMIDT, Robert G.; DART, Michael J.; GFESSER, Gregory; WO2013/62964; (2013); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 22094-18-4, These common heterocyclic compound, 22094-18-4, name is 1,3-Dibromo-2,2-dimethoxypropane, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

1 -(3 ,4-dichlorophenyl)-3 ,3 -dimethoxycyclobutanecarboxamide[1 182] 3,4-Dichlorophenylacetonitrile (9.30 g, 50 mmol), l,3-dibromo-2,2- dimethoxypropane (13.10 g, 50 mmol), and sodium tert-butoxide (10.57 g, 110 mmol) in DMSO (100 mL) and water (5 mL) were heated at 125C for 1 hour, then stirred at ambient temperature for 20 hours. The reaction mixture was diluted with water and extracted three times with diethyl ether. The organic layers were combined, washed with brine, dried with MgS04, filtered, and concentrated. The crude product was triturated with 1 : 1 diethyl ether / hexanes, and the solid collected by filtration was Example 82A (7.16 g, 23.54 mmol, 47.1% yield). XH NMR (300 MHz, DMSO-d6) ? 7.61 – 7.55 (m, 2H), 7.37 (s, 1H), 7.29 (dd, J= 8.4, 2.2 Hz, 1H), 6.95 (s, 1H), 3.05 (s, 3H), 2.99 (s, 3H), 2.97 – 2.89 (m, 2H), 2.46 – 2.37 (m, 2H).

The synthetic route of 22094-18-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ABBVIE INC.; BAYBURT, Erol K.; CLAPHAM, Bruce; COX, Phil B.; DAANEN, Jerome F.; GOMTSYAN, Arthur; KORT, Michael E.; KYM, Philip R.; VOIGHT, Eric A.; SCHMIDT, Robert G.; DART, Michael J.; GFESSER, Gregory; WO2013/62964; (2013); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 22094-18-4, name is 1,3-Dibromo-2,2-dimethoxypropane, This compound has unique chemical properties. The synthetic route is as follows., 22094-18-4

To a solution of 2-(2,5-difluoro-4-methylphenyl)acetonitrile (16.7 g, 100 mmol) in DMSO (200 mL) was added NaH (8 g, 200 mmol, 60% oil dispersion), portion-wise, at RT. The reaction was stirred for 1 h at RT, and then l,3-dibromo-2,2-dimethoxypropane (39.3 g, 150 mmol) was added. The mixture was heated at 60 C for 6 h. The reaction was quenched with water (100 mL) at 0 C and extracted with EtOAc (2 x 100 mL). The organic extracts were combined and washed with brine (2 x 50 mL), dried over Na2S04, filtered, and concentrated under reduced pressure. The residue was purified by silica gel chromatography using petroleumn ether/EtOAc (4/1) as eluting solvents to afford the title compound as a yellow solid (12 g, 45% yield). lU NMR(400 MHz, DMSO- ) delta 7.36-7.28(m, 2H), 3.18(s, 3H), 3.05(s, 3H), 3.03 (d, / = 13.6 Hz, 2H), 2.77 (d, / = 13.6 Hz, 2H), 2.24 (d, / = 1.6 Hz, 3H). LCMS (ESI): m/z = 268.0 [M+H]+.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; GENENTECH, INC.; FAUBER, Benjamin; GANCIA, Emanuela; LADDUWAHETTY, Tammy; VESEY, David; WINSHIP, Paul; RENE, Olivier; (168 pag.)WO2017/5900; (2017); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

22094-18-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 22094-18-4, name is 1,3-Dibromo-2,2-dimethoxypropane belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

To a suspension of NaH (4.08 g, 102 mmol) (60% in oil) in DMF (50 mL) was added a solution of 2-(4-bromophenyl)acetonitrile (10 g, 51 mmol) in DMF (50 mL) dropwise at 0 C, followed by the addition of 1,3 -dibromo-2,2-dimethoxy propane (13.4 g, 51.0 mmol) at 0 C. The mixture was stirred at 60 C for 18 h. After cooling to RT, the reaction was quenched by adding water (250 mL) and extracted with EtOAc (150 mLx3). The organic layers were combined, washed with brine, dried over Na2SC>4, filtered and concentrated in vacuo to afford a residue, which was purified by column chromatography on silica gel (PE : ethyl acetate =40: 1 to 30: 1) to give the title compound. MS (EI) m/z 296 [M+H]+.

The synthetic route of 22094-18-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; ZHOU, Hua; ACHAB, Abdelghani; FRADERA, Xavier; HAN, Yongxin; LI, Derun; MCGOWAN, Meredeth, A.; SCIAMMETTA, Nunzio; SLOMAN, David, L.; YU, Wensheng; (98 pag.)WO2019/27855; (2019); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem