Category: 53087-13-1

Related Products of 53087-13-1, A common heterocyclic compound, 53087-13-1, name is 1-(Benzyloxy)-3-bromobenzene, molecular formula is C13H11BrO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step-2: Synthesis of l-(benzyloxy)-3-(but-l-yn-l-yl)benzene sealed tubc/90 C/12 h To a stirred solution of l-(benzyloxy)-3-bromobenzene (2.5 g, 9.54 mmol) in 30 mL of MeOH:DMA:H20 (1: 1: 1) in a sealed tube, were added copper iodide (0.181 g, 0.95 mmol) and cesium carbonate (4.3 g, 13.3 mmol) at room temperature. This mixture was degassed with three vacuum/N2 cycles, and were added but-l-yn-l-yltrimethylsilane (2.4 g, 19 mmol, Example- 16, Step-2) followed by Pd(PPh3)2Cl2 (0.334 g, 0.479 mmol). The pressure tube was sealed and heated at 90 C for 12 h. Upon completion by TLC, the reaction mixture was diluted with water (250 mL) and extracted with EtOAc (2 x 100 mL). The combined organic extracts were washed with water, brine, dried over anhydrous sodium sulphate and concentrated under reduced pressure. The crude product was purified by column chromatography using 1% EtOAc in n-hexane to afford l-(benzyloxy)-3-(but-l-yn-l- yl)benzene (1.6 g, 72%).

The synthetic route of 53087-13-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; EISAI R&D MANAGEMENT CO., LTD.; HAO, Ming-Hong; KORPAL, Manav; NYAVANANDI, Vijay Kumar; PUYANG, Xiaoling; SAMAJDAR, Susanta; SMITH, Peter Gerard; WANG, John; ZHENG, Guo Zhu; ZHU, Ping; (161 pag.)WO2016/196342; (2016); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 53087-13-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 53087-13-1, name is 1-(Benzyloxy)-3-bromobenzene belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

A degassed mixture of 3-benzyloxy-phenyl bromide (28) (0.2 g, 0.76 mmol), 3- cyanophenylboronic acid (0.223 g, 1.52 mmol), barium hydroxide (0.285 g, 1.67 mmol), Pd(PPh3)4 (0.088 g, 0.076 mmol), DME (5 mL) and H2O (3 niL) was heated (80C) for 6 hours with vigorous stirring under an argon atmosphere. The reaction mixture was cooled to RT, diluted with ethyl acetate, and filtered through a plug of celite. The filtrate was diluted with brine; the organic phase was separated, dried (MgSO4), and concentrated in vacuo. The residue obtained was purified by flash column chromatography (20% diethyl ether-hexane) to give 75 (0.130 g, 60% yield) as a viscous liquid.[0411] 75 was confirmed as follows: 1H NMR (500 MHz, CDCl3) delta 7.85 (t, J = 2.5 Hz, 1H), 7.78 (dt, J = 7.5 Hz, J = 1.5 Hz, 1H), 7.63 (dt, J = 8.0 Hz, J = 1.5 Hz, 1H), 7.53 (t, J = 8.0 Hz, 1H), 7.46 (d, J = 7.5 Hz, 2H), 7.44-7.37 (m, 3H), 7.35 (t, J = 7.0 Hz, 1H), 7.18-7.14 (m, 2H), 7.02 (dd, J = 8.5 Hz, J = 2.5 Hz, 1H), 5.17 (s, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-(Benzyloxy)-3-bromobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; NORTHEASTERN UNIVERSITY; WO2009/52319; (2009); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 53087-13-1, The chemical industry reduces the impact on the environment during synthesis 53087-13-1, name is 1-(Benzyloxy)-3-bromobenzene, I believe this compound will play a more active role in future production and life.

The (2S,4R)-4-(3-hydroxyphenyl)-4-methoxy-2-methyltetrahydropyran, used as a starting material, was obtained as follows: A Grignard reagent was prepared by heating a mixture of 3-benzyloxybromobenzene (4.2 g), magnesium (0.4 g), and tetrahydrofuran (10 ml) to reflux for 30 minutes. The mixture was allowed to cool to approximately 40 C. and a solution of (2S)-2-methyltetrahydropyran-4-one (1.55 g) in tetrahydrofuran (7 ml) was added dropwise. The mixture was stirred and warmed to 40 C. for 3 hours. The mixture was partitioned between ethyl acetate and cold dilute aqueous hydrochloric acid solution. The organic phase was washed with a saturated aqueous sodium chloride solution, dried (MgSO4) and evaporated. The residue was purified by column chromatography using a 10:3 v/v mixture of toluene and ethyl acetate as eluent. There was thus obtained, as a mixture of diastereoisomers, (2S,4R)- and (2S,4S)-4-(3-benzyloxyphenyl)-4-hydroxy-2-methyltetrahydropyran (3.71 g, 92%), as an oil, which was partly separated to give a fraction (2.33 g) which was enriched in the less polar diastereoisomer. Sodium hydride (55% w/w dispersion in mineral oil, 0.39 g) was added to a solution of the enriched fraction so obtained (2.33 g) in dimethylformamide (16 ml) which had been cooled to -5 C. and the mixture was stirred at this temperature for 1 hour. Methyl iodide (0.61 ml) was added and the mixture was stirred for 2 hours and allowed to warm to ambient temperature. The mixture was partitioned between ethyl acetate and ice-cold water. The organic phase was washed with a saturated aqueous sodium chloride solution, dried (MgSO4) and evaporated. The residue was purified by column chromatography using a 20:1 v/v mixture of toluene and ethyl acetate as eluent. There was thus obtained (2S,4R)-4-(3-benzyloxyphenyl)-4-methoxy-2-methyltetrahydropyran (1.99 g, 82%), as an oil. NMR Spectrum: (CDCl3, delta values) 1.2(d, 3H), 1.5-1.65(m, 1H), 1.9-2.05(m, 3H), 2.96(s, 3H), 3.8-4.0(m, 3H), 5.1(s, 2H), 6.85-7.05(m, 3H), 7.2-7.5(m, 6H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-(Benzyloxy)-3-bromobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Imperial Chemical Industries PLC; ICI Pharma; US5134148; (1992); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 53087-13-1 as follows. HPLC of Formula: C13H11BrO

1.85 g of magnesium was suspended in 15 ML of diethyl ether, to which a catalytic amount of iodine was added and then a solution of 20.00 g of 1-(benzyloxy)-3-bromobenzene in 40 ML of diethyl ether was added dropwise and this mixture was stirred for 8 hours while heating it under reflux.. The reaction mixture was cooled to 5C, to which a solution of 6.72 ML of cyclopentanone in 20 ML of diethyl ether was added dropwise, and this mixture was stirred for one hour at room temperature.. Then an aqueous solution of ammonia chloride was added to the ice-cooled reaction mixture, and the organic phase was separated therefrom.. After the resultant organic phase was washed with water and a saturated sodium chloride solution successively, the washed phase was dried over anhydrous magnesium sulfate, and the solvent was distilled out under reduced pressure.. The resultant residue was purified by silica gel column chromatography [eluent; hexane:ethyl acetate=10:1] to yield 7.65 g of 1-[3-(benzyloxy)phenyl] cyclopentanol as yellow oil. NMR(400MHz,CDCl3) delta value: 1.52(1H,s), 1.79-1.88(2H,m), 1.93-2.04(6H,m), 5.08(2H,s), 6.85(1H,ddd,J=8.4,2.8,1.2Hz), 7.08(1H,ddd,J=7.6,1.6,0.8Hz), 7.16-7.17(1H,m), 7.24-7.46(6H,m)

According to the analysis of related databases, 53087-13-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; TOYAMA CHEMICAL CO., LTD.; Hirono, Shuichi; Shiozawa, Shunichi; EP1445249; (2004); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

These common heterocyclic compound, 53087-13-1, name is 1-(Benzyloxy)-3-bromobenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 53087-13-1

3′-Benzyloxy-biphenyl-3-carboxylic acid methyl ester (29) A degassed mixture of 3-benzyloxy-phenyl bromide (28) (0.176 g, 0.67 mmol), 3-methoxycarbonylphenylboronic acid (0.18 g, 1 mmol), barium hydroxide (0.25 g, 1.47 mmol), Pd(PPh3)4 (0.077 g, 0.067 mmol), DME (5 mL) and H2O (3 mL) was microwaved with vigorous stirring using a CEM-discover system (ram time: 2 min, hold time: 5 min, temperature: 120 C., pressure: 200 psi, power: 250 W). The crude reaction mixture filtered through a plug of celite and concentrated in vacuo. The residue obtained was purified by flash column chromatography (25% diethyl ether-hexane) to give the title compound (29) (0.118 g, 60% yield) as a viscous liquid. 1H NMR (500 MHz, CDCl3) delta 8.27 (t, J=1.5 Hz, 1H), 8.20 (dd, J=8.0 Hz, J=1.5 Hz, 1H), 7.76 (dd, J=8.0 Hz, J=2.0 Hz, 1H), 7.50 (t, J=8.0 Hz, 1H), 7.47 (d, J=7.5 Hz, 2H), 7.42-7.32 (m, 4H), 7.25-7.22 (m, 2H), 7.00 (dd, J=8.2 Hz, J=2.0 Hz, 1H), 5.13 (s, 2H), 3.95 (s, 3H).

The synthetic route of 1-(Benzyloxy)-3-bromobenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Bahr, Ben A.; Makriyannis, Alexandros; Karanian, David A.; US2010/234379; (2010); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 53087-13-1, The chemical industry reduces the impact on the environment during synthesis 53087-13-1, name is 1-(Benzyloxy)-3-bromobenzene, I believe this compound will play a more active role in future production and life.

Step 1 : Preparation of tert- utyl 4-(3-Benzyloxyphenyl)-4-hydroxypiperidine-l- carboxylate. A suspension of magnesium metal (0.144g, 6.0 mmol) in THF (10 mL) was rapidly stirred for 30 minutes under nitrogen then a solution of 3-benzyloxybromobenzene (1.58g, 6.00 mmol) in THF (10 mL) added slowly via dropping funnel. Once approximately 1 mL of the bromide solution had been added a crystal of iodine was added to the reaction and the mixture gently heated until Grignard formation began. The remaining bromide solution was then added at a rate to maintain a reaction temperature range of 50-60 C. Once addition was complete the reaction was heated to gentle reflux for 1 hour then cooled in an ice bath. A solution of tert- utyl 4-oxopiperidine-l-carboxylate (l .OOg, 5.02 mmol) in THF (10 mL) was the added to the reaction over a period of 30 minutes then the mixture was allowed to warm to room temperature with stirring over a 2 hour period. After this time the reaction was quenched by the addition of 25% ammonium chloride solution (50 mL) and the layers separated. The aqueous was extracted with ethyl acetate (2 x 10 mL) and the combined organics were washed with water (20 mL) and brine (20 mL) then dried over magnesium sulfate. Subsequent filtration, concentration and purification of the residue by column chromatography (Si02, 0-25% ethyl acetate /heptanes) afforded a 61 % yield of tert- butyl 4-(3-benzyloxyphenyl)-4-hydroxypiperidine-l-carboxylate as a viscous clear oil that became a white solid on standing.1H NMR (CDC13): delta = 7.41-7.33 (m, 5H), 7.29 (d, J = 7.3 Hz, 1H), 7.15 (t, J = 1.9 Hz, 1H), 7.06 (d, J = 7.8 Hz, 1H), 6.91 (dd, J = 8.0, 2.1Hz, 1H), 5.09 (s, 2H), 4.03 (m, 2H), 3.25 (bt, J = 12Hz, 2H), 2.00 (bt, J = 11.1Hz, 2H), 1.73 (bd, J= 12.6Hz, 2H) and 1.50 ppm (s, 9H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-(Benzyloxy)-3-bromobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; KINENTIA BIOSCIENCES LLC; FAIRFAX, David J.; WO2011/137331; (2011); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem