Ethers-buliding-blocks

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2398-37-0, name is 1-Bromo-3-methoxybenzene, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 1-Bromo-3-methoxybenzene

Acetyl chloride (3.56 mL, 0.06 mol) is added dropwise to a stirred suspension of 3-bromoanisole (9.35 g, 0.05 mol) and AlCl3 (8.00 g, 0.06 mol) in dichloromethane (50 mL) at 0 C under argon. The resulting mixture is stirred at 0 0C for 40 min and then at room temperature for 1 h, and diluted with H2O (100 mL) and 2 N HCl (35 mL), and extracted with ethyl acetate (2 x 100 mL and 50 mL). The extract is washed (brine) and dried. After solvent removal at reduced pressure, the residue is purified on silica gel (12.5% to 14.3% ethyl acetate/hexane) to give 9.55 g (83%) of 2 as a colorless liquid. IR 2964, 1688, 1596, 1252 cm”1; 1H NMR (CDCI3) delta 2.66 (s, 3H, CH3CO), 3.88 (s, 3H, CH3O), 6.91 (dd, J= 8.4 Hz, 2.4 Hz, IH, 5-PhH), 7.19 (d, J= 2.4 Hz, IH, 3- PhH), 7.63 ppm (d, J= 8.4 Hz, IH, 6-PhH).

According to the analysis of related databases, 2398-37-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BURNHAM INSTITUTE FOR MEDICAL RESEARCH; MERCOLA, Mark; DAWSON, Marcia, I.; CASHMAN, John; WO2010/33643; (2010); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 41864-45-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 41864-45-3, name is 4,5-Dimethoxy-2-methylaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

The compound 66 (830 mg, 2.75 mmol) was dissolved in acetic acid (6.64 mL). 4,5-dimethoxy-2-methylaniline (2.30 g, 13.7 mmol) was added to the solution. The mixture was stirred at 100C for 3 hours. Water was added to the reaction mixture. The mixture was extracted with ethyl acetate. The organic layer was washed by brine, and dried over sodium sulfate. The solvent was evaporated under reduced pressure. The obtained residue was solidified with ethyl acetate to give the compound I-1281 (450 mg, yield 40%). 1H-NMR (DMSO-D6) delta: 1.90 (s, 3H), 3.70 (s, 3H), 3.75 (s, 3H), 5.33 (s, 2H), 6.75 (s, 1H), 6.83 (s, 1H), 7.33 (dd, J = 8.0 Hz, 2H), 7.40 (s, 1H), 8.83 (s, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4,5-Dimethoxy-2-methylaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Shionogi & Co., Ltd; TANAKA, Satoru; OGAWA, Tomoyuki; KAI, Hiroyuki; OGATA, Yuki; HIRAI, Keiichiro; KUROSE, Noriyuki; FUJII, Yasuhiko; (438 pag.)EP3287443; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 51388-20-6, name is 4-(Benzyloxy)aniline hydrochloride, A new synthetic method of this compound is introduced below., Application In Synthesis of 4-(Benzyloxy)aniline hydrochloride

A solution of 4-benzyloxyaniline hydrochloride (4.0 g, 17.0 mmol), methanesulfonylacetic acid (2.35 g, 17.0 mmol) and HBTU (6.89 g, 18.2 mmol) in DMF (70 mL) was stirred at ambient temperature one minute. DIEA (6.5 mL, 37.2 mmol) was added all at once, and the resultant solution was stirred at ambient temperature. The solution was poured into water, and the product crystallized. The product, 5.4 g (99%), was collected by filtration and was used without any further purification in the subsequent reaction. MS m/z 320 (MH+). 1H NMR(DMSO-d6) delta 3.17 (s, 3H), 4.25 (s, 2H), 5.07 (s, 2H), 7.00 (d, 2H), 7.32-7.55 (m, 7H) and 10.32 (s, 1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Carson, John R.; McNally, James J.; US2005/182108; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

588-96-5, name is p-Bromophenetole, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Quality Control of p-Bromophenetole

Preparation Example 3 Synthesis of 1-bromo-3-(4-ethoxybenzyl)benzene; A 2.6 M n-butylithium hexane solution (5.8 mL) was added to a mixture of 4-bromophenetole (2.87 g, 0.0143 mol) and tetrahydrofuran (30 mL) at -78C. After the mixture was stirred for 0.5 hours, a tetrahydrofuran (15 mL) solution of 3-bromobenzaldehyde (2.65 g, 0.0143 mol) was added, and further stirred for 15 minutes to warm the reaction mixture to room temperature. After the reaction mixture was added with a saturated ammonium chloride aqueous solution and extracted with ethyl acetate, the organic layer was washed with brine and dried with anhydrous magnesium sulfate. After the desiccant was filtered off, the residue obtained by evaporating the solvent under reduced pressure was purified by silica gel column chromatography (hexane:ethyl acetate=7:1 to 5:1) to obtain colorless oily (3-bromophenyl)(4-ethoxyphenyl)methanol (3.94 g, 90%). Then, Et3SiH (4.09 mL, 0.0256 mol) and BF3·Et2O (1.47 mL, 0.0116 mol) were added sequentially to a chloroform (22 mL) solution of (3-bromophenyl)(4-ethoxyphenyl)methanol (3.92 g, 0.0128 mol) at -60C. After stirred for one hour, the reaction solution was warmed to room temperature. After the reaction mixture was added with a saturated sodium carbonate aqueous solution and extracted with chloroform, the organic layer was washed with brine and dried with anhydrous magnesium sulfate. After the desiccant was filtered off, the residue obtained by evaporating the solvent under reduced pressure was purified by silica gel column chromatography (hexane:ethyl acetate=50:1) to obtain a colorless oily title compound (2.84 g, 76%). 1H NMR (300 MHz, CHLOROFORM-d) delta ppm 1.40 (t, J=7.0 Hz, 3 H) 3.88 (s, 2 H) 4.01 (q, J=7.0 Hz, 2 H) 6.83 (d, J=8.9 Hz, 2 H) 7.07 (d, J=8.9 Hz, 2 H) 7.09 – 7.18 (m, 2 H) 7.29 – 7.34 (m, 2 H).

The synthetic route of 588-96-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TAISHO PHARMACEUTICAL CO., LTD; EP1845095; (2007); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 33311-29-4, name is 4-(2-Methoxyethoxy)aniline, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C9H13NO2

c) 2-[1-(4-fluorophenyl)-3-[2-(4-methoxyphenyl)ethyl]-5-oxo-2-sulfanylidene imidazolidin-4-yl]-N-[4-(2-methoxyethoxy)phenyl]acetamide (example 53) [0196] HOBt (84 mg; 0.55 mmol; 1.5 eq), DIPEA (323 muL; 1.85 mmol; 5 eq) and 4-(2-methoxyethoxy)aniline (81 mg; 0.48 mmol; 1.3 eq) were added to a solution of 2-[1-(4-fluorophenyl)-3-[2-(4-methoxyphenyl)ethyl]-5-oxo-2-sulfanylideneimidazolidin-4-yl]acetic acid (1-21) (150 mg; 0.37 mmol; 1 eq) in dimethylformamide (5 mL). The reaction mixture was stirred at room temperature for 2 days. Ethyl acetate (10 mL) and water (5 mL) were added and the layers were separated. The organic layer was washed with saturated ammonium chloride (10 mL), water (10 mL) and sodium chloride (2 x 15 mL), dried over sodium sulfate, filtered and concentrated to dryness. The crude was triturated in ethyl acetate, washed with petroleum ether, and concentrated to dryness. The residue was taken up in ethyl acetate/cyclohexane (200 muL) until precipitation, filtration. The title compound, 2-[1-(4-fluorophenyl)-3-[2-(4-methoxyphenyl)ethyl]-5-oxo-2-sulfanylideneimidazolidin-4-yl]-N-[4-(2-methoxyethoxy)phenyl]acetamide, was obtained in 25 % yield (50 mg) as a yellow solid. 1H-NMR (Acetone-d6): delta (ppm) 2.85 (m, 1H), 3.17 (m, 2H), 3.36 (s, 3H), 3.40 (m, 1H), 3.65 (m, 2H), 3.68 (s, 3H), 3.70 (m, 1H), 4.09 (m, 2H), 4.31 (m, 1H), 4.63 (m, 1H), 6.87 (m, 4H), 7.25 (m, 4H), 7.49 (m, 4H), 9.34 (s, 1H); MS (ESI+): m/z = 551.9 [M+H]+.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 33311-29-4.

Reference:
Patent; Vivalis; Guedat, Philippe; Berecibar, Amaya; Ciapetti, Paola; Venkata Pithani ,Subhash; Trouche, Nathalie; EP2664616; (2013); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 6358-77-6, These common heterocyclic compound, 6358-77-6, name is 5-Bromo-2-methoxyaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of sodium bicarbonate (3.74 g, 44.5 mmol) in water (75 mL) was added to commercially available 5-bromo-2-methoxy-phenylamine (3 g, 14.8 mmol) in chloroform (75 mL). Thiophosgene (1.42 mL, 18.6 mmol) was then added. The biphasic solution was stirred at room temperature for 1 h. The phases were separated and the aqueous phase was extracted with CH2Cl2. The organic phase was dried (Na2SO4), filtered, and concentrated, yielding the crude title compound as an off-white solid.

The synthetic route of 6358-77-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; WANG, Aihua; Zhang, Yan; Leonard, Kristi Anne; Hawkins, Michael; Tounge, Brett Andrew; Maharoof, Umar S.M.; Barbay, Joseph Kent; US2012/129811; (2012); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 873980-68-8, name is 4-Bromo-2-methoxy-5-methylaniline, A new synthetic method of this compound is introduced below., Computed Properties of C8H10BrNO

Preparation 40: 2-methoxy-5-methyl-4-(1 -methyl-1 A7-pyrazol-4-yl)aniline To a solution of 4-bromo-2-methoxy-5-methylaniline (Preparation 39, 350 mg, 1 .620 mmol) in EtOH (2.5 mL), toluene (2.5 mL) and water (2.5 mL) was added 1 -methylpyrazole-4- boronic acid pinacol ester (404 mg, 1 .944 mmol), sodium carbonate (343 mg, 3.24 mmol) and Pd(PPh3)4 (225 mg, 0.194 mmol). The reaction mixture was heated to 80C for 2.5 hours, under nitrogen. The reaction mixture was cooled to room temperature and diluted with EtOAc (30 mL), washed with water (30 mL) and brine (30 mL), dried (MgS04) and concentrated in vacuo. The residue was purified by silica gel column chromatography eluting with 0-5% MeOH in DCM to give the title compound (140 mg, 36%). 1 H NMR (500 MHz, CDCI3): delta 7.56 (d, J = 0.5 Hz, 1 H), 7.39 (s, 1 H), 6.75 (s, 1 H), 6.63 (s, 1 H), 3.96 (s, 3H), 3.86 (s, 3H), 3.76 (br s, 2H), 2.27 (s, 3H). LCMS (ESI) Rt = 1 .13 minutes MS m/z 218.30 [M+H]+

The synthetic route of 873980-68-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; HOELDER, Swen; BLAGG, Julian; SOLANKI, Savade; WOODWARD, Hannah; NAUD, Sebastian; BAVETSIAS, Vassilios; SHELDRAKE, Peter; INNOCENTI, Paolo; CHEUNG, Jack; ATRASH, Butrus; WO2014/37750; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 123652-95-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 123652-95-9, name is (3-Fluoro-4-methoxyphenyl)methanamine belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

1. Model canadense amide quinones (DCA – CONH – 07) preparation, comprising the following steps:

The synthetic route of (3-Fluoro-4-methoxyphenyl)methanamine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Guangdong University of Technology; Zhao Suqing; Zhang Bingjie; Feng Dongyan; Fang Yinglin; Wu Ke; Ling Huaying; Tan Qiting; Chen Yanting; Yang Yang; Zhao Jiawei; Ma Zhuolin; Hong Weiqian; (24 pag.)CN109651183; (2019); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 162705-07-9 as follows. Product Details of 162705-07-9

General procedure: The corresponding N-(1-oxyl-2,2,6,6-tetramethyl-4-piperidinyl-oxycarbonyl) amino acids 20a-h (0.47 mmol) were dissolved in 50 mL of anhydrous CH2Cl2 and cooled to 0 C. 1-Hydroxybenzotriazole (HOBt) (0.7 mmol) and EDCI (0.56 mmol) were added, and the mixture was stirred for 30 min at 0 C. Subsequently, 0.39 mmol of compound 3 and finally 2.4 mL of N-ethyl diisopropylamine were added. The mixture was stirred for 16 h at ambient temperature. The solvent was removed under reduced pressure and the residue was purified by flask-column chromatography (gradient elution with mixtures of chloroform/methanol) on silica gel as monitored by TLC. Synthesized target compounds 21a-h were characterized by mp, IR, ESR and HRMS analyses.

According to the analysis of related databases, 162705-07-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Liu, Ying-Qian; Li, Xiao-Jing; Zhao, Chun-Yan; Nan, Xiang; Tian, Jing; Morris-Natschke, Susan L.; Zhang, Zhi-Jun; Yang, Xiao-Ming; Yang, Liu; Li, Lin-Hai; Zhou, Xing-Wen; Lee, Kuo-Hsiung; Bioorganic and Medicinal Chemistry; vol. 21; 5; (2013); p. 1248 – 1256;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 588-63-6,Some common heterocyclic compound, 588-63-6, name is (3-Bromopropoxy)benzene, molecular formula is C9H11BrO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 3,5-dimethyl-1-(3-phenoxypropyl)-1H-pyrazole (L1): A solution of 3,5-dimethyl-1H-pyrazole (0.30 g, 3.2 mmol) in DMF/THF (v/v = 1:1, 12 mL) was added to a suspension of NaH (0.15 g, 6.4 mmol) in DMF/THF (v/v = 2:1, 15 mL) and stirred at 60 °C for 2 h. Then, the resulting solution was added under stirring to a solution of 3-bromopropyl phenyl ether (0.70 g, 3.2 mmol) in DMF (7 mL). The mixture was allowed to stir for 24 h at 60 °C, cooled, and treated cautiously with H2O (5 mL) to decompose excess NaH. The solvents were then evaporated under reduced pressure. The residue was extracted with ethyl acetate (3 * 15 mL), washed with H2O (2 * 15 mL). The organic phase was dried over MgSO4 and filtered, before the solvent was evaporated under reduced pressure. After workup and purification by chromatographic column on silica gel (hexane/ethyl acetate, 90:10), L1 was obtained as a colorless oil (0.47 g, 64percent).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route (3-Bromopropoxy)benzene, its application will become more common.

Reference:
Article; Ulbrich, Ana H.D.P.S.; Campedelli, Roberta R.; Milani, Jorge L. Sonego; Santos, Joao H.Z. Dos; Casagrande, Osvaldo De L.; Applied Catalysis A: General; vol. 453; (2013); p. 280 – 286;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem