Tag: M.W=100-200

Related Products of 24332-20-5, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 24332-20-5 name is 1,1,2-Trimethoxyethane, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To a solution of methoxyacetaldehyde dimethylacetal (5 g, 41.63 mmol) in methanol (20 ml) was added a solution of hydroxylamine hydrochloride (2.9 g, 41.73 mmol) in water (10 ml). The reaction was stirred at room temperature for 18 hours. To the reaction was then added an aqueous solution of sodium hydroxide (1.67 g, 41.6 mmol in 10 ml water) and stirred for 3 hours at room temperature. The methanol was removed in vacuo and the mixture acidified with concentrated hydrochloric acid to pH 5-6, before extracting with f-butylmethyl ether, drying over Na2SO4 and concentrating in vacuo to afford the title compound as a 1.5:1 mixture of E/Z isomers (2.64 g, 71% yield).1HNMR (CDCI3): 3.4 (m, 3H), 4.05 (d, 1.2H), 4.3 (d, 0.8H), 6.9 (t, 0.4H), 7.5 (t, 0.6H), 8.55 (br s, 0.6H), 8.85 (br s, 0.4H)

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1,1,2-Trimethoxyethane, and friends who are interested can also refer to it.

Reference:
Patent; PFIZER LIMITED; WO2008/135826; (2008); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Some common heterocyclic compound, 450-91-9, name is 4-Fluoro-2-methoxyaniline, molecular formula is C7H8FNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C7H8FNO

Compound a1-2 (8.0 g, 43 mmol) was placed in a 500 mL single-necked reaction flask and concentrated sulfuricacid (100 mL) was added under stirring at a constant rate to dissolve the substrate. Concentrated nitric acid (6.15 mL,48 mmol) was slowly added dropwise to the stirred reaction flask at -20 C and stirred at that temperature for 5 minutes.The progress of the reaction was checked by TLC. After the reaction of the substrate was complete, the reaction mixturewas poured into iced water. In -20 C ice bath, the aqueous solution of hydroxide/water (150 mL/300 mL) was slowly added to the reaction system and pH was adjusted to 8-9. After neutralization, the reaction solution was extracted threetimes with ethyl acetate/water system. The organic layer was separated, washed with water and then saturated brine,dried over anhydrous sodium sulfate and concentrated under reduced pressure to give the compound 4-fluoro-2-methoxy-5-nitroaniline a1 (8.7 g) which was directly used in the next step. Yield: 80%; purity: 100%; MS m/z(ESI): 187.0 [M+H]+;1HNMR (400 MHz, DMSO-d6): delta 7.34 (d, J = 7.8 Hz, 1H), 7.04 (d, J = 13.4 Hz, 1H), 5.25 (brs, 2H), 3.90 (s, 3H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 450-91-9, its application will become more common.

Reference:
Patent; Shanghai Haiyan Pharmaceutical Technology Co., Ltd.; Yangtze River Pharmaceutical Group Co., Ltd.; LAN, Jiong; JIN, Yunzhou; ZHOU, Fusheng; LEI, Jing; WEN, Chong; ZHANG, Zhiyuan; HE, Xiangyu; (57 pag.)EP3173412; (2017); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

These common heterocyclic compound, 2398-37-0, name is 1-Bromo-3-methoxybenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C7H7BrO

The advantageous effect of adding zinc chloride to an amination reaction was demonstrated in the amination reaction of 3-bromoanisole. the results of which are summarized in Table 10. When 3-bromoanisole was reacted under the standard lithium amide amination conditions, using lithium amide (10 eq.) in the presence of (CyPF-^-Bu)PdCl2 (1 mol%) in DME gave a complicated mixture of products was obtained (Table 10, Entry 1). When conducted in the presence of zinc chloride and TMEDA, however, the reaction could successfully gave the desired monoarylation product, 3-methoxyaniline, although at high concentrationsN,N-dimethyl-3-methoxyaniline was formed in a significant amount as a by- product (Table 10, Entries 3 and 4). Under optimized conditions (Table 10, Entries 8 and 9), 3-methoxyaniline was formed selectively in good yield.

The synthetic route of 1-Bromo-3-methoxybenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; YALE UNIVERSITY; WO2007/109365; (2007); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 16452-01-0, A common heterocyclic compound, 16452-01-0, name is 3-Methoxy-4-methylaniline, molecular formula is C8H11NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Reference Production Example 79 (1473) A mixture of 6.85 g of 3-methoxy-4-methylaniline and 150 mL of chloroform was cooled to 0 C. and 26.5 g of tetrabutylammonium tribromide was added, followed by stirring at the same temperature for 20 minutes. To the reaction mixture, chloroform was added. The organic layer was washed with a sodium bicarbonate solution, an aqueous sodium sulfite solution, water, and a saturated saline solution, dried over anhydrous sodium sulfate, and then concentrated under reduced pressure. (1474) The residue thus obtained was subjected to silica gel column chromatography to obtain 7.85 g of 2-bromo-5-methoxy-3-methylalanine. (1475) 1H-NMR (CDCl3) delta: 2.08 (3H, s), 3.76 (3H, s), 3.93 (2H, br s), 6.28 (1H, s), 7.12 (1H, s).

The synthetic route of 16452-01-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SUMITOMO CHEMICAL COMPANY, LIMITED; AZUMA, Shuhei; ARIMORI, Sadayuki; MAEHATA, Nao; (235 pag.)US2016/150787; (2016); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 2930-05-4, The chemical industry reduces the impact on the environment during synthesis 2930-05-4, name is 2-((Benzyloxy)methyl)oxirane, I believe this compound will play a more active role in future production and life.

General procedure: To a 4 mL of vial was charged with [Bmim]Br (43.8 mg, 0.2 mmol), NaHCO3 (8.4 mg, 0.1 mmol), LiCl (4.2 mg, 0.1 mmol), epoxide (2 mmol) and CS2 (364 mL, 6 mmol). The reaction mixture was stirred at 40 C for 24 h, after which time, water (5 mL) was added into the reaction mixture. The organic layer was extracted with CH2Cl2 (3 x 5 mL). The combined organic phase was dried over anhydrous Na2SO4 and concentrated under reduced pressure. The residue was purified by flash column chromatography on silica gel (petroleum ether/ethyl acetate = 4:1 as eluent).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-((Benzyloxy)methyl)oxirane, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Mei, Congmin; Li, Xu; Liu, Lihuai; Cao, Changsheng; Pang, Guangsheng; Shi, Yanhui; Tetrahedron; vol. 73; 38; (2017); p. 5706 – 5714;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 2393-23-9, name is 4-Methoxybenzylamine, A new synthetic method of this compound is introduced below., Safety of 4-Methoxybenzylamine

3. Bis (4-methoxybenzyl) amine Reflux a solution of 4-methoxybenzylamine (25 g, 182 rnmol) and 4-methoxybenzaldehyde(22 mL, 182 rnmol) in 200 mL EtOH for 3 hours. Evaporate the solvent under reduced pressure to give the intermediate imine as a pale brown oil. Immediately, dissolve the intermediate imine in dry MeOH, cool to 00C, and add NaBH4 (6.9 g, 182 mmol) in portions over 30 minutes. Remove the ice bath, stir the reaction mixture at 4O0C for 40 minutes and reflux for 2 hours. After stirring at room temperature overnight, remove the solvent under vacuum, dissolve the residual oil in CH2Cl2 (200 mL) and wash with 5% NaHCO3 (10 mL). Dry the CH2Cl2 layer (Na2SO4), filter, and concentrate to afford the title product as a yellow oil, which solidifies while standing in the refrigerator. 1H NMR (400 MHz, CDCl3) delta 7.25 (m, 4H), 6.87 (m, 4H), 3.8 (s, 6H), 3.75 (d, 4H, J=8.8 Hz), 1.54 (bs, IH).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; NEUROGEN CORPORATION; WO2006/42289; (2006); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 446-61-7, name is 2-Fluoro-6-methoxyaniline, A new synthetic method of this compound is introduced below., Safety of 2-Fluoro-6-methoxyaniline

A solution of 2-fluoro-6-methoxyaniline (1 equiv) in acetic acid (0.7 M) was cooled to 5 C. A mixture of bromine (0.9 equiv) in acetic acid (0.7 M) was slowly added. The reaction mixture was stirred for 2 h at 5 C. The resulting solid was filtered, washed with ether, and dried to give the title compound (90% yield). 1H NMR (500 MHz, DMSO-d6) delta ppm 3.84 (s, 3H) 6.79 (br. s., 2H) 6.97 (s, 1H) 7.06 (d, J=10.09 Hz, 1H). MS (ESI) m/z 219.9 [M+H]+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Signal Pharmaceutical LLC; Calabrese, Andrew Antony; Jeffy, Brandon; Robinson, Dale; Zhu, Dan; Huang, Dehua; Elsner, Jan; Boylan, John; Tehrani, Lida; Nagy, Mark A.; Moghaddam, Mehran Fallah; Raheja, Raj Kumar; Erdman, Paul; Narla, Rama K.; Harris, Roy L.; Tran, Tam Minh; Riggs, Jennifer; Ning, Yuhong; US2014/200206; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 366-99-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 366-99-4, name is 3-Fluoro-4-methoxyaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Example 4a (see general route 4, procedure H, M and K)2-(3-fluoro-4-methoxyphenyl)hydrazine; [00257] A room temperature solution of 3-fluoro-4-methoxyaniline (25.0 g, 177 mmol) in concentrated 12M aqueous hydrochloric acid solution (60 mL) was stirred for two hours, after which it was cooled to 0°C to which a solution of sodium nitrite (14.2 g, 205 mmol), in water (50 mL), was added, drop-wise over 45 minutes, with internal temperature monitoring such that the reaction temperature does not warm above 5°C. After stirring for one hour at 0°C, the reaction mixture was poured slowly into a 0°C pre-made solution of tin(II) chloride dihydrate (168 g, 744 mmol) in concentrated 12M aqueous hydrochloric acid solution (125 mL). The reaction mixture was allowed to warm up to room temperature, after which it was stored in the freezer overnight (12 hours), leading to the formation of a precipitate. This dark brown solid was successively washed with water (2 x 100 mL) and diethyl ether (3 x 100 mL), and dried to afford crude 2-(3-fluoro-4-methoxyphenyl)hydrazine hydrochloride as a pasty brown solid (note that this crude solid can also be used directly in the next step). As part of the purification and isolation process, the crude hydrazine hydrochloride salt was reconstituted in water (100 mL) and 3M aqueous sodium hydroxide solution (200 mL), extracted with diethyl ether (2 x 200 mL), washed with successively with saturated sodium bicarbonate solution (2 x 100 mL), water (2 x 20 mL) and saturated sodium chloride solution (2 x 20 mL), dried (sodium sulfate), filtered and concentrated to afford 2-(3-fluoro-4- methoxyphenyl)hydrazine as a light yellow solid (15.0 g, 96.1 mmol, 54percent yield. 1H NMR (400 MHz, CDC13) delta (ppm): 6.87 (m, 1H), 6.66 (dd, 1H), 6.49-6.53 (m, 1H), 5.06 (br. s, 1H), 3.83 (s, 3H), 3.55 (br. s, 2H).[00258] A portion of 2-(3-fluoro-4-methoxyphenyl)hydrazine (5.00 g, 32.0 mmol) was dissolved in absolute ethanol (50 mL), to which a solution hydrogen chloride (15 mL, 2.5M in ethanol) was added. The resulting precipitate was filtered, washed with ethyl acetate (2 x 40 mL), and dried to afford 2-(3-fluoro-4-methoxyphenyl)hydrazine hydrochloride as an off- white solid (4.7 g).

The synthetic route of 3-Fluoro-4-methoxyaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; IRONWOOD PHARMACEUTICALS, INC.; HUDSON, Colleen; BARDEN, Timothy, C.; JIA, James; MERMERIAN, Ara; PENG, Bo; YANG, Jane; YU, Xiang, Y.; SPROTT, Kevin; WO2012/88469; (2012); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 41864-45-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 41864-45-3, name is 4,5-Dimethoxy-2-methylaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

The compound 66 (830 mg, 2.75 mmol) was dissolved in acetic acid (6.64 mL). 4,5-dimethoxy-2-methylaniline (2.30 g, 13.7 mmol) was added to the solution. The mixture was stirred at 100C for 3 hours. Water was added to the reaction mixture. The mixture was extracted with ethyl acetate. The organic layer was washed by brine, and dried over sodium sulfate. The solvent was evaporated under reduced pressure. The obtained residue was solidified with ethyl acetate to give the compound I-1281 (450 mg, yield 40%). 1H-NMR (DMSO-D6) delta: 1.90 (s, 3H), 3.70 (s, 3H), 3.75 (s, 3H), 5.33 (s, 2H), 6.75 (s, 1H), 6.83 (s, 1H), 7.33 (dd, J = 8.0 Hz, 2H), 7.40 (s, 1H), 8.83 (s, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4,5-Dimethoxy-2-methylaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Shionogi & Co., Ltd; TANAKA, Satoru; OGAWA, Tomoyuki; KAI, Hiroyuki; OGATA, Yuki; HIRAI, Keiichiro; KUROSE, Noriyuki; FUJII, Yasuhiko; (438 pag.)EP3287443; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2398-37-0, name is 1-Bromo-3-methoxybenzene, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 2398-37-0

Acetyl chloride (3.56 mL, 0.06 mol) is added dropwise to a stirred suspension of 3-bromoanisole (9.35 g, 0.05 mol) and AlCl3 (8.00 g, 0.06 mol) in dichloromethane (50 mL) at 0 C under argon. The resulting mixture is stirred at 0 0C for 40 min and then at room temperature for 1 h, and diluted with H2O (100 mL) and 2 N HCl (35 mL), and extracted with ethyl acetate (2 x 100 mL and 50 mL). The extract is washed (brine) and dried. After solvent removal at reduced pressure, the residue is purified on silica gel (12.5% to 14.3% ethyl acetate/hexane) to give 9.55 g (83%) of 2 as a colorless liquid. IR 2964, 1688, 1596, 1252 cm”1; 1H NMR (CDCI3) delta 2.66 (s, 3H, CH3CO), 3.88 (s, 3H, CH3O), 6.91 (dd, J= 8.4 Hz, 2.4 Hz, IH, 5-PhH), 7.19 (d, J= 2.4 Hz, IH, 3- PhH), 7.63 ppm (d, J= 8.4 Hz, IH, 6-PhH).

According to the analysis of related databases, 2398-37-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; BURNHAM INSTITUTE FOR MEDICAL RESEARCH; MERCOLA, Mark; DAWSON, Marcia, I.; CASHMAN, John; WO2010/33643; (2010); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem