Tag: M.W=200-300

Reference of 20469-65-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 20469-65-2, name is 1-Bromo-3,5-dimethoxybenzene, This compound has unique chemical properties. The synthetic route is as follows.

Under a nitrogen atmosphere,2.92 g, 13.82 mmol of 1-bromo-3,5-dimethoxybenzene was dissolved in 80 ml of dry DMF,Continuous addition of 3.86g,15.20 mmol of pinacol diboron,2.10 g, 20.73 mmol KOAc,1.56 g, 1.91 mmol PdCl2 (dppf) · CH2Cl2,The mixture was stirred at 80 C for 39 hours,The resulting solution was distilled under reduced pressure to remove DMF,CH2Cl2 extraction of organic phase,Na2SO4 dehydration,After distillation under reduced pressure by column chromatography.The stationary phase was a spherical silica gel of 63 to 210 m,The EtOAc / CH3 (CH2) 4CH3 solution with a fixed phase diameter of 7.5 cm in height of 8 cm and a mobile phase of 40/60,The purified white material was purified by column chromatography with 2.18 g of 5.22 mmol of 4-bromo-2,6-bis [2- (1-methyl) benzimidazolyl] pyridine in 60 ml of anhydrous DMF,2.79 g, 28.46 mmol KOAc,0.87 g, 1.06 mmol PdCl2 (dppf) · CH2Cl2,The mixture was stirred at 80 C for 60 hours,The resulting solution was distilled under reduced pressure to remove DMF,CH2Cl2 extraction of organic phase,Dehydration of Na2SO4, distillation under reduced pressure by column chromatography,The stationary phase was a spherical silica gel of 63 to 210 m,Fixed phase diameter of 7.5cm height of 8cm,The mobile phase consisted of 60/40 EtOAc / CH3 (CH2) 4CH3 solution,The white intermediate 1 purified by column chromatography was dissolved in 50 ml of anhydrous CH2Cl2,In the ice bath slowly drip 1.0M, 15ml, 15mmol of BBr3 (dropping time 30min)After completion of the dropwise addition, the temperature was gradually raised to room temperature for 12 hours,The resulting solution was quenched by the dropwise addition of 20 ml of water in an ice-water bath,The aqueous phase was adjusted to pH to neutral and the organic phase was extracted with EtOAc.After washing with water, Na2SO4 was dehydrated, distilled under reduced pressure and washed with Hex. After filtration, the white intermediate 2 was recrystallized from DMSO / H2O and dissolved with 1.50 g of 4.45 mmol of 1- (4-bromobutyl) -pyrene 60 ml of DMF solution,1.52 g, 11.05 mmol of K2CO3 was added and stirred at 80 C for 90 h. The organic phase was extracted by distillation under reduced pressure. The organic phase was extracted with CH2Cl2 and dehydrated with Na2SO4. After distillation under reduced pressure, the column was purified by column chromatography using a spherical silica gel of 63 to 210 m A mixed solution of 30/70 EtOAc / CH2Cl2 with a diameter of 7.5 cm and a mobile phase of 30 cm and a mobile phase was purified by column chromatography to give the product Py2G1MeBip as a white product.

The chemical industry reduces the impact on the environment during synthesis 1-Bromo-3,5-dimethoxybenzene. I believe this compound will play a more active role in future production and life.

Reference:
Patent; KUNMING UNIVERSITY OF SCIENCE AND TECHNOLOGY; WANG, HUA; YANG, LI; LI, KONGZHAI; WEI, YONGGANG; ZHU, XING; (27 pag.)CN104231007; (2017); B;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 5111-65-9, The chemical industry reduces the impact on the environment during synthesis 5111-65-9, name is 2-Bromo-6-methoxynaphthalene, I believe this compound will play a more active role in future production and life.

A solution of 6-methoxy-2-bromonaphthalene (25 g) in tetrahydrofuran (300 ml) was cooled at -78C under a nitrogen atmosphere. n-Butyllithium (2.66 M solution in hexane) (42 ml) was added dropwise thereto over 1.5 hours, and the solution was stirred for 30 minutes. Triisopropyl borate (26.5 ml) was added dropwise thereto for 30 minutes, then the solution was stirred for 40 minutes while warming from -78C to 0C. 1N hydrochloric acid (200 ml) and ethyl acetate (200 ml) were sequentially added thereto, the solution was stirred, extracted with ethyl acetate, then washed with brine, dried over anhydrous magnesium sulfate, then the solvent was evaporated in vacuo, the resulting solid was washed with a hexane-diethyl ether system to provide the title compound (18 g).1H-NMR (400MHz, DMSO-d6); delta (ppm): 3.86 (s, 3H), 7.12 (d, 1H), 7.26 (s, 1H), 7.72 (d, 1H), 7.76-7.84 (m, 2H), 8.07 (brs, 2H), 8.27 (s, 1H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Bromo-6-methoxynaphthalene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Eisai Co., Ltd.; EP1577288; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Some common heterocyclic compound, 104197-14-0, name is 4-Bromo-2,6-difluoroanisole, molecular formula is C7H5BrF2O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 4-Bromo-2,6-difluoroanisole

The mixture of 5-bromo-l,3-difluoro-2-methoxy-benzene (2.6 g, 11.7 mmol), ethynyl (trimethyl)silane (1.145g, 11.7 mmol), N,N-Diisopropylethylamine (1.205 g, 9.33 mmol), Copper(I)Iodide (177.6 mg, 0.93 mmol) and Bis(Triphenylphosphine)palladium (II) chloride (340.4 mg, 0.47 mmol) in THF (20 mL) were heated at 60 C under a nitrogen atmosphere for 16 hours. Added water (50 mL) and extracted by EtOAc (60 mL), washed EtOAc phase with water (50 mL), brine (50 mL), dried over Na2S04, filtered and concentrated to give a residue. The residue was purified by slica gel column (pure PE) to afford the title compound as an oil.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 104197-14-0, its application will become more common.

Reference:
Patent; GALECTO BIOTECH AB; BRIMERT, Thomas; JOHNSSON, Richard; LEFFLER, Hakon; NILSSON, Ulf; ZETTERBERG, Fredrik; (284 pag.)WO2016/120403; (2016); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 64115-88-4,Some common heterocyclic compound, 64115-88-4, name is 1-Bromo-2-(trifluoromethoxy)benzene, molecular formula is C7H4BrF3O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1: tert-butyl 1-(2-(trifluoromethoxy)phenyl)piperidin-4-ylcarbamate A mixture of 1-bromo-2-(trifluoromethoxy)benzene (2.40 g, 9.96 mmol), tert-butyl N-(4-piperidyl)carbamate (1.99 g, 9.96 mmol), Pd2(dba)3 (546 mg, 597 umol), BINAP (744 mg, 1.20 mmol), t-BuONa (6.47 g, 69 mmol) in toluene (50 mL) was stirred at 90 C. for 16 h. Cooled to rt, filtered and concentrated, eluted with EtOAc (50 mL), washed with H2O (100 mL), then extracted with EtOAc (100 mL*3), washed with brine (50 mL*2), dried, concentrated to afford methyl 5-formyl-2,4-dimethylbenzoate (1.6 g, 32.6%) as brown gum. ESI-MS (EI+, m/z): 361 [M+H]+.

The synthetic route of 64115-88-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Navitor Pharmaceuticals, Inc.; O’Neill, David John; Saiah, Eddine; Kang, Seong Woo Anthony; Brearley, Andrew; Bentley, Jonathan; (519 pag.)US2018/127370; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 157869-15-3, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 157869-15-3, name is 2-((4-Methoxyphenyl)ethynyl)aniline, This compound has unique chemical properties. The synthetic route is as follows.

1 k (0.3 mmol, 67 mg), [RhCp*Cl2] 2 (0.015 mmol, 9.3 mg) and hexafluoroisopropanol (2 mL) were sequentially added to a 15 mL reaction tube.The reaction tube was sealed in an air atmosphere, and the reaction was stirred at 120 C for 20 h. After the completion of the reaction, the reaction tube was cooled to room temperature, and 10 mL of water was added thereto, followed by extraction with ethyl acetate (10 mL × 3), and the organic phase was washed successively with water and brine, and dried over anhydrous sodium sulfate. filter,Spin dry, separated by silica gel column (petroleum ether / ethyl acetate = 5 / 1)The white solid product 2k (35 mg, 72%).

The chemical industry reduces the impact on the environment during synthesis 2-((4-Methoxyphenyl)ethynyl)aniline. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Henan Normal University; Fan Xuesen; Jia Ruixue; Zhang Xinying; Li Bin; (18 pag.)CN110183443; (2019); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 944317-92-4, A common heterocyclic compound, 944317-92-4, name is 1-Bromo-4-fluoro-5-isopropyl-2-methoxybenzene, molecular formula is C10H12BrFO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A 500 mL dry flask was charged with 2-bromo-5-fluoro-4-isopropylanisole (compound of formula 4, Scheme 3) (24.6 g, 0.1 mol) and dissolved in toluene (80 mL) and THF (80 mL). The resulting solution was flushed with argon, and tri-isopropylborate (32 mL, 0.14 mol) was added. The mixture was cooled to -80 C. Then 10 M n-BuLi in hexanes (12.5 mL, 0.125 mol) was added slowly, maintaining a temperature below -55C. Thirty minutes after completion of the n-BuLi addition, the reaction was warmed to -35C and quenched into 3 M H2SO4 solution (75 mL, 0.225 mol). DIPE (200 mL) was added to the mixture to dilute the organic layer. The mixture was stirred (15 min) and the aqueous layer was cut away. The organic layer was washed with 3.0 M H2SO4 (75 mL). The organic phase was extracted three times with 1 M NaOH (200 mL first and then 50 mL and 50 mL). The three NaOH extractions were combined, diluted with 2-propanol (85 mL), and cooled to 15 C. Then the solution was slowly acidified to pH ~ 2 using 3 M H2SO4 (70 mL) while maintaining temperature at 15-20 C. The resulting slurry was stirred for 1 hour and then filtered. The filter cake was washed with water (3 x 30 mL) and dried under an air flow for 1 day. The white crystalline solid was isolated to yield boronic acid of formula 5 (Scheme 3) (19.23 g, 91%): mp 100-102 C; 1H NMR (CDCl3) delta 1.25 (d, J = 6.9 Hz, 6H), 3.17 (sept., J = 6.9 Hz, 1H), 3.88 (s, 3H), 5.83 (s, 2H), 6.59 (d, J =12.4 Hz, 1H), 7.72 (d, J = 6.6 Hz, 1H). The impurity 5-ethyl-4-fluoro-2-methoxyphenylboronic acid (~4%), which is formed from 1-bromo-5-ethyl-4-fluoro-2-methoxybenzene (BrMET) present in the starting material under the conditions described in Step 4, was detected in the product.

The synthetic route of 944317-92-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; LEK Pharmaceuticals d.d.; EP2468736; (2012); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 25245-34-5, name is 2-Bromo-1,4-dimethoxybenzene belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 25245-34-5

To a solution of LDA (7.4 mL, 1.1 eq) in THF (15 mL) were added furan (15 mL) and l-bromo-2,5-dimethoxybenzene (2.16 g, 10 mmol) in turn at -78 C. The mixture was stirred at this temperature for 30 mins and quenched with water and then the mixture was allowed to warm up to rt and extracted with ethyl ether (50 mL x 3). The combined organic layers were dried over anhydrous Na2SC>4 and concentrated in vacuo. The residue was purified by silica gel column chromatography (Hex/EtOAc (v/v) = 1/1) to give the title compound as a white solid (2.1 g, 86%). The compound was characterized by the following spectroscopic data: NMR (400MHz, CDC13) delta 7.06 (2H, s), 6.97 (2H, s), 6.54 (2H, s), 5.92 (2H, s), 3.78 (6H, s) ppm.

The synthetic route of 25245-34-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SUNSHINE LAKE PHARMA CO., LTD.; ZHANG, Yingjun; ZHANG, Jiancun; XIE, Hongming; REN, Qingyun; HU, Bailin; LI, Shifeng; WU, Xiwei; TANG, Changhua; WANG, Chenglin; FANG, Qinghong; YU, Quanxing; ZHANG, Zhikeng; WO2014/131315; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 1462-37-9, These common heterocyclic compound, 1462-37-9, name is ((2-Bromoethoxy)methyl)benzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Stage 1; – /V-{1-[2-(Benzyloxy)ethyl]piperidin-4-yl}-4-{[(7R)-8-cyclopentyl-7-ethyl-5-methyl-6- oxo-5,6,7,8-tetrahydropteridin-2-yl]amino}-3-methoxybenzamide To a solution of Intermediate C (300mg, 0.59mmol) in DMF (3ml), was added benzyl-2- bromoethylether (0.09ml, 0.59mmol), K2CO3 (163mg, 1.18mmol) and NaI (catalytic amount). The reaction mixture was stirred for 18 hours at 50 °C, cooled to RT and partitioned between EtOAc (10ml) and water (10ml). The aqueous layer was re-extracted with EtOAc (2 x 10ml) and the combined organic layers were washed with water (2 x 10ml), brine (2 x 15mL), dried (MgSO4), and concentrated under reduced pressure. Purification by column chromatography (5 – 10percent MeOH in DCM) afforded the title product (213mg, 56percent). ESMS m/z 642 [M+H]+

Statistics shows that ((2-Bromoethoxy)methyl)benzene is playing an increasingly important role. we look forward to future research findings about 1462-37-9.

Reference:
Patent; CHROMA THERAPEUTICS LTD.; WO2008/50078; (2008); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 59557-91-4, The chemical industry reduces the impact on the environment during synthesis 59557-91-4, name is 4-Bromo-2-methoxyaniline, I believe this compound will play a more active role in future production and life.

A stirred solution of NaNO2 (5.63 g, 81.7 mmol) in conc. HCl (6.2 ml) was cooled to 10 C. 4-bromo-2-methoxy-phenylamine (15 g, 74 mmol) in HOAc (100 ml) was added at such a rate that the temperature of the r.m. was maintained below 10 C. After addition was completed, the mixture was stirred at r.t. for 30 min. This solution was added dropwise, to a stirring solution of KI (37 g, 223 mmol) in 48% HBr (200 ml) at r.t. This mixture was stirred for 1 h and was then diluted with ice water (1000 ml). The resulting white precipitate was collected by filtration and washed with H2O, yielding a solid (a) and the mother liquor (b).The solid (a) was suspended in a mixture of DCM and a sat. aq. Na2CO3 solution. The resulting slurry was filtered over diatomaceous earth. The organic layer of the filtrate was washed with a diluted NH4OH solution until the disappearance of blue colour. The organic phase was dried (MgSO4), filtered and evaporated to yield a brown solid. The mother liquor (b) was basified by the addition of solid Na2CO3 and was then extracted with DCM. The combined organic extracts were washed with a diluted NH4OH solution until the disappearance of blue colour. The organic phase was dried (MgSO4), filtered and evaporated to give a brown solid.The 2 brown solids were combined, yielding 24.0 g of intermediate 54 (91%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Bromo-2-methoxyaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Van Brandt, Sven Franciscus Anna; De Cleyn, Michel Anna Jozef; Gijsen, Henricus Jacobus Maria; Berthelot, Didier Jean-Claude; Surkyn, Michel; US2012/295891; (2012); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Some common heterocyclic compound, 13321-74-9, name is 4-Bromo-2,5-dimethoxytoluene, molecular formula is C9H11BrO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 4-Bromo-2,5-dimethoxytoluene

General procedure: NaOt-Bu (0.240 g, 2.5 mmol), Pd(OAc)2 (0.006 g, 0.025 mmol) and [HPt-Bu3][BF4] (0.010 g, 0.035 mmol) were suspended in toluene (3 ml) in a 5 ml microwave vial. The appropriate 2-chloroaniline (0.50 mmol) and aryl bromide (0.50 mmol) were then added and the vial sealed. The reaction was then heated in the microwave reactor at 160 C for 3 h, allowed to cool, and then quenched by addition of aqueous HCl (2 M, 3 ml). The organic phase was extracted with CH2Cl2 (2×20 ml), dried (MgSO4), then filtered and the solvent removed under reduced pressure. The crude product mixture was then subjected to column chromatography (SiO2).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 13321-74-9, its application will become more common.

Reference:
Article; Bedford, Robin B.; Bowen, John G.; Weeks, Amanda L.; Tetrahedron; vol. 69; 22; (2013); p. 4389 – 4394;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem