Month: September 2021

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 20781-20-8 as follows. Recommanded Product: (2,4-Dimethoxyphenyl)methanamine

To a solution of 2,4-dimethoxybenzylamine (Sigma-Aldrich) (6.6 mL, 43.5 mmol) in DCM (85 mL) was added saturated aqueous sodium bicarbonate solution (85 mL) and the mixture was stirred vigorously at RT for 15 min. Stirring was stopped; then thiophosgene (6.6 mL, 87 mmol) was added via syringe to the bottom layer. The mixture was stirred at RT for 90 min then the aqueous layer was separated and the organic layer was washed with brine, dried over Na2S04 and concentrated in vacuo twice from DCM to give l-(isothiocyanatomethyl)-2,4- dimethoxybenzene

According to the analysis of related databases, 20781-20-8, the application of this compound in the production field has become more and more popular.

Reference:
Patent; MERCK SHARP & DOHME CORP.; KHAN, Tanweer; SMITH, Elizabeth; WILLIAMS, Peter; WISCOUNT, Catherine; MCKITTRICK, Brian; MCCAULEY, John; (72 pag.)WO2018/106519; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Some common heterocyclic compound, 82172-73-4, name is O-(2-Methoxyethyl)hydroxylamine hydrochloride, molecular formula is C3H10ClNO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C3H10ClNO2

Example 6-7 [0239] The Z isomer of cyclopropyl(6,6-diphenyl-6,7-dihydro-1H-indazol-3-yl)methanone O-(2-methoxyethyl)oxime may be prepared in the following manner: [0240] A suspension of 0.74 g of cyclopropyl(6,6-diphenyl-6,7-dihydro-1H-indazol-3-yl)methanone and 0.70 g of O-(2-methoxyethyl)hydroxylamine hydrochloride in 50 cm3 of pyridine is refluxed for about 7 hours. The solution obtained is concentrated to dryness under reduced pressure (13 kPa). The residue is taken up in 150 cm3 of dichloromethane. The solution is washed with three times 80 cm3 of water, dried over magnesium sulphate, filtered and concentrated to dryness under reduced pressure (13 kPa). The mixture of the Z and E isomers is separated by flash chromatography on a column of silica [eluent: dichloromethane/methanol (98/2 by volume)], collecting 60 cm3 fractions. [0241] Fractions 111 to 135 are combined and concentrated to dryness under reduced pressure (13 kPa). 0.37 g of the Z isomer of cyclopropyl(6,6-diphenyl-6,7-dihydro-1H-indazol-3-yl)methanone O-(2-methoxyethyl)oxime, corresponding to Example 6-7A, is thus obtained in the form of a resin, the characteristics of which are as follows: [0242] 1H NMR spectrum: (300 MHz, (CD3)2SO d6 with addition of a few drops of CD3COOD d4, delta in ppm): from 0.70 to 0.90 (mt: 4H); 1.81 (mt: 1H); 3.22 (s: 3H); 3.40 (s: 2H); 3.56 (t, J=5.5 Hz: 2H); 4.13 (t, J=5.5 Hz: 2H); 6.25 (d, J=10 Hz: 1H); 6.89 (d, J=10 Hz: 1H); from 7.10 to 7.30 (mt: 10H). [0243] IR spectrum (solvent CCl4) [0244] 3459; 3316; 2932; 2882; 1597; 1492; 1446; 1386; 1291; 1145; 1126; 1069; 1027; 1007; 952; 894; 700; 683 and 541 cm-1 [0245] O-(2-Methoxyethyl)hydroxylamine hydrochloride may be prepared as described by Dae-Kee Kim et al., J. Med. Chem., 40, 15, 1997, 2363-2373.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 82172-73-4, its application will become more common.

Reference:
Patent; Aventis Pharma S.A.; US2004/162276; (2004); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 6358-77-6, name is 5-Bromo-2-methoxyaniline, A new synthetic method of this compound is introduced below., SDS of cas: 6358-77-6

A 50-mL round-bottom flask was charged with 5-bromo-2-methoxy aniline(Alfa Aesar, 1.00 g, 4.95 mmol), 3-chloro-4-methylphenylboronic acid (Acros, 1.69 g, 9.90 mmol), 1,1 ‘-bis(diphenylphosphino)ferrocene palladium(II)dichloride dichloromethane adduct (0.81 g, 0.99 mmol), and purged with nitrogen. 1,4-Dioxane (37.1 ml) and an aqueous sodium carbonate solution (1.9 M, 12.4 mL) were introduced and the reaction mixture was warmed to 80 C. After 90 min, the reaction mixture was allowed to cool to ambient temperature and diluted with aqueous HCI solution (1.0 M, 25 mL) and EtOAc (25 mL). The layers were separated and the aqueous layer extracted with additional EtOAc (2 x 25 mL). The combined organic layers were washed with brine (50 mL), dried over anhydrous magnesium sulfate, filtered, concentrated under reduced pressure and purified by flash column chromatography (100-g silica gel Biotage column, eluent: gradient, 0 to 40% EtOAc in heptane with DCM as a 5% additive) to afford 3′-chloro-4-methoxy-4′-methyl-[l,l’-bipheny 1]-3-amine (1.03 g, 4.16 mmol, 84.0 % yield) as a tan solid.

The synthetic route of 6358-77-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; USA Anjin Corporation; M .weisi; B .C.miergelamu; T .dining; J .siteerwogen; A .gusiman-peileisi; A .beiqiao; I .E.makesi; (177 pag.)CN107531705; (2018); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

These common heterocyclic compound, 107622-80-0, name is (4-Phenoxyphenyl)methanamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C13H13NO

General procedure: The appropriate pyrazole (1.0 equiv) was treated with phosgene(20% in toluene) at 0 C. The reaction mixture was stirred at room temperature for 1 h.The solvent was removed under reduced pressure and the crude carbamoyl chloride was redissolved in anhydrous CH2Cl2 (0.5 M). The appropriate amine (1.0 equiv) and Et3N (1.2 equiv) were dissolved in CH2Cl2 and cooled to 0 C. The crude carbamoyl chloride was added dropwise and the reaction mixture was stirred at room temperature for 16 h.The mixture was diluted with EtOAc, washed with saturated aqueous NaCl, and dried over Na2SO4. Evaporation under reduced pressure yielded the crude coupling product that was purified by flash chromatography (SiO2).

The synthetic route of (4-Phenoxyphenyl)methanamine has been constantly updated, and we look forward to future research findings.

Reference:
Article; Otrubova, Katerina; Srinivasan, Venkat; Boger, Dale L.; Bioorganic and Medicinal Chemistry Letters; vol. 24; 16; (2014); p. 3807 – 3813;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

27060-75-9, name is 1-Bromo-4-methoxy-2-methylbenzene, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Quality Control of 1-Bromo-4-methoxy-2-methylbenzene

This experiment was carried out four times. Tributyl(methoxy)stannane (400 g, 1.24 mol), 1-bromo-4-methoxy-2-methylbenzene (250 g, 1.24 mol), prop-1-en-2-yl acetate (187 g, 1.87 mol), palladium(ll) acetate (7.5 g, 33 mmol) and tri-o-tolylphosphine (10 g, 33 mmol) were stirred together in toluene (2 L) at 100 C for 18 hours. After it had cooled to room temperature, the reaction mixture was treated with aqueous potassium fluoride solution (4 M, 400 mL) and stirred for 2 hours at 40 C. The resulting mixture was diluted with toluene (500 mL) and filtered through diatomaceous earth; the filter pad was thoroughly washed with ethyl acetate (2 x 1 .5 L). The organic phase from the combined filtrates was dried over sodium sulfate, filtered, and concentrated in vacuo. Purification via silica gel chromatography (Gradient: 0% to 5% ethyl acetate in petroleum ether) provided the product as a yellow oil. Combined yield: 602 g, 3.38 mol, 68%. LCMS m/z 179.0 [M+H]+. 1H NMR (400 MHz, CDCl3) delta 7.05 (d, J=8.3 Hz, 1 H), 6.70- 6.77 (m , 2H), 3.79 (s, 3H), 3.65 (s, 2H), 2.22 (s, 3H), 2.14 (s, 3H).

The synthetic route of 27060-75-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PFIZER INC.; BRODNEY, Michael Aaron; DAVOREN, Jennifer Elizabeth; DOUNAY, Amy Beth; EFREMOV, Ivan Viktorovich; GRAY, David Lawrence Firman; GREEN, Michael Eric; HENDERSON, Jaclyn Louise; LEE, Chewah; MENTE, Scot Richard; O’NEIL, Steven Victor; ROGERS, Bruce Nelsen; ZHANG, Lei; WO2014/207601; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 116557-46-1, name is 3-Bromo-2-methoxyaniline, A new synthetic method of this compound is introduced below., Computed Properties of C7H8BrNO

General Procedure: Methyl 2-{[4-(chlorosulfonyl)-2,3-dimethylphenyl]oxy}propanoate (7) (4 g, 13.0 mmol) was dissolved in pyridine (10 mL). After 5 min, 3-bromo-2-chloroaniline (3.22 g, 15.6 mmol) was added. The reaction was complete within a few hours. The reaction mixture was then extracted using diethyl ether. The combined organic phases were washed with 1N HCl and brine, dried over sodium sulfate, filtered, and concentrated in vacuo to afford the title compound which was used without further purification.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Evans, Karen A.; Shearer, Barry G.; Wisnoski, David D.; Shi, Dongchuan; Sparks, Steven M.; Sternbach, Daniel D.; Winegar, Deborah A.; Billin, Andrew N.; Britt, Christy; Way, James M.; Epperly, Andrea H.; Leesnitzer, Lisa M.; Merrihew, Raymond V.; Xu, Robert X.; Lambert, Millard H.; Jin, Jian; Bioorganic and Medicinal Chemistry Letters; vol. 21; 8; (2011); p. 2345 – 2350;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

These common heterocyclic compound, 2688-84-8, name is 2-Phenoxyaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of 2-Phenoxyaniline

A solution of sodium nitrite (9.2 g, 0.135 mol) in water (20 ml) was added dropwise to a solution of 2-phenoxyaniline (25 g, 0.135 mol) in 40percent hydrobromic acid (50 ml) at 0° C. and stirred for another 10 minutes. Then the reaction mixture was added to the boiling mixture of cuprous bromide (21.3 g, 0.149 mol) in 40percent hydrobromic acid (50 ml) and after addition it was allowed to reflux for another 30 minutes. Reaction mixture was cooled, diluted with water and extracted with diethyl ether. The diethyl ether layer was washed with 5percent hydrochloric acid, 10percent potassium hydroxide, water, brine, dried over sodium sulfate and concentrated to give the crude intermediate. The sub.-title compound (14.8 g, 45percent) was obtained by column purification of the crude intermediate using pet ether as eluent

The synthetic route of 2-Phenoxyaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; US2008/15237; (2008); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 592-55-2, name is 1-Bromo-2-ethoxyethane, A new synthetic method of this compound is introduced below., category: ethers-buliding-blocks

A suspension solution of N-(1,5-dimethylpyrazol-3-yl)-2-fluoro-3-(trifluoromethyl)benzamide (0.50 g), 55% sodium hydride (0.07 g) in N,N-dimethylformamide (5 ml) was stirred at room temperature for 5 minutes. To this mixture, 2-ethoxyethyl bromide (0.38 g) and sodium iodide (catalytic quantity) were added and stirred for 17 hours. To the reaction solution, water was added and the reaction solution was extracted with ethyl acetate and then concentrated under vacuum. The residue obtained was purified by silica gel column chromatography (developing solvent: chloroform_methanol=18:1) to obtain a colorless solid substance of N-[1,2-dihydro-1,5-dimethyl-2-(2-ethoxyethyl)pyrazol-3-ylidene]-2-fluoro-3-(trifluoromethyl)benzamide (0.01 g). 1H-NMR, Mass and the melting points of these compounds are shown in Table 11.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; TAISHO PHARMACEUTICAL CO., LTD; EP1820504; (2007); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 589-10-6, These common heterocyclic compound, 589-10-6, name is (2-Bromoethoxy)benzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 2; PREPARATION OF 4-CHLORO-5-METHOXY-2-(2-PHENOXYETHYL)INDAN-l-ONE; 4-Chloro-5-methoxyindan-l-one (14.0 kg, 71.2 mol) (Example 1) was slurried in n- heptane (154 L). Glacial acetic acid (2.14 kg, 35.6 mol) was then added followed by 1,1- dimethylhydrazine (6.42 kg, 106.8 mol) such that the temperature remained <40C. The batch was then heated to 900C for 3 h. The batch was cooled to 600C, treated with THF (28 L) then concentrated to 40 L by distillation under atmospheric pressure. The resulting concentrate was cooled to 500C and diluted with THF (182 L). The THF solution was held overnight at <15C. The batch was cooled to -500C by direct injection of liquid N2, then n-hexyllithium (2.39 M in hexane, 21.2 kg, 71.2 mol) was added over 1.5 h, maintaining the internal temperature <-25C. The resulting slurry was aged between -30 and -200C for 30 min then a solution of beta-bromophenetole (14.4 kg) in THF (14 L) was added over 5 min, maintaining the internal temperature <-25C. The batch was then aged at -50C for 30 min. 6 N HCl (30 kg 37% HCl + 30 kg H2O) was charged to the mixture which was then aged at 500C until complete hydrolysis of the intermediate hydrazone was confirmed by HPLC (1.5 h). After cooling the batch to 200C, isopropyl acetate (56 L) was added and the aqueous layer was discarded. The organic phase was washed with water (75 L) then concentrated to 40 L using vacuum distillation at 4O0C. n-Heptane (40 L) was added and after aging for 30 min at 400C, 0.2% seed of the product ketone was added. The mixture was stirred for 1 h to allow a seed bed to develop, then a further 80 L of n-heptane was charged over 1 h at 400C. The resulting slurry was allowed to cool to 200C overnight then cooled to 5C over 1 h before filtering. The filter cake was washed with 4:1 heptanerisopropyl acetate (25 L), then sucked dry under a stream OfN2 for 3 h. The solid was dried in a vacuum oven at 45C for 48 h affording 20.2 kg of product as an off white solid in 88% yield. 1H NMR (400 MHz, CDCl3) delta 7.70 (IH, d, J = 8.4 Hz), 7.35-7.25 (2H, m), 7.04-6.88 (4H, m), 4.25-4.15 (2H, m), 4.00 (3H, s), 3.46-3.35 (IH, m)> 2.98-2.87 (2H, m), 2.54- 2.41 (IH, m), 2.03-1.89 (IH, m); 13C NMR (IOO MHz, CDCl3) delta 206J, 160.2, 158.8, 153.2, 130.8, 129.5, 123.6, 120.8, 119.7, 1 14.5, 111.6, 65.9, 56.8, 45.0, 32.2 <>31.0.

The synthetic route of 589-10-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK & CO., INC.; MERCK SHARP & DOHME LIMITED; WO2007/81895; (2007); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 39538-68-6, name is 2-Methoxy-4-methylaniline, A new synthetic method of this compound is introduced below., Computed Properties of C8H11NO

General procedure: In a threaded ACE glass pressure tube with a sealed Teflon screw cap equipped with a magnetic stirring bar, a mixture of 11a (0.200 g, 1.65 mmol), 12a (0.185 g, 1.65 mmol), p-TsOH (0.028 g, 0.16 mmol), and MS 4A (0.20 g) in toluene (10 mL) was stirred and heated at 130 C for 4.5 h under microwave irradiation (100 W). The solvent was removed under vacuum and the residue purified by column chromatography (silica gel, hexane-EtOAc, 98:2) to give 7a (0.32 g, 91%) as a brownishoil; Rf = 0.75 (hexane-EtOAc, 7:3).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Hernandez-Benitez, R. Israel; Zarate-Zarate, Daniel; Delgado, Francisco; Tamariz, Joaquin; Synthesis; vol. 49; 18; (2017); p. 4357 – 4371;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem