Month: September 2021

Related Products of 123652-95-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 123652-95-9, name is (3-Fluoro-4-methoxyphenyl)methanamine belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

6-Amino-N-(3-fluoro-4-methoxybenzyl)-2,5-dimethylthieno[3,2-e][1,2,4]triazolo[1,5-a]pyridine-7-carboxamide (Compound 2) In a vial equipped with a magnetic stir bar was added HATU (1.2 eq), compound E (1.0 eq), and DIEA (4.1 eq) in DMF (0.2 M). After 10 min, (3-fluoro-4-methoxyphenyl)methanamine (2.0 eq) was added. After 16 h, LCMS showed desired product. The reaction was passed through a syringe filter and purified by prep RP-HPLC Gilson, eluting 15-75% MeCN/water+0.1% TFA. Desired fractions were concentrated, in order to remove the acetonitrile. To the remaining aqueous mixture was added sat’d NaHCO3 and the mixture was extracted with EtOAc (3*). The collected organic layers were dried (MgSO4), filtered and concentrated to afford the desired product (37-48% yield). LCMS: RT=0.905 min, >98% 215 and 254 nM, m/z=400.2 [M+H]+. 1H NMR (400 MHz, d6-DMSO): delta 8.43 (t, J=5.8, 1H), 7.40 (s, 1H), 7.17-7.08 (m, 3H), 7.04 (s, 2H), 4.36 (d, J=5.8 Hz, 2H), 3.81 (s, 3H), 2.80 (s, 3H).

The synthetic route of (3-Fluoro-4-methoxyphenyl)methanamine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Vanderbilt University; Lindsley, Craig W.; Conn, P. Jeffrey; Engers, Darren W.; Jones, Carrie K.; Bridges, Thomas M.; Han, Changho; Felts, Andrew S.; (38 pag.)US2018/28501; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 767-91-9, name is 2′-Methoxyphenyl acetylene, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 767-91-9, category: ethers-buliding-blocks

General procedure: A dried Schlenk tube equipped with a magnetic stir bar was charged with the alkyne (1mmol), organic azide (1mmol), and Cu(PPh3)2NO3 (0.005mmol, 3.28mg). The mixture was stirred at rt (rt was ?25C) without exclusion of air under solvent-free conditions. After the reaction was completed, the mixture was diluted with ethyl acetate and filtered. The filtrate was removed under reduced pressure to obtain the crude product that was further purified by silica gel chromatography (petroleum ether/ethyl acetate (20: 1) as eluent) to yield the corresponding deuterated triazoles.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Wang, Dong; Chen, Si; Wang, Jing; Astruc, Didier; Chen, Baohua; Tetrahedron; vol. 72; 41; (2016); p. 6375 – 6379;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 150-78-7,Some common heterocyclic compound, 150-78-7, name is 1,4-Dimethoxybenzene, molecular formula is C8H10O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 2: Preparation of 2,5-dibromo-1 ,4-dimethoxybenzene (2); [00103] In a one liter round-bottom flask, a solution of bromine (35.2 g, 220 mmol) in chloroform (50 ml) was added dropwise to a solution of 1 ,4- dimethoxybenzene (13.8 g, 100 mmol) in chloroform (400 ml) under 00C. After stirring for 3 hours, 100 ml of saturated Na2CO3 solution was added. The organic layer was washed with water, brine, and dried over sodium sulfate. The solvent was removed on a rotary evaporator and the residue was performed recrystallization from ethanol to afford pure 2,5-dibromo-1 ,4- dimethoxybenzene (25.8 g, 85%). 1HNMR (CDCI3) 57.128 (s, 2 H), 3.873 (s, 6 H).

The synthetic route of 150-78-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AGENCY FOR SCIENCE, TECHNOLOGY AND RESEARCH; NATIONAL UNIVERSITY OF SINGAPORE; WO2006/93467; (2006); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 5414-19-7, These common heterocyclic compound, 5414-19-7, name is 1-Bromo-2-(2-bromoethoxy)ethane, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of 2-(4-phenylthiazol-2-yl)acetonitrile (0.84 g, 4.19 mmol) in THF (25 mL) was cooled to 0 C. NaH was added (0.5 g, 60% dispersion in oil) portionwise over 10 min. The resulting mixture was allowed to warm up to room temperature and stirred for 20 min. 2-Bromoethyl ether (1.58 mL, 12.5 mmol) was added dropwise. The reaction mixture was further stirred at room temperature for 1 h and then quenched with saturated NH4Cl solution. The reaction mixture was diluted with EtOAc and the organic layer was washed with H2O and brine. The organic layer was dried over anhydrous sodium sulfate and concentrated under reduced pressure. The residue was purified by column chromatography (silica gel 60-120 mesh, eluent 4-8% EtOAc in petroleum ether) to afford 4-(4-phenylthiazol-2-yl)tetrahydro-2H-pyran-4-carbonitrile (0.97 g, yield 85%) as a yellow solid: 1H NMR (300 MHz, CDCl3) delta 7.91-7.94 (m, 2H), 7.51 (s, 1 H), 7.37-7.48 (m, 3H), 4.07-4.14 (m, 2H), 3.87-3.96 (m, 2H), 2.32-2.43 (m, 4H). MS (ESI) m/z: Calculated for C15H14N2OS: 270.08; found: 271.2 (M+H)+.

The synthetic route of 5414-19-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Tempero Pharmaceuticals, Inc.; BALOGLU, Erkan; GHOSH, Shomir; LOBERA, Mercedes; SCHMIDT, Darby; EP2533783; (2015); B1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 5414-19-7, name is 1-Bromo-2-(2-bromoethoxy)ethane, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 5414-19-7, Recommanded Product: 5414-19-7

A solution of ethyl 3-aminothieno[2,3-bjpyridine-2-carboxylate (500 mg, 2.25 mmol), 1-bromo-2-(2-bromoethoxy)ethane (1.38 g, 6 mmol) and Cs2CO3 (1.63 g, 5 mmol) in DMA (30mL) was stirred for 3 hours at 80C. H20 (50 mL) was added and it was extracted withEA(3x). The organic layer was concentrated and purified by reverse phase C18 columnchromatography (MeCN/H20) to give desired compound as light brown oil. (500 mg, 76 %). ESI-MS m/z: 293.2 [M+Hf

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-2-(2-bromoethoxy)ethane, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ENANTA PHARMACEUTICALS, INC.; SHOOK, Brian, C.; KIM, In, Jong; BLAISDELL, Thomas, P.; YU, Jianming; PANARESE, Joseph; OR, Yat, Sun; (434 pag.)WO2017/15449; (2017); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 366-99-4,Some common heterocyclic compound, 366-99-4, name is 3-Fluoro-4-methoxyaniline, molecular formula is C7H8FNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 62; Synthesis of N,N’-dicyclopropyl-N-(3-fluoro-4-methoxy-phenyl)-1,3,5-triazine-2,4,6-triamine (157); To cyanuric chloride (0.368 g, 2 mmol) in CH3CN at about -20° C. was added 3-fluoro-p-anisidine (0.28 g, 2 mmol) in CH3CN followed by the addition of DIEA (0.39 mL, 2.2 mmol) and stirred for about I hour. The reaction mixture was then stirred at room temperature for about 1 hour. Then cyclopropylamine (1.39 mL, 20 mmol) and DIEA (0.39 mL, 2.2 mmol) were added and the reaction mixture was stirred overnight at rt. The reaction mixture was worked up as usual, diluted with ethyl acetate and washed with brine. The organic layer was separated and dried over sodium sulfate, filtered, concentrated under reduced pressure, and compound 157 was purified by silica gel column chromatography (200 mg, 30percent), mp 91-92° C.; HPLC: Inertsil ODS-3V C18, 40:30:30 [KH2PO4 (0.01 M, pH 3.2):CH3OH:CH3CN], 264 nm, Rt 8.6 min, 99.1percent purity; MS (ESI): m/z 331(M+H, 100), 305 (0.8), 151 (0.3).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3-Fluoro-4-methoxyaniline, its application will become more common.

Reference:
Patent; Timmer, Richard T.; Alexander, Christopher W.; Pillarisetti, Sivaram; Saxena, Uday; Yeleswarapu, Koteswar Rao; Pal, Manojit; Reddy, Jangalgar Tirupathy; Krlshna Reddy, Velagala Venkata Rama Murali; Sridevi, Bhatlapenumarthy Sesha; Kumar, Potlapally Rajender; Reddy, Gaddam Om; US2004/209880; (2004); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4463-59-6, name is 1-(2-Bromoethoxy)-2-methoxybenzene, A new synthetic method of this compound is introduced below., Recommanded Product: 1-(2-Bromoethoxy)-2-methoxybenzene

36 g(0.156 ml) of 2-(methoxyphenoxy)ethylbromide and 27.3 grams (0.186 mole) of phthalimide are dissolved in 100 ml of dimethylacetamide, and stirred with heat for diffusion to 90 C. After 30 minutes, 10.45 g(0.186 mole) of potassium hydroxide is dissolved in 30 ml of methanol solution for heating and diffusing over 1.5 hours. Upon cooling, the mixed solution is poured into 300 ml of water. After filtrating the extracted solids, 200 ml of 10% potassium carbonate solution is added, and stirred with heat. The paste-like substance obtained is filtrated. After rinsing with tap water several times, moisture-free alcohol is used for re-crystallization until while crystallization is obtained. 21 grams(0.071 mole) of the above product and 3.55 grams (0.071 mole) of hydrazine hydrate are dissolved in 70 ml of moisture-free alcohol, and upon heating and diffusing for 45 minutes, 20 ml of 18% hydrochloric acid is added into the mixture to continue the diffusion for one hour before cooling. After filtration, the residue obtained from reduction is mixed with 20% of sodium hydroxide for alkalization. Chloroform is used for extraction, and upon filtration and pressurized reduction, it is filled into the silicone tube for separation, while using ethyl acetate as the diluent to obtain an oily product, i.e. 2-(2-methoxy-phenoxy)ethylamine.

The synthetic route of 4463-59-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Chen, Ing-Jun; US2001/56211; (2001); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 366-99-4, name is 3-Fluoro-4-methoxyaniline, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C7H8FNO

Under room temperature, will 3-fluoro-4-anisidine (21.0 g, 0 . 15 mol) adding water in (100 ml). To the stirring mixture of lowering the temperature to -5 to 0 °C. To the obtained sequentially adding in a mixture of concentrated hydrochloric acid (45 ml), sodium nitrite solution (70 ml), 2-chloro-3-oxo butyric acid ethyl ester (24.7 g, 0 . 15 mol) of ethanol solution (150 ml) and sodium acetate (36.9 g, 0 . 45 mole) aqueous solution (150 ml). After the completion of the dropping, the obtained mixture of low-temperature stirring 0.5 hours. Furthermore, the obtained mixture to room temperature, stirring for 6 hours, a solid precipitated in the reaction process. After the completion of the reaction, the obtained by filtering the mixture. The filter cake obtained by vacuum drying, the silica gel column chromatography (PE:EA=10:1) product is obtained by purification of 36.5 g (yield: 88.6percent).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 366-99-4.

Reference:
Patent; CSPC Weisheng Pharmaceutical Technology (Shijiahuang) Co., Ltd.; Shi, Ying; Gao, Qingzhi; Mi, Yi; Wang, Xuliang; (129 pag.)CN105384739; (2016); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 36805-97-7, name is 1,1-Di-tert-butoxy-N,N-dimethylmethanamine, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 36805-97-7, Product Details of 36805-97-7

A solution of (S)-(+)-Z-4-amino-2-hydroxybutyric acid (5) (5 g, 19.74 mmol) in toluene (38 mL) containing N,N-dimethylformamide di-tert-butyl acetal (18.92 mL, 78.96 mmol) was heated to 95C for 3 h. The solvent was then evaporated and the crude product was purified by flash chromatography on silica gel (n-hexane/EtOAc = 7:4) to give (6) (3.4 g, 55.7 % yields) as yellow solid. Mp 42-44C; [alpha]20D= – 5.9 (c= 10.1 mg/ml, CHCl3) 1H-NMR (CDCl3) delta: 1.47 (s, 9H); 1.76-1.85 (m, 1H); 1.94-2.09 (m, 1H); 2.74 (br s, 1H); 3.36 (dd, J= 6.04 Hz, J= 11.99 Hz, 2H); 4.10 (dd, J= 4.02 Hz, J= 8.05 Hz, 1H); 5.09 (s, 2H); 5.21 (br s, 1H); 7.31-7.37 (m, 5H) Anal. Calcd. for C16H23NO5: C, 62.12; H, 7.49; N, 4.53. Found: C, 62.22; H, 7.48; N, 4.53.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Bracco Imaging S.p.A; EP2149568; (2010); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 106854-77-7, The chemical industry reduces the impact on the environment during synthesis 106854-77-7, name is 1-Bromo-4-(2,2,2-trifluoroethoxy)benzene, I believe this compound will play a more active role in future production and life.

Step 7: 1 -Benzyl-N,4-dimethyl-N-neopentyl-3-(4-(2,2,2-trifluoroethoxy)phenyl)-5- (trifluoromethyl)-1 H-pyrrole-2-carboxamide (SC-260)Under an nitrogen atmosphere 1 -benzyl-N,4-dimethyl-N-neopentyl-3-(4,4,5,5-tetramethyl-1 3,2- dioxaborolan-2-yl)-5-(trifluoromethyl)-1 H-pyrrole-2-carboxamide (106 mg, 0.216 mmol) was dissolved in DMF (1 mL) and L1OH (4 mg, 0.216 mmol), bis(tri-tert-butylphosphine)palladium (0) (6 mg, 0.014 mmol) and 1-bromo-4-(2,2,2-trifluoroethoxy)benzene (50 mg, 0.196 mmol) were subsequently added. The reaction mixture was stirred at 80C under microwave irridation for I h. The mixture was cooled to RT and the reaction was stopped by addition of 1 M NaOH solution (2 mL). The crude product was extracted with EtOAc (2×3 mL) and the combined organic layers were washed with water (3×1 mL), dried over Na2SO4, filtered and the solvent was removed under reduced pressure. The crude mass was purified by flash chromatography to give SC-260 (95 mg, 89.7 %).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-4-(2,2,2-trifluoroethoxy)benzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; GRUeNENTHAL GMBH; SCHUNK, Stefan; REICH, Melanie; STEINHAGEN, Henning; DAMANN, Nils; SKONE, Philip; HAMLYN, Richard; KIRBY, Robert; ROGERS, Marc; SUTTON, Kathy; WO2014/32801; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem