Month: September 2021

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 20781-20-8, name is (2,4-Dimethoxyphenyl)methanamine, A new synthetic method of this compound is introduced below., category: ethers-buliding-blocks

1-(2,4-Dimethoxyphenyl)methanamine (20.3 mL, 135 mmol) was added to asolution of C4 (10.3 g, 90.2 mmol) in methanol (200 mL), and the reaction mixture was stirred for 1 hour at room temperature. It was then cooled to -78 C; lithium borohydride solution (2 M in tetrahydrofuran, 45.1 mL, 90.2 mmol) was added drop-wise, and stirring was continued at -78 C for 2 hours. After slowly warming to room temperature overnight, the reaction mixture was quenched via careful addition of saturated aqueous sodium bicarbonate solution. Ethyl acetate (250 mL) and sufficient water to solubilize the precipitate were added, and the aqueous layer was extracted with ethyl acetate; the combined organic layers were dried over magnesium sulfate, filtered, and concentratedin vacuo. Silica gel chromatography (Gradient: 0% to 5% methanol in dichloromethane)provided the product as a colorless oil (10.4 g). Similar purification of mixed fractionsafforded additional product (3.7 g). Combined yield: 14.1 g, 53.1 mmol, 59%. H NMR(400 MHz, CDCI3) 7.13 (d, J=8.0 Hz, 1H), 6.42-6.47 (m, 2H), 3.99 (ddd, J=11.6, 4.6,1.5 Hz, 1H), 3.82 (5, 3H), 3.80 (5, 3H), 3.76 (5, 2H), 3.36-3.45 (m, 2H), 2.63-2.73 (m,1H), 1.85-1.92 (m, 1H), 1.78-1.85 (m, 1H), 1.38 (dddd, J=13, 12, 11,4.7 Hz, 1H), 1.20 (d, J=6.2 Hz, 3H), 1.10(ddd, J=11, 11, 11 Hz, 1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; PFIZER INC.; BRODNEY, Michael Aaron; CHAPPIE, Thomas Allen; CHEN, Jinshan Michael; COE, Jotham Wadsworth; COFFMAN, Karen Jean; GALATSIS, Paul; GARNSEY, Michelle Renee; HELAL, Christopher John; HENDERSON, Jaclyn Louise; KORMOS, Bethany Lyn; KURUMBAIL, Ravi G.; MARTINEZ-ALSINA, Luis Angel; PETTERSSON, Martin Youngjin; REESE, Matthew Richard; ROSE, Colin Richard; STEPAN, Antonia Friederike; VERHOEST, Patrick Robert; WAGER, Travis T.; WARMUS, Joseph Scott; ZHANG, Yuan; (193 pag.)WO2018/163066; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 59557-91-4, The chemical industry reduces the impact on the environment during synthesis 59557-91-4, name is 4-Bromo-2-methoxyaniline, I believe this compound will play a more active role in future production and life.

10.0 g (0.049 mol) of 4-bromo-2-methoxyaniline in a three-necked flask,Take 13.0 g (0.060 mol) of di-tert-butyl dicarbonate,It was dissolved in tetrahydrofuran.After reacting for 5 hours at 40 C., the solvent is distilled off and represented by the formula (K-1)14.7 g of compound was obtained.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-Bromo-2-methoxyaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; DIC Corporation; Horiguchi, Masahiro; Hayashi, Masanao; Kusumoto, Tetsuo; (46 pag.)JP5888544; (2016); B2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 41789-95-1, These common heterocyclic compound, 41789-95-1, name is 1-(3-Methoxyphenyl)-N-methylmethanamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Amine (1.2 equiv) and 3-bromotoluene (1 equiv) were added to an aqueous solution of TPGS-750-M-2% (1 mL/mmol). The mixture was degassed by bubbling Argon in through (5 min). NaO-t-Bu (1.5 equiv), of [(allyl)PdCl]2 (1.1%) and cBridp (4.4%) were added together to the previous solution. The mixture was stirred (at 1200 rpm) at 50 C (2-24 h). Volatiles were evaporated and the crude residue was purified by chromatographic column on silica gel using ethyl acetate and cyclohexane as solvent.

Statistics shows that 1-(3-Methoxyphenyl)-N-methylmethanamine is playing an increasingly important role. we look forward to future research findings about 41789-95-1.

Reference:
Article; Salome, Christophe; Wagner, Patrick; Bollenbach, Maud; Bihel, Frederic; Bourguignon, Jean-Jacques; Schmitt, Martine; Tetrahedron; vol. 70; 21; (2014); p. 3413 – 3421;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 7252-83-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7252-83-7, name is 2-Bromo-1,1-dimethoxyethane belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

A 100-mL, three-neck flask was charged with 2-bromo-l,l-dimethoxyethane 4 (23.2 g (16 mL, 137.2 mmol) and aqueous HBr (47.6% HBr by wt, 8.8 mmol/mL, 6.6 mL, 58.8 mmol), and the reaction mixture was heated to reflux (55C) for 2 hours. The mixture was allowed to cool to 40C, and solid NaHCC3 was added in small portions, until evolution of gas ceased. The resulting suspension was filtered, under vacuum, into a 500-mL, three-neck flask, and the filter cake was washed with isopropanol (200 mL). Solid 3,5-dibromopyrazin-2-amine (3) (12.0 g, 47.2 mmol) was added into the isopropanol filtrate, and the reaction mixture was heated at reflux (78C) for 16 hours. The resulting suspension was cooled to room temperature, filtered, the cake was washed with cold isopropanol (100 mL), and then the cake was dried under vacuum. The cake was transferred into a three-neck flask, into which, water (200 mL) was added, followed by solid K2CC3, in small portions, until gas evolution ceased, after which the reaction was stirred for 30 minutes. The resulting precipitate was isolated by filtration, and washed with water (200 mL). The solid was dried at 50C, to constant weight, then dissolved in THF, filtered through a plug (celite, silica gel, and charcoal). The solvent was removed under vacuum, to give 12.0 g of the desired product (5) as a white solid at 99% purity, as determined by NMR and LC-MS. IH NMR (500 MHz, CDC13) delta 8.26 (s, IH), 7.84 (d, J = 1.0 Hz, IH), 7.78 (d, J = 1.1 Hz, IH); 13C NMR (126 MHz, CDC13) delta 136.93, 134.06, 120.29, 119.26, 115.78.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Bromo-1,1-dimethoxyethane, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; DOW GLOBAL TECHNOLOGIES LLC; ROHM AND HAAS ELECTRONIC MATERIALS KOREA LTD.; ONDARI, Mark E.; WELSH, Dean M.; FROESE, Robert DJ; NA, Hong-Yeop; (38 pag.)WO2016/209895; (2016); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 93919-56-3, These common heterocyclic compound, 93919-56-3, name is (4-(Trifluoromethoxy)phenyl)methanamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Commercially available amines (20 mmol) were dissolved in dry DMF (40 ml) under nitrogen. To this solution, Et3N (20 mmol) was added and bromoacetyl bromide (20 mmol) via syringe at 0 C under nitrogen. The mixture was stirred at 0 C for 30 min and then at room temperature for another 2 h. Next, solid NaN3 (30 mmol) was added, and the reaction mixture was stirred overnight. The mixture was poured into water (100 ml) and extracted with EtOAc (3 x 100 ml). The combined extracts were washed with water (3 x 50 ml) and brine (50 ml). The organic layer was dried over Na2SO4, filtered, and evaporated under reduced pressure. Silica gel flash chromatography (10 % ethyl acetate in hexane) gave the desired azide product in 70-90 % isolated yield.

Statistics shows that (4-(Trifluoromethoxy)phenyl)methanamine is playing an increasingly important role. we look forward to future research findings about 93919-56-3.

Reference:
Article; Kumbhare, Ravindra M.; Dadmal, Tulshiram L.; Pamanji; Kosurkar, Umesh B.; Velatooru; Appalanaidu; Rao, Y. Khageswara; Rao, J. Venkateswara; Medicinal Chemistry Research; vol. 23; 10; (2014); p. 4404 – 4413;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 17715-69-4, These common heterocyclic compound, 17715-69-4, name is 1-Bromo-2,4-dimethoxybenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A suspension of Pd2(dba)3 (6.9mg, 0.0075mmol), tBu3PHBF4 (8.7mg, 0.03mmol), KOH (42mg, 0.75mmol), aryl bromide 4 (0.36mmol) and tetralone 3 (0.3mmol) in a mixture of dioxane/water (4:1, v/v, 3mL) was degassed and heated under Ar and microwave irradiation (80W of initial power, 100°C, 40min, infrared probe). Then, the mixture was allowed to cool to rt, diluted in AcOEt, washed with saturated NH4Cl solution, dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure. The crude material was purified by silica gel chromatography. Dioxane quality is extremely important for the success of the reaction. Characterization of alpha-aryl-alpha-tetralones is given in Ref.[26].

Statistics shows that 1-Bromo-2,4-dimethoxybenzene is playing an increasingly important role. we look forward to future research findings about 17715-69-4.

Reference:
Article; Fernandes, Talita de A.; Costa, Paulo R. R.; Manvar, Dinesh; Basu, Amartya; Kaushik-Basu, Neerja; Domingos, Jorge L. O.; Nichols, Daniel Brian; European Journal of Medicinal Chemistry; vol. 112; (2016); p. 33 – 38;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

These common heterocyclic compound, 36805-97-7, name is 1,1-Di-tert-butoxy-N,N-dimethylmethanamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 1,1-Di-tert-butoxy-N,N-dimethylmethanamine

(b) tert-Butyl1-(trifluoroacetyl)azetidine-3-carboxylate 1,1-di-tert-butoxy-N,N-dimethylmethanamine (16.5 g, 81 mmol) was added to a solution of 1-(trifluoroacetyl)azetidine-3-carboxylic acid (5 g, 25 mmol) and the mixture was heated to reflux for 8 hours. LC-MS showed remaining starting material and therefore an additional amount of 1,1-di-tert-butoxy-N,N-dimethylmethanamine (21.2 g, 81 mmol) was added and the heating was continued over night. LC-MS showed still some remaining starting material (starting material/product about 1/2) and the THF was exchanged for toluene (100 mL) and the mixture heated to 100 C. (oil bath temperature) for 2 hours. The solvent was evaporated and the residue dissolved in EtOAc (200 mL). The organic phase was washed with NaHCO3(sat) (2*50 mL), water (2*50 mL), Brine (50 mL), dried (Na2SO4), filtered and evaporated to give the desired product. Yield: 4.5 g (70%).

The synthetic route of 1,1-Di-tert-butoxy-N,N-dimethylmethanamine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AstraZeneca AB; US2008/171732; (2008); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 767-91-9, name is 2′-Methoxyphenyl acetylene, A new synthetic method of this compound is introduced below., Product Details of 767-91-9

General procedure: To a mixture of alpha-azidoamide 16aa (34 mg, 0.20 mmol) and phenylacetylene (9a; 24 L,0.20 mmol) in t-BuOH/H2O (2 mL, 1:1) were added 0.5 M CuSO4 (0.020 mL, 0.010 mmol) and 1.0 M sodium ascorbate (0.020 mL, 0.020 mmol). The reaction mixture was stirred at room temperature for 1 day, and then the resulting reaction mixture was filtered. The separated solid was washed with H2O and hexanes, and triturated with hexane/EtOAc (10:1) to give the 1-morpholino-2-(4-phenyl-1H-1,2,3-triazol-1-yl)ethanone (2aaa; 52 mg, 96%) as a white solid

The synthetic route of 767-91-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Lee, Doohyun; Kim, Daehun; Lee, Seungyeon; Kim, Taegeum; Kim, Joobin; Kim, Sohee; Liu, Kwang-Hyeon; Lee, Sangkyu; Bae, Jong-Sup; Song, Kyung-Sik; Cho, Chang-Woo; Son, Youn Kyung; Baek, Dong Jae; Lee, Taeho; Molecules; vol. 20; 11; (2015); p. 19984 – 20013;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 116557-46-1, name is 3-Bromo-2-methoxyaniline, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C7H8BrNO

Step 3[00174j IntlO (2.0 g, 9.9 mmol) was dissolved in dioxane (40 mL) and the vessel purged with nitrogen for 5 minutes. Next bis(pinacolato)diborone (3.77 g, 14.85 mmol), [1,1 ?-bis(diphenylphosphino)ferrocene] dichloropalladium (II) complex with dichloromethane (404 mg, 0.49 mmol) and potassium acetate (2.91 g, 29.7 mmol) were added. The flask was evacuated and backfilled with nitrogen, and then heated to 100 Cfor 15 hours. Water was added to quench the reaction and the product was then extracted with EtOAc. The combined organic layers were washed with brine (x3), dried over sodium sulfate, filtered, concentrated and purified using automated chromatography (elutes at 40% ethyl acetate) to provide Intl 1 (2.0 g, 8 1%). ?H NMR (400MHz, chloroform-d) oe 7.12 (dd,J=7.3, 1.8 Hz, 1H), 6.96-6.89 (m, 1H), 6.88-6.83 (m, 1H),3.82 (s, 3H), 1.37 (s, 12H). LC retention time 0.65 [J]. m/z: 250 (MHj.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 116557-46-1.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; MOSLIN, Ryan M.; WEINSTEIN, David S.; WROBLESKI, Stephen T.; TOKARSKI, John S.; KUMAR, Amit; WO2014/74661; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 216067-66-2, name is O-(2,4-Dimethoxybenzyl)hydroxylamine belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Product Details of 216067-66-2

General procedure: To a solution of 2a (0.200 g, 0.651 mmol), 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC.HCl, 0.150 g, 0.781 mmol)and 4-dimethylaminopyridine (DMAP, 8 mg, 0.065 mmol) in CH2Cl2(30 mL) was added O-benzylhydroxylamine hydrochloride (0.125 g;0.781 mmol) and N-methylmorpholine (NMM, 0.086 mL, 0.781 mmol),and the mixture was stirred at room temperature (r.t.) for 16 h. Thefinal solution was evaporated, dissolved in EtOAc (25 mL) and washedwith 0.1 M HCl (3 × 25mL), 0.1 M NaOH (2 × 25 mL) and then H2O(1 × 25 mL). The final organic phase was dried over anhydrous Na2SO4,and the solvent evaporated. The crude was recrystallized from Et2O/n-hexane, affording the pure compound as white solid

The synthetic route of 216067-66-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Marques, Sergio M.; Abate, Claudia C.; Chaves, Silvia; Marques, Fernanda; Santos, Isabel; Nuti, Elisa; Rossello, Armando; Santos, M. Amelia; Journal of Inorganic Biochemistry; vol. 127; (2013); p. 188 – 202;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem