Month: October 2021

An article Surpassing the 10% efficiency milestone for 1-cm(2) all-polymer solar cells WOS:000484992300002 published article about POWER CONVERSION EFFICIENCY; MOLECULAR-ORIENTATION; CONJUGATED POLYMERS; PERFORMANCE; ABSORPTION in [Fan, Baobing; Zhong, Wenkai; Ying, Lei; Zhang, Difei; Li, Meijing; Lin, Yanrui; Xia, Ruoxi; Yip, Hin-Lap; Ma, Yuguang; Huang, Fei; Cao, Yong] South China Univ Technol, State Key Lab Luminescent Mat & Devices, Inst Polymer Optoelect Mat & Devices, Guangzhou 510640, Guangdong, Peoples R China; [Liu, Feng] Shanghai Jiao Tong Univ, Dept Phys & Astron, Shanghai 200240, Peoples R China; [Li, Ning; Brabec, Christoph J.] Friedrich Alexander Univ Erlangen Nurnberg, I MEET, Martensstr 7, D-91058 Erlangen, Germany; [Li, Ning; Brabec, Christoph J.] Helmholtz Inst Erlangen Nurnberg Renewable Energy, Immerwahrstr 2, D-91058 Erlangen, Germany; [Li, Ning] Zhengzhou Univ, Natl Engn Res Ctr Adv Polymer Proc Technol, Zhengzhou 450002, Henan, Peoples R China in 2019, Cited 35. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4. COA of Formula: C14H14O

Naphthalenediimide-based n-type polymeric semiconductors are extensively used for constructing high-performance all-polymer solar cells (all-PSCs). For such all-polymer systems, charge recombination can be reduced by using thinner active layers, yet suffering insufficient near-infrared light harvesting from the polymeric acceptor. Conversely, increasing the layer thickness overcomes the light harvesting issue, but at the cost of severe charge recombination effects. Here we demonstrate that to manage light propagation within all-PSCs, a thick bulk-heterojunction film of approximately 350 nm is needed to effectively enhance photo-harvesting in the near-infrared region. To overcome the severe charge recombination in such a thick film, a non-halogenic additive is used to induce a well-ordered micro-structure that inherently suppresses recombination loss. The combined strategies of light management and delicate morphology optimization lead to a promising efficiency over 10% for thick-film all-PSCs with active area of 1 cm(2), showing great promise for future large-scale production and application of all-PSCs.

COA of Formula: C14H14O. About Benzyl ether, If you have any questions, you can contact Fan, BB; Zhong, WK; Ying, L; Zhang, DF; Li, MJ; Lin, YR; Xia, RX; Liu, F; Yip, HL; Li, N; Ma, YG; Brabec, CJ; Huang, F; Cao, Y or concate me.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Recently I am researching about TIME-OF-FLIGHT; PLASTIC BABY BOTTLES; PACKAGING MATERIALS; EXTRACTION METHOD; QUADRUPOLE-TIME; SUBSTANCES; IDENTIFICATION; MIGRATION; MS; OPTIMIZATION, Saw an article supported by the China Scholarship CouncilChina Scholarship Council [201706780010]; Gobierno de AragonGobierno de Aragon; Fondo Social EuropeoEuropean Social Fund (ESF)European Commission. Safety of Diphenyl oxide. Published in AMER CHEMICAL SOC in WASHINGTON ,Authors: Su, QZ; Vera, P; Nerin, C. The CAS is 101-84-8. Through research, I have a further understanding and discovery of Diphenyl oxide

Toward a more rigorous inspection of food contact materials, the importance of sample preparation for nontarget screening should be addressed. Direct immersion-solid-phase microextraction coupled to gas chromatography mass spectrometry (DI-SPME-GC-MS) was optimized for nontarget screening of migrants in 3% acetic acid, 10% ethanol, and 95% ethanol food simulants by response surface methodology (RSM) in the present study. Optimum conditions were DVB/CAR/PDMS fiber, no pH adjustment for 10% and 95% ethanol simulant but pH adjustment to 7 for 3% acetic acid simulant, no salt addition, 5 min preincubation, 55 min extraction at 70 degrees C, and 8 min desorption at 250 degrees C. In addition, 9.5 times dilution of 95% ethanol samples prior to extraction was required. pH modification of 3% acetic acid samples was found to be critical for the extraction of amines. The proposed methodology was then evaluated by determining the limit of detection (LOD) as well as repeatability of 35 food contact materials-related substances. Except for those amines and diols which have a relatively high LOD, the LODs of the rest of the substances were 0.1-14.1 mu g/kg with a precision of 1.9-23.0% in 10% ethanol and were 0.1-20.2 mu g/kg with a precision of 2.5-19.6% in 3% acetic acid simulant. The LOD and precision in 95% ethanol simulant were 0.7-163.7 mu g/kg and 1.4-26.8%, respectively. The proposed method can be applied for an overall screening of migrants from these three simulants at even trace levels, though attention should be paid to some specific analytes, e.g., diols and amines, which could have a high LOD and toxicity.

About Diphenyl oxide, If you have any questions, you can contact Su, QZ; Vera, P; Nerin, C or concate me.. Safety of Diphenyl oxide

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Name: Benzyl ether. I found the field of Gastroenterology & Hepatology very interesting. Saw the article The Influence of Disease Activity on Pregnancy Outcomes in Women With Inflammatory Bowel Disease: A Systematic Review and Meta-Analysis published in 2021, Reprint Addresses Park, JJ (corresponding author), Yonsei Univ, Severance Hosp, Dept Internal Med, Div Gastroenterol,Coll Med, 50-1 Yonsei Ro, Seoul 03722, South Korea.. The CAS is 103-50-4. Through research, I have a further understanding and discovery of Benzyl ether.

Background and Aims: Robust evidence regarding the impact of disease activity on pregnancy outcomes in women with inflammatory bowel disease [IBD] is crucial for both clinicians and patients in preparing a birth plan. We sought to perform a systematic review and meta-analysis to assess the pooled influences of disease activity on pregnancy outcomes in women with IBD. Methods: We searched MEDLINE, EMBASE and the COCHRANE library to identify articles comparing pregnancy outcomes between active and inactive IBD at the time of conception or during pregnancy. A meta-analysis was performed using a random-effects model to pool estimates and report odds ratios [ORs]. Results: A total of 28 studies were identified as eligible for the meta-analysis. In women with active IBD, the pooled ORs for low birth weight [LBW], preterm birth, small for gestational age [SGA], spontaneous abortion and stillbirths were respectively 3.81 (95% confidence interval [CI] 1.81-8.02), 2.42 [95% CI 1.74-3.35], 1.48 [95% CI 1.19-1.85], 1.87 [95% CI 1.17-3.0] and 2.27 [95% CI 1.03-5.04] compared to women with inactive IBD. In the subgroup analysis based on disease type, women with active ulcerative colitis had an increased risk of LBW, preterm birth and spontaneous abortion. Women with active Crohn’s disease had a higher risk of preterm birth, SGA and spontaneous abortion. Conclusions: Active IBD during the periconception period and pregnancy is associated with an increased risk of adverse pregnancy outcomes. Our data suggest that pregnancy should be planned when the disease is quiescent, and continuous disease control is important even during pregnancy.

Name: Benzyl ether. About Benzyl ether, If you have any questions, you can contact Kim, MA; Kim, YH; Chun, J; Lee, HS; Park, SJ; Cheon, JH; Il Kim, T; Kim, WH; Park, JJ or concate me.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

In 2019.0 RUSS J PHYS CHEM A+ published article about N-BUTYLBENZENE; PYROLYSIS in [Shakun, V. A.; Nesterova, T. N.; Spiridonov, S. A.] Samara State Tech Univ, Samara, Russia; [Tarazanov, S., V] All Russian Res Inst Oil Refining, Moscow 111116, Russia in 2019.0, Cited 16.0. The Name is Diphenyl oxide. Through research, I have a further understanding and discovery of 101-84-8. COA of Formula: C12H10O

In the temperature range of 703-763 K, the thermal stability of 4-tert-butyl diphenyl oxide (4-TBDPO) has been studied, the components of the thermolysis reaction mass have been identified, a kinetic model of the process has been proposed, and the rate constants and parameters of the Arrhenius equation for all reactions under consideration have been calculated. The predominant role of isomerization transformations of 4-TBDPO has been found. A mechanism for the radical isomerization of the tert-butyl substituent has been proposed.

COA of Formula: C12H10O. About Diphenyl oxide, If you have any questions, you can contact Shakun, VA; Nesterova, TN; Tarazanov, SV; Spiridonov, SA or concate me.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Category: ethers-buliding-blocks. In 2020.0 ACS CATAL published article about CATALYTIC REDUCTIVE FRACTIONATION; SELECTIVE HYDRODEOXYGENATION; OXIDATIVE CLEAVAGE; ALCOHOL OXIDATION; AROMATIC MONOMERS; MODEL COMPOUNDS; BIOMASS; CONVERSION; VALORIZATION; CHEMICALS in [Li, Lingxiao; Dong, Lin; Li, Didi; Guo, Yong; Liu, Xiaohui; Wang, Yanqin] East China Univ Sci & Technol, Sch Chem & Mol Engn, Res Inst Ind Catalysis, Shanghai Key Lab Funct Mat Chem, Shanghai 200237, Peoples R China in 2020.0, Cited 59.0. The Name is Diphenyl oxide. Through research, I have a further understanding and discovery of 101-84-8.

Lignin is constructed from methoxylated phenylpropanoid with plenty of hydroxys and methoxys. Its conversion to valuable products is extremely attractive but especially challenging without additional hydrogen sources. Herein we report a hydrogen-free production of 4-alkylphenols directly from native lignin via self-reforming-driven depolymerization and hydrogenolysis over Pt/NiAl2O4. This is the first example of acquiring 4-alkylphenols from native lignin. Using this strategy, high yields of 4-alkylphenols, 17.3 wt %, were obtained from birch lignin. Reaction pathway and mechanism studies revealed that this strategy initiates from the reforming of aliphatic hydroxys, followed by the cleavage of C-O linkages, and ends via demethoxylation over Pt/NiAl2O4. Moreover, the subsequent aqueous phase reforming of the as-formed methanol accelerates the whole process. This strategy realizes the one-pot production of 4-alkylphenols from lignin by fully utilizing the structural hydrogen in lignin and H2O, providing a low-cost and safe method of lignin valorization.

Category: ethers-buliding-blocks. About Diphenyl oxide, If you have any questions, you can contact Li, LX; Dong, L; Li, DD; Guo, Y; Liu, XH; Wang, YQ or concate me.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

In 2020.0 FUEL PROCESS TECHNOL published article about C-O BONDS; SELECTIVE HYDRODEOXYGENATION; MODEL; PLATINUM; CLEAVAGE; HYDROGENATION; PHENOLS; ALUMINA; NICKEL; PD in [Guan, Weixiang; Chen, Xiao; Hu, Haoquan; Zhang, Jie; Liang, Changhai] Dalian Univ Technol, Sch Chem Engn, State Key Lab Fine Chem, Lab Adv Mat & Catalyt Engn, Dalian 116024, Peoples R China; [Tsang, Chi-Wing] Technol & Higher Educ Inst Hong Kong, Fac Sci & Technol, 20A Tsing Yi Rd, Hong Kong, Peoples R China; [Lin, Carol Sze Ki] City Univ Hong Kong, Sch Energy & Environm, Kowloon Tong, Hong Kong, Peoples R China in 2020.0, Cited 41.0. The Name is Diphenyl oxide. Through research, I have a further understanding and discovery of 101-84-8. Safety of Diphenyl oxide

The increasing risk of fossil fuels depletion due to surging energy demand has accelerated the search of alternative renewable sources. Lignin, one of the major components of lignocellulosic biomass, is the only abundant renewable natural resource for aromatic compounds. In this work, the effects of metals and process parameters were discussed via the catalytic hydrogenolysis of beta-O-4 lignin model compound, 2-phenethyl phenyl ether. The best results were obtained over Rh/Nb2O5 with an overall conversion of 99.3% and exceptional selectivity of 98.9% to aromatic products when the hydrogenolysis was carried out at 260 degrees C and 0.1 MPa H-2 for 4 h. The high efficiency is mainly attributed to the cooperation between Rh and NbOx at the perimeter sites, in which Rh particles are responsible for the dissociation of H-2 and NbOx for activating CeO bonds. With respect to depolymerize of ash wood lignin, the liquid products were mostly aromatics over Rh/Nb2O5 under 0.1 MPa H-2. The results achieved in this work provide a promising prospect towards valorization of lignin into production of valuable aromatic compounds under low hydrogen pressure.

About Diphenyl oxide, If you have any questions, you can contact Guan, WX; Chen, X; Hu, HQ; Tsang, CW; Zhang, J; Lin, CSK; Liang, CH or concate me.. Safety of Diphenyl oxide

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

COA of Formula: C14H14O. Authors Bilodeau, S; Florek, J; Kleitz, F in WILEY-V C H VERLAG GMBH published article about in [Bilodeau, Simon] Laval Univ, Dept Chem, Quebec City, PQ G1V 0A6, Canada; [Florek, Justyna; Kleitz, Freddy] Univ Vienna, Dept Inorgan Chem Funct Mat, Fac Chem, Wahringer Str 42, A-1090 Vienna, Austria in 2021, Cited 75. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4

Nanocasting is a convenient way for preparing highly porous, nanostructured soft materials. Mesoporous polymer nanocasts have been reported for over a decade, however, several aspects remain to be explored further. To do so, we report a comprehensive investigation of the physicochemical characteristics of high surface area functional organic polymers and copolymers obtained by nanocasting. Divinylbenzene, styrene and chloromethyl styrene were selectively polymerized within the pores of mesoporous SBA-15 or KIT-6 silicas. Following template removal, the resulting materials were characterized. The nanocast mesoporous polymers were also modified to introduce functional groups. The success of the functionalization was assessed analytically and by model catalytic tests. The study points to the advantages of the hard templating method for structuring organic materials but also its limitations.

About Benzyl ether, If you have any questions, you can contact Bilodeau, S; Florek, J; Kleitz, F or concate me.. COA of Formula: C14H14O

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Recommanded Product: 101-84-8. In 2020.0 RUSS J PHYS CHEM A+ published article about BINARY-MIXTURES; DENSITY in [Yakovlev, I. G.; Garkushin, I. K.; Kolyado, A., V] Samara State Tech Univ, Samara 443001, Russia in 2020.0, Cited 19.0. The Name is Diphenyl oxide. Through research, I have a further understanding and discovery of 101-84-8.

A theoretical and experimental study is performed for liquid-solid phase equilibria in the two-component diphenyl oxide-n-hexadecane system. The results show that this system is eutectic. Two means are chosen for the theoretical study of the system: the Schroder-Le Chatelier equations and the original UNIFAC system. Experimental studies are made via differential thermal analysis on a DSC unit. Results from the theoretical and experimental studies are presented in the formT-xdiagrams of the system. The theoretical and experimental data are compared to one another. Each way of calculating is assessed, and recommendations are made for their application. The eutectic coordinates (melting point and composition) are determined experimentally. The following values are determined experimentally for a eutectic melt: the enthalpy of melting; density at 25 degrees C; kinematic viscosity in the temperature range of 25 to 50 degrees C; flash point in an open cup; boiling point, and refractive index in the temperature range of 25 to 40 degrees C. The composition of the eutectic melt can be used in industry as a heat transfer fluid.

Recommanded Product: 101-84-8. About Diphenyl oxide, If you have any questions, you can contact Yakovlev, IG; Garkushin, IK; Kolyado, AV or concate me.

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

Formula: C12H10O. Authors Zhao, LX; Shi, XH; Cheng, JH in AMER CHEMICAL SOC published article about in [Zhao, Lanxiao; Shi, Xianghui; Cheng, Jianhua] Chinese Acad Sci, Changchun Inst Appl Chem, State Key Lab Polymer Phys & Chem, Changchun 130022, Peoples R China; [Zhao, Lanxiao; Cheng, Jianhua] Univ Sci & Technol China, Hefei 230029, Anhui, Peoples R China in 2021.0, Cited 58.0. The Name is Diphenyl oxide. Through research, I have a further understanding and discovery of 101-84-8

The catalytic regioselective C-H silylation of a wide range of alkoxy-substituted benzene derivatives with primary hydrosilane was achieved by the use of scorpionate-supported calcium benzyl complex [(Tp(Ad,iPr))Ca(p-CH2C6H4Me)(THP)] (1) (Tp(Ad,iPr) = hydrotris(3-adamantyl-5-isopropylpyrazolyl)borate, THP = tetrahydropyran) as the precatalyst. This protocol offers an atom-efficient and straightforward method for the synthesis of a variety of silyl-substituted aromatic ether derivatives without a hydrogen acceptor and free of transition metal. Calcium anisyl complexes [(Tp(Ad,iPr))Ca(o-MeO-m-Br-C6H3)] (5) and [(Tp(Ad,iPr))Ca(o-Me-OCH2C6H4)] (6), proposed as the catalytic reaction intermediates, were isolated and structurally characterized.

About Diphenyl oxide, If you have any questions, you can contact Zhao, LX; Shi, XH; Cheng, JH or concate me.. Formula: C12H10O

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem

An article Template free synthesis of hierarchical porous zeolite Beta with natural kaolin clay as alumina source WOS:000504505500009 published article about SURFACE ACID PROPERTIES; ESTERIFICATION; CATALYSTS; CREATION; PERFORMANCE; CRYSTALS; ETHANOL in [Yue, Yuanyuan; Guo, Xiaoxue; Liu, Tao; Wang, Tinghai; Yuan, Pei; Zhu, Haibo; Bai, Zhengshuai; Bao, Xiaojun] Fuzhou Univ, Coll Chem Engn, Fuzhou 350002, Fujian, Peoples R China; [Liu, Haiyan] China Univ Petr, State Key Lab Heavy Oil Proc, Beijing 102249, Peoples R China in 2020, Cited 36. The Name is Benzyl ether. Through research, I have a further understanding and discovery of 103-50-4. SDS of cas: 103-50-4

A template free synthesis route was developed for the synthesis of hierarchical zeolite Beta from a natural layered aluminosilicate mineral kaolin. Detailed study on the crystallization of zeolite Beta established the optimized synthesis condition, and the synthesized hierarchical Beta zeolite was fully studied by XRD, IR, SEM, TEM, BET, NH3-TPD, Py-IR and NMR techniques. The characterization results reveal that the hierarchical Beta zeolite possesses good crystallinity, bimodal pore architecture, large surface area, big pore volume, high acid site concentration and excellent hydrothermal stability. An improved catalytic performance was achieved in hierarchical Beta zeolite for the esterification of acetic acid with benzyl alcohol, and the high activity and selectivity in this zeolite are mainly attributed to the presence of mesopores for accelerating the intraparticle diffusion rate of both reactant and product. This novel synthesis methodology provides a low-cost and environmentally-benign way for the preparation of hierarchical Beta zeolite, which could serve a sustainable platform of large-scale production of hierarchical zeolite for practical application.

About Benzyl ether, If you have any questions, you can contact Yue, YY; Guo, XX; Liu, T; Liu, HY; Wang, TH; Yuan, P; Zhu, HB; Bai, ZS; Bao, XJ or concate me.. SDS of cas: 103-50-4

Reference:
Ether – Wikipedia,
,Ether | (C2H5)2O – PubChem