Category: ethers-buliding-blocks

Reference of 349-65-5, These common heterocyclic compound, 349-65-5, name is 2-Methoxy-5-(trifluoromethyl)aniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 2-methoxy-5-(trifluoromethyl)aniline (0.15 g) in anh CH2Cl2 (15 mL) at 0 C. was added CDl (0.13 g). The resulting solution was allowed to warm to room temp. over 1 h, was stirred at room temp. for 16 h, then was treated with 4-(2-(N-methylcarbamoyl)-4-pyridyloxy)aniline (0.18 g). The resulting yellow solution was stirred at room temp. for 72 h, then was treated with H2O (125 mL). The resulting aqueous mixture was extracted with EtOAc (2*150 mL). The combined organics were washed with a saturated NaCl solution (100 mL), dried (MgSO4) and concentrated under reduced pressure. The residue was triturated (90% EtOAc/10% hexane). The resulting white solids were collected by filtration and washed with EtOAc. The filtrate was concentrated under reduced pressure and the residual oil purified by column chromatography (gradient from 33% EtOAc/67% hexane to 50% EtOAc/50% hexane to 100% EtOAc) to give N-(2-methoxy-5-(trifluoromethyl)phenyl)-N’-(4-(2-(N-methylcarbamoyl)-4-pyridyloxy)phenyl) urea as a light tan solid (0.098 g, 30%): TLC (100% EtOAc) Rf 0.62; 1H NMR (DMSO-d6) delta 2.76 (d, J=4.8 Hz, 3H), 3.96 (s, 3H), 7.1-7.6 and 8.4-8.6 (m, 11H), 8.75 (d, J=4.8 Hz, 1H), 9.55 (s, 1H); FAB-MS m/z 461 ((M+H)+).

Statistics shows that 2-Methoxy-5-(trifluoromethyl)aniline is playing an increasingly important role. we look forward to future research findings about 349-65-5.

Reference:
Patent; Riedl, Bernd; Dumas, Jacques; Khire, Uday; Lowinger, Timothy B.; Scott, William J.; Smith, Roger A.; Wood, Jill E.; Monahan, Mary-Katherine; Natero, Reina; Renick, Joel; Sibley, Robert N.; US2001/11135; (2001); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Some common heterocyclic compound, 2393-23-9, name is 4-Methoxybenzylamine, molecular formula is C8H11NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 4-Methoxybenzylamine

1.1. Synthesis of bis-(4-methoxy-benzyl)-amine (Int. 1) p-Anisaldehyde (411 mmol), 4-methoxybenzylamine (411 mmol) and toluene (500 mL) were combined in a round bottomed flask fitted with a condenser and a Dean-Stark trap. The reaction was refluxed for 1 h during which water was removed from the reaction mixture. The reaction was cooled and concentrated. The residue was dissolved in MeOH (120 mL). The mixture was cooled to 5 C. and NaBH4 (205 mmol) was added in portions over 45 min. The reaction was slowly heated to reflux. After 2 h at reflux, the reaction was cooled to room temperature and concentrated. The residue was dissolved in EtOAc. The organic layer was washed (3*H2O and brine), dried (Na2SO4) and concentrated to yield the desired product.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2393-23-9, its application will become more common.

Reference:
Patent; MENET, Christel Jeanne Marie; MAMMOLITI, Oscar; BLANC, Javier; ORSULIC, Mislav; ROSCIC, Maja; US2015/203455; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 59557-91-4, name is 4-Bromo-2-methoxyaniline, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 59557-91-4

Intermediate 10 4-Bromo-2-methoxy-N /V-dimethylaniline [00406] Formaldehyde (3.7 mL, 49 mmol, 37% aqueous) and acetic acid (57 uL, 1 mmol) were added to a solution of 4-bromo-2-methoxyaniline (2.0 g, 9.9 mmol) in methanol (10 mL) at 25 C. The mixture was stirred for 2 h, and then sodium cyanoborohydride (3.11 g, 49.5 mmol) was added in portions. The resulting mixture was stirred for 12 h, poured into a saturated NaHC03 solution (40 mL), and then extracted with ethyl acetate (3 x20 mL). The combined organic phases were washed with brine (2×20 mL), dried over anhydrous Na2S04, filtered and concentrated. The residue was purified by column chromatography (Si02, petroleum ether/ethyl acetate; 15/1) to give 4-bromo-2-methoxy-N,N-dimethylaniline (2.0 g, 80%) as a brown oil. 1H MR (CDC13): delta 7.02 (dd, 1H), 6.95 (d, 1H), 6.78 (d, 1H), 3.87 (s, 3H), 2.76 (s, 6H); MS: 230.0 [M+H]+.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 59557-91-4.

Reference:
Patent; METACRINE, INC.; SMITH, Nicholas D.; GOVEK, Steven P.; NAGASAWA, Johnny Y.; (228 pag.)WO2017/49172; (2017); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 22094-18-4, name is 1,3-Dibromo-2,2-dimethoxypropane, This compound has unique chemical properties. The synthetic route is as follows., category: ethers-buliding-blocks

To a suspension of NaH (120 g , 3.0 mol) in DMF (1 L) was added dropwise diisopropyl malonate (507 g, 2.7 mol) under an Ar atmosphere, and the reactionwas stirred.Compound 29.2(360 g, 1.35 mol) was then added in portionsand the mixturewas heated to reflux for 48 hr.The reaction mixture was poured into water (2 L), and extracted with PE (6 x 1 L). The combinedorganic layers were dried, filteredand concentrated under reduced pressure 15 to give a yellow oil, which was purified by distillation under reduced pressureto yield compound 29.3 (150 g, 45%) as a colorless oil.

According to the analysis of related databases, 22094-18-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ACHAOGEN, INC.; LINSELL, Martin Sheringham; AGGEN, James Bradley; DOZZO, Paola; HILDEBRANDT, Darin James; COHEN, Frederick; KASAR, Ramesh Annasaheb; KANE, Timothy Robert; GLIEDT, Micah James; MCENROE, Glenn A.; WO2014/165075; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 450-88-4, name is 1-Bromo-4-fluoro-2-methoxybenzene, A new synthetic method of this compound is introduced below., SDS of cas: 450-88-4

To a mixture of magnesium (0.79 g, 32.5 mmol) and lithium chloride (1.52 g, 35.80 mmol) in THF (33 ml) at room temperature was added 1-bromo-4-fluoro-2-methoxybenzene (3.13 mL, 24.39 mmol) and the reaction was stirred at 70 C for 1.5 hr. The reaction was then cooled to 0 C, and Fe(acac)3 (0.574 g, 1.63 mmol) was added. After 1 minute, allyl chloride (1.33 mL, 16.26 mmol) was added and the reaction was stirred at 0 C for 30 min. The mixture was warmed to room temperature over 1 hr and was heated at 70 C overnight. The reaction was cooled and diluted with petroleum ether (100 mL). The reaction was then quenched by the addition of a saturated NH4Cl solution (100 mL). The mixture was filtered through a Celite pad and the layers were separated. The aqueous layer was extracted with petroleum ether (2 x 100 mL) and the combined organic phases were dried over Na2SO4 and carefully concentrated (25 C, 250 mbar). The residue was purified by Isco chromatography (100% pet ether as the eleuent) to provide (E,Z)-4-fluoro-2- methoxy-1-(prop-1-en-1-yl)benzene (2.25 g, 83 % yield) as a colorless oil. This mixture was approximately a 3:1 mixture of E and Z isomers with a trace of the allyl isomer present. This material was used directly in the next step.1H NMR (400 MHz, CDCl3) delta 7.31 (dd, J = 8.3, 6.8 Hz, 1H), 6.65- 6.53 (m, 3H), 6.14 (dq, J = 15.8, 6.6 Hz, 1H), 3.82 (s, 3H), 1.88 (dd, J = 6.6, 1.7 Hz, 3H).19F NMR (376 MHz, CDCl3) delta -113.30.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; DOW AGROSCIENCES LLC; BUCHAN, Zachary A.; LU, Yu; JONES, David M.; MEYER, Kevin G.; YAO, Chenglin; (110 pag.)WO2018/44996; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 22236-10-8, name is 4-(Difluoromethoxy)aniline, A new synthetic method of this compound is introduced below., SDS of cas: 22236-10-8

Preparation 9 6-Chloro-N*4*-(4-difluoromethoxyphenyl)-2-methylpyrimidine-4,5-diamine; 4,6-dichloro-2-methyl-pyrimidin-5-ylamine (20.0 g, 110 MoI) was added with stirring to EtOH (80 mL) over 3 minutes to give complete solution. 4-Difluoromethyoxyaniline (18.8 g, 118 MoI) was then added with stirring over 3 minutes. A dark brown solution was observed. EtOH (20 mL) was then added followed by a premixed solution of c.HCI (10 mL) in EtOH (40 mL) at a steady rate over 20 minutes. A slight exotherm up to approx 2O0C was noted. The solution was then warmed to 850C and held at that temperature for 4 hours. The reaction mixture was then cooled to room temperature, and a beige solid precipitated. This reaction mixture was filtered then washed with EtOH (100 ml_) followed by MTBE (3OmL) to remove EtOH traces. The resultant solid was dried in vacuo over the weekend to give the title compound, as the hydrochloride salt, as a beige solid (17.2 g, 45%) 1H NMR (400MHz, CD3OD) delta = 2.55 (s, 3H), 6.89 (t, 1 H), 7.27 (d, 2H), 7.75 (d, 2H) LCMS (System 4) 3.07 mins; m/z (APCI) = 301 [MH+]

The synthetic route of 22236-10-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PFIZER LIMITED; WO2009/144632; (2009); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 393-15-7,Some common heterocyclic compound, 393-15-7, name is 4-Methoxy-3-(trifluoromethyl)aniline, molecular formula is C8H8F3NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4-Methoxy-3-trifluoromethyl-phenylamine (5 g, 26 mmol) in 12 mL water was cooled to -5 degrees C. (Ice/Methanol bath). Conc. HCl was added dropwise (7 ml), and the reaction mixture was stirred for five minutes. A solution of NaNO2 (2.0 g, 29 mmol) dissolved in 3 ml water was added dropwise over 10 minutes, and the reaction mixture was stirred for 30 min. Sodium acetate (1.8 g, 22 mmol) was then added, and stirring was continued at -5 degrees C. In a separate flask, ethyl alpha-acetoacetate (4.55 g, 29 mmol) in 20 ml absolute ethanol was stirred, and KOH (1.6 g, 29 mmol) dissolved in 3 ml water was added, followed by ice (30 g). The resulting diazonium salt was added quickly to the reaction mixture, rinsing in with 5 ml EtOH, and the reaction mixture was stirred at zero degrees C. for 3.5 hours, then stored at -10 C) for 16 hours. The reaction mixture was warmed to room temperature and extracted with ethyl acetate, washed with brine, and dried over magnesium sulfate. Solvent was removed under reduced pressure to leave a liquid residue. In a separate flask 100 ml EtOH and 21 ml acetyl chloride were mixed, with cooling in an ice bath, then heated to 70 degrees C. The liquid residue was added via pipette over 15 minutes to the acetyl chloride solution. This reaction mixture was heated to reflux for 2.5 hours, cooled, evaporated under reduced pressure. The residue was purified by column chromatography (10% ethyl acetate/hexane) to give 3.0 g 5-Methoxy-3-methyl-6-trifluoromethyl-1H-indole-2-carboxylic acid ethyl ester, 38% as a white solid and triturated with diethyl ether to give 5-Methoxy-3-methyl-6-trifluoromethyl-1H-indole-2-carboxylic acid ethyl ester (1.0 g) as a white solid, and 5-Methoxy-3-methyl-4-trifluoromethyl-1H-indole-2-carboxylic acid ethyl ester (14%) as a white solid.

The synthetic route of 393-15-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Roche Palo Alto LLC; US2007/49609; (2007); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

102-52-3, name is 1,1,3,3-Tetramethoxypropane, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: ethers-buliding-blocks

Stage 5- Preparation of 3-(phenylamino)allylidene)aniline hydrochloride (Bioorg. Med. Chem. 2006, 4, 92-97). Compound having formula (VI) where n=1. 24.7 g of aniline in solution in 300 mL of 0.75 N HCl is added drop by drop to 21.8 g of 1,1,3,3-tetramethoxypropane in solution in 300 mL of 0.75 N HCl. The appearance of an intense orange colour and the precipitation of an orange crystalline solid are observed. The medium is then left under stirring for 3 hours at 50 C. The cooled medium is filtered, vacuum-dried to obtain 15.2 g of orange solid (Yd=44.2%). C15H14N2, HCl-(Mass ESI+400 C. MH+=223.1).

The synthetic route of 102-52-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE (CNRS); PIERRE FABRE MEDICAMENT; Guminski, Yves; Imbert, Thierry; Pesnel, Sabrina; Pillon, Arnaud; Le Pape, Alain; Lerondel, Stephanie; US2013/183247; (2013); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 887581-09-1, name is (2-Bromo-5-methoxyphenyl)methanamine, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 887581-09-1, Application In Synthesis of (2-Bromo-5-methoxyphenyl)methanamine

General procedure: A 25 mL Schlenk tube wascharged with a magnetic stirrer and DMSO (2.0 mL). Substituted(2-bromophenyl)methylamine (1) (0.5 mmol), amidine hydrochloride (2) (1.0 mmol),CuBr (0.1 mmol, 14.2 mg), and K2CO3 (1.5 mmol, 207 mg) were added to the tube.The mixture was stirred at 80-120 oC under nitrogen atmosphere for 24 h, and thenunder air for 0.5 h. The resulting mixture was cooled to room temperature and filtered,and the solid was washed with ethyl acetate for two times (3 × 3 mL). The combinedfiltrate was concentrated by the rotary evaporator, and the residue was purified bycolumn chromatography on silica gel using petroleum ether/ ethyl acetate as eluent togive the desired target product.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (2-Bromo-5-methoxyphenyl)methanamine, and friends who are interested can also refer to it.

Reference:
Article; Liu, Qing; Zhao, Yufen; Fu, Hua; Cheng, Changmei; Synlett; vol. 24; 16; (2013); p. 2089 – 2094;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 36805-97-7,Some common heterocyclic compound, 36805-97-7, name is 1,1-Di-tert-butoxy-N,N-dimethylmethanamine, molecular formula is C11H25NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

4-Hydroxy phenyl acetic acid-t-butyl ester (Reagent E) A stirred suspension of 4-hydroxy-phenyl acetic acid (0.152 g, 1 mmol) in anhydrous toluene (5 mL) was heated at 80 C. and N,N-dimethyl formamide-di-t-butyl acetal (1 mL, 4.17 mmol) was added when the solution became homogenous. After 0.5 h, the reaction mixture was cooled to ambient temperature and the volatiles were distilled off in vacuo. The residue was diluted with water and extracted with diethyl ether (*2). The combined organic extract was dried over anhydrous sodium sulfate, filtered and evaporated in vacuo to afford an oil which was subjected to flash column chromatography over silica gel (230-400 mesh) using 16% ethyl acetate in hexane as the eluent to afford the title compound as a solid (0.11 g, 56%). 1H-NMR (300 MHz, CDCl3): delta1.44(s, 9H), 3.45(s, 2H), 6.55(s, 1H), 6.69(d, J=8.8 Hz, 2H), 7.06(d, J=8.5 Hz, 2H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1,1-Di-tert-butoxy-N,N-dimethylmethanamine, its application will become more common.

Reference:
Patent; Allergan Sales, Inc.; US6313107; (2001); B1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem