Category: ethers-buliding-blocks

22236-08-4, name is 3-(Difluoromethoxy)aniline, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. SDS of cas: 22236-08-4

To a solution of 3- (difluoromethoxy) aniline (318 mg, 2.0 iranol) and pyridine (633 mg, 8.0 iranol) in N-methylpyrrolidone (2 mL) was added phenyl chloroformate (251 muL, 2.0 mmol) under ice-cooling, and the mixture was stirred at room temperature for 2 hr. 2-chloro-4- [ (5-methyl-5H-pyrrolo [3, 2-d]pyrimidin-4- yl) oxy] aniline (275 mg, 1.0 mmol) was added to the reaction mixture, and the mixture was stirred at 800C for 8 hr. The reaction mixture was diluted with water, basified with IN aqueous sodium hydroxide solution and extracted with ethyl acetate. The organic layer was washed with water and saturated brine, and concentrated under reduced pressure. The residue was purified by NH silica gel column chromatography (hexane/ethyl acetate=80/20->0/100) , and then silica gel column chromatography (hexane/ethyl acetate=80/20-»0/100) and recrystallized from diisopropyl ether to give the title compound (229 mg, 50%) as a white solid. 1H-NMR (DMSO-de, 300 MHz) delta 4.11 (3H, s) , 6.61 (IH, d, J = 3.0 Hz), 6.81 (IH, dd, J = 8.0, 2.1 Hz), 7.19 – 7.23 (IH, m) , 7.22 (IH, t, J = 74.1 Hz), 7.31 (IH, dd, J = 9.0, 2.7 Hz), 7.35 (IH, t, J = 8.0 Hz), 7.49 (IH, t, J = 2.1 Hz), 7.56 (IH, d, J = 2.7 Hz), 7.80 (IH, d, J = 3.0 Hz), 8.17 (IH, d, J = 9.0 Hz), 8.30 (IH, s), 8.43 (IH, br s) , 9.60 (IH, br s) .

The synthetic route of 22236-08-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; WO2007/4749; (2007); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Some common heterocyclic compound, 19500-02-8, name is 3-Methoxy-2-methylaniline, molecular formula is C8H11NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 19500-02-8

2-Methoxy-4-bromotoluene; Crude 2-methoxy-6-amino-toluene (max. 120 mmol) was suspended in HBr (48%, 48 ml) and water (120 ml) and cooled to 0C in an ice bath. Sodium nitrite (9.2 g) in water (24 ml) was added dropwise to the cold mixture, which turned yellow then brown. After 10 min, excess nitrite was destroyed by addition of urea (0.08 g) and the mixture was rapidly filtered into cold (0C) acetone (480 ml) to give a bright yellow solution. CuBr (99.999%, 18.89,131 mmol) was then added portionwise and the resulting mixture stirred at 0C for 3h. Gas evolution was observed. The mixture was allowed to warm to ambient temperature, and then concentrated in vacuo. Dichloromethane was then added and the mixture washed with sat. aq. sodium bicarbonate solution. The organic layer was separated, dried over magnesium sulphate and concentrated in vacuo to give the product (23.1 g, 96%) as a red oil. No.H (CDCl3; 250MHz) 7.18-6.77 (3H, m, aromatics), 3.83 (3H, s, OCH3), 2.32 (3H, s, CH3).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 19500-02-8, its application will become more common.

Reference:
Patent; ARAKIS LTD.; WO2005/103019; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2752-17-2 as follows. Product Details of 2752-17-2

5LlO-l,2-HOPOBn; To a solution of l ,2-HOPO(Bn)-thiazolide (644 mg, 2.1 mmol) in dry methylene chloride (20 mL), was added neat 5LIO-amine ( 104 mg, 1.0 mmol). The mixture was stirred overnight, after which time the solvent was removed and the residue was loaded onto a flash silica column. Elution with 2-6% methanol in methylene chloride allowed for the separation and isolation of the benzyl-protected 5L1O- 1 , 2-HOPO(Bn) to give a pale yellow oil (447 mg. 85 % based on amine). [0251] 1 H NMR (500MHz, CDCl3): delta 3.22(s, 8H, CH2), 5.24(s, 4H, benzyl CH2), 6.26(dd, J= I, .2 Hz, 2H, HOPO H), 6.3 l (d, 2H, J = 9.0 Hz, HOPO H), 7.24(dd, 2H, J= 9.0, 2 Hz, ArH), 7.26-7.45(m, 12H, ArH), 7.74(s,br, 2H, amideH). 1 3C NMR ( 125 MHz, CDCI3): delta 38.8, 68.1 , 78.2, 104.7, 121.7, 127.7, 128.3, 129.0, 132.9, 138.3, 143.2, 157.8, 160.0. MS(FAB+): 559.2 (MH ‘).

According to the analysis of related databases, 2752-17-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF CALIFORNIA; WO2008/8797; (2008); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 27060-75-9,Some common heterocyclic compound, 27060-75-9, name is 1-Bromo-4-methoxy-2-methylbenzene, molecular formula is C8H9BrO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Preparation process: Select a 100ml round bottom flask, add substrate 4-1 (1eq.),Tetrakis (triphenylphosphine) palladium (5%) and solvent ethylene glycol dimethyl ether to water 2: 1 (0.1M), after stirring at room temperature for twenty minutes,Add 2,4,6-trimethylphenylboronic acid (1.1 eq.) And sodium carbonate (3 eq.) And heat to 90 C for 36 h under reflux.Cool to room temperature, extract 3 times with ethyl acetate, collect the organic phase, dry over anhydrous sodium sulfate, spin-dry column chromatography, and use petroleum ether to ethyl acetate 40: 1 as eluent.A pale yellow solid was obtained with a yield of 86%.

The synthetic route of 27060-75-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Nanjing Jianuolin Optoelectric Technology Co., Ltd.; Hang Xiaochun; Yin Junli; Liu Ruqing; (57 pag.)CN110615787; (2019); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 2216-69-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2216-69-5, name is 1-Methoxynaphthalene belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To the solution of anisole (0.50 g, 4.6 mmol), TBAB (0.75 g, 2.3 mmol), KBr (0.83 g, 6.9 mmol), ethyl acetate (3.0 mL) and water (0.050 g, 2.8 mmol) were added and stirred at room temperature. A solution of BTC (1.78 g, 6.0 mmol) in ethyl acetate (6.0 mL) was dropwised to the reaction mixture. After the reaction finished, the reaction mixture was washed with water (10 mL × 2) and evaporated. The product was obtained with 99% purity by HPLC. 1 H NMR (400 MHz, DMSO-d6, ppm): delta 7.46-7.42 (m, 2H), 6.78-6.76 (m, 2H), 3.74 (s, 3H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Methoxynaphthalene, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Xu, Yingzhou; Hu, Dufen; Zheng, Hui; Mei, David; Gao, Zhaobo; Tetrahedron; vol. 75; 39; (2019);,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 707-07-3, name is (Trimethoxymethyl)benzene, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 707-07-3, name: (Trimethoxymethyl)benzene

A mixture of methyl 1-acetyl-oxindole-6-carboxylate of formula 3 (7.00 g), toluene (20 ml) and acetanhydride (9.8 ml) was stirred in a flask equipped with a small Vigreux column and adistillation adapter at 110C for 5 mm, producing a turbid orange-red solution. At the temperature of 110C, trimethyl orthobenzoate (12.4 ml) was added dropwise to the reaction mixture, followed by toluene (16 ml), by means of a syringe fitted with a needle reaching into the flask. The bath temperature was slowly increased to slowly distil the produced methyl acetate. After distilling for 4 h, the bath temperature was 125C and the distillate volume was6.5 ml. The reaction mixture was left to stand at 20C for 4 h and the crystallization of the product was completed in 2 h at 10C. The product was filtered off, washed with toluene and finally with a mixture of toluene and ethyl acetate (1: 1). The yield was 8.94 g (85%) of a beige powder

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (Trimethoxymethyl)benzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ZENTIVA, K.S.; MECA, Ludek; (16 pag.)WO2017/16530; (2017); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 1462-37-9, The chemical industry reduces the impact on the environment during synthesis 1462-37-9, name is ((2-Bromoethoxy)methyl)benzene, I believe this compound will play a more active role in future production and life.

Methyl 1-(2-(benzyloxy)ethyl)-2-(2-(benzyloxy)pyridin-3-yl)-3-cyclohexyl-1H-indole-6-carboxylate To a suspension of NaH (14 mg of 60percent dispersion in mineral oil, 0.354 mmol) in DMF (2 mL), methyl 2-(2-(benzyloxy)pyridin-3-yl)-3-cyclohexyl-1H-indole-6-carboxylate (130 mg, 0.295 mmol) was added and the reaction mixture was stirred at rt for 15 min. Benzyl 2-bromoethyl ether (0.052 mL, 0.325 mmol) was then added, and the reaction mixture was stirred at rt overnight before being quenched by the addition of water. The resultant mixture was extracted with ethyl acetate (2*20 mL) and the organic layers were combined, washed with 1N HCl solution, and then dried (MgSO4), filtered and concentrated under vacuum. The residue was then purified by Prep. reverse phase HPLC to give the title compound as light yellow solid (83.5 mg, 49percent yield). MS m/z 575(MH+); 1H NMR (500 MHz, CDCl3) delta ppm 1.21-1.31 (m, 3 H) 1.69-1.90 (m, 7 H) 2.53 (m, 1 H) 3.65 (m, 1 H) 3.72 (m, 1 H) 3.92 (s, 3 H) 4.17 (m, 1 H) 4.27 (m, 1 H) 4.32 (s, 2 H) 5.21 (s, 2 H) 6.18 (t, J=6.87 Hz, 1 H) 7.07-7.12 (m, 2 H) 7.21-7.36 (m, 9 H) 7.41 (dd, J=6.71, 2.14 Hz, 1 H) 7.74 (dd, J=8.54, 1.22 Hz 1 H) 7.78 (m, J=8.55 Hz, 1 H) 8.12 (s, 1 H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, ((2-Bromoethoxy)methyl)benzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Hudyma, Thomas W.; Zheng, Xiaofan; He, Feng; Ding, Min; Bergstrom, Carl P.; Hewawasam, Piyasena; Martin, Scott W.; Gentles, Robert G.; US2006/46983; (2006); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 929-75-9, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 929-75-9 as follows.

General procedure: The diamine 10 (1 equiv) in DCM solution (10 mL / mmol) was treated with Boc2O in default (0.15 equiv) for 5 h at 0 C and 18 h at room temperature. The organic phase was washed with water, until all the unreacted 10 was extracted. The Boc-protected compound 11 was quantitatively recovered after drying (MgSO4) and concentration under vacuum. 11a: 1H NMR (300 MHz, CDCl3): d 1.45 (s, 9H), 1.80 (br m, 2H, NH2), 3.25 (m, 2H), 3.38 (m, 2H), 3.50-3.70 (m, 8H), 5.10 (br s, 1H, NHCO2). 11b: 1H NMR (300 MHz, CDCl3): d 1.42 (s, 9H), 1.75 (br m, 2H, NH2), 2.84 (t, 2H, J = 5.3 Hz), 3.29 (m, 2H), 3.51 (m, 4H), 3.58 (sharp m, 8H), 5.30 (br s, 1H, NHCO2).

According to the analysis of related databases, 929-75-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Favre, Annaick; Grugier, Jerome; Brans, Alain; Joris, Bernard; Marchand-Brynaert, Jacqueline; Tetrahedron; vol. 68; 52; (2012); p. 10818 – 10826;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 54149-17-6, name is 1-Bromo-2-(2-methoxyethoxy)ethane, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 54149-17-6, HPLC of Formula: C5H11BrO2

Example 83 Preparation of 17-[2-(2-methoxyethoxy)ethyl]-N-(pyridin-3-yl)morphinan-3-amine (83), hydrochloride salt Step 1 : Preparation of 17-[2-(2-etaiotabeta1iotaomicronchigamma61iotaomicronchinu)61iotagamma1]etaiotaomicronphi1iotaeta3eta-3-gamma1 trifluoromethanesulfonate, The acetonitrile solution of morphinan-3-yl trifluoromethanesulfonate (2.7 g, 7.19 mmol), l-bromo-2-(2-methoxyethoxy)ethane (2.6 g, 14.4 mmol) and cesium carbonate (2.6 g, 43.2 mmol) was heated at 50 C for 18 hours. After cooling the mixture to room temperature, all solvent was removed and the reaction mixture was extracted with dichloromethane twice. The solvent was evaporated and the residue was purified by silica gel chromatography using Biotage with dichloromethane/methanol eluents. 17-[2-(2- Methoxyethoxy)ethyl]morphinan-3-yl trifluoromethanesulfonate was obtained as a light- yellow liquid (2.5 g, 73% yield), MS (EI) for C22H30F3NO5S: 478.2 (MH+).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; NEKTAR THERAPEUTICS; ANAND, Neel; AURRECOECHEA, Natalia; CHENG, Lin; DENG, Bo-liang; O’MAHONY, Donogh; MU, Yongqi; KROGH-JESPERSEN, Erik; (215 pag.)WO2016/182840; (2016); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 80936-82-9,Some common heterocyclic compound, 80936-82-9, name is 4-(Methoxymethyl)aniline, molecular formula is C8H11NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

5.3b (1.1 g, 8.02 mmol, 1.0 equiv) was dissolved in acetone: water (2:1, 9 mL) and cooled toO C. NaHCO3 (1.42 g, 16.86 mmol, 2.1 equiv) and CBZ-Cl (1.78 g, 10.44 mmol, 1.3 equiv) were added and the reaction mixture was stirred at room temperature for 7 hours. The reaction mixture was quenched with water and extracted with EtOAc. The organic layer was washed with brine, dried over sodium sulfate and concentrated to afford a residue. The residue was purified by silica gel column chromatography (2-5 % EtOAc in Hexane) to afford product 5.3c (1.56 g, 72 % yield). 1H NMR (400 MHz, DMSO) 6 9.80 (s, 1H), 7.49-7.38 (m, 6H), 7.23 (t, J= 6.5 Hz, 2H), 5.15 (s, 2H), 4.32 (s, 2H), 3.25 (s, 3H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-(Methoxymethyl)aniline, its application will become more common.

Reference:
Patent; NOVARTIS AG; FU, Jiping; LEE, Patrick; MADERA, Ann Marie; SWEENEY, Zachary Kevin; WO2015/66413; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem