Category: ethers-buliding-blocks

767-91-9, name is 2′-Methoxyphenyl acetylene, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. COA of Formula: C9H8O

General procedure: To the mixture of phenylacetylene (1 mmol), water (3.0 mL),silver perfluorooctanesulfonate (5 mol%) and perfluorooctane sulfonateacid (2 mol%) was added. The mixture was stirred at 100 Cfor 8 h. The solution was extracted with n-hexane (diethyl ether)(3 5 mL), the combined extract was dried with anhydrous MgSO4. The rest of the solution was used for the next cycle of reaction. Theextraction solvent was removed and the crude product was separatedby column chromatography to give the pure sample.

The synthetic route of 767-91-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Dong, Qizhi; Li, Ningbo; Qiu, Renhua; Wang, Jinying; Guo, Cancheng; Xu, Xinhua; Journal of Organometallic Chemistry; vol. 799-800; (2015); p. 122 – 127;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

These common heterocyclic compound, 366-99-4, name is 3-Fluoro-4-methoxyaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: ethers-buliding-blocks

To a stirred light brown solution of 10.0 g (49.6 mmol) 3-Fluoro-4-methoxy aniline in 56 ml DCM was added rapidly a solution of 4.38 g (52 mmol, 1.05 eq.) NaHCO3 in 70 ml of water. To the resulting biphasic mixture was added under vigorous stirring 5.72 ml (74.4 mmol, 1.5 eq.) methyl chloroformate over a period of 30 min. The light brown reaction mixture was stirred for 1.5h at RT. The organic phase was separated and washed twice with a total amount of 50 ml water, and the combined aqueous phases were washed twice with a total amount of 100 ml DCM. The combined organic phases were dried over 2 g Na2SO4 and filtered with suction on a funnel with a fritted disk. The cake was washed in total with 50 ml DCM. The DCM was partially removed under reduced pressure to about 1/3 of its original volume and then 70 ml heptane was added dropwise under stirring within 30 min, whereby the product precipitated. From this suspension, DCM was completely removed under reduced pressure. Finally, the suspension was stirred in an ice bath for 1h, the crystals were filtered off with suction on a funnel with a fritted disk and washed with three 10 ml portions, in total with 30 ml ice cold heptane. The wet off-white crystals were dried at 50°C in vacuo to yield 9.65 g (97.7percent of theory) of the title compound as off-white crystals (m.p. = 96.1-96.5°C) 1H-NMR data (CDCl3, 300 MHz): delta 7.29 (m, 1H), 6.98 (m, 1H,), 6.89 (dd, 1H), 6.44 (br s, 1H), 3.86 (s, 3H), 3.77 (s, 3H). MS m/e (percent): 200 ([M+H]+, 100).

The synthetic route of 3-Fluoro-4-methoxyaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; F. Hoffmann-La Roche AG; EP2011783; (2009); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 89282-70-2, name is 2-Methoxy-2-methylpropan-1-amine, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 89282-70-2, Recommanded Product: 89282-70-2

A mixture of phenyl 5-({trans-4-[(2-chloro-4-fluorophenyl)carbamoyl]cyclohexyl}carbamoyl)-1 H-imidazole-4-carboxylate (150 mg, 0.309 mmol,) and 2-methoxy-2-methylpropan-1 -amine(160 mg, 1.55 mmol, GAS No 89282-70-2) in tetrahydrofuran (4.8 ml) was stirred at 600over night. For work-up, the reaction mixture was concentrated and the residue was purified by flash chromatography (25 g Snap Cartridge, ethyl acetate/ethanol gradient, 0% -> 5% ethanol) to yield the title compound (18.0 mg, 12 yield).[C-MS (Method 6): R = 1 .08 mm; MS (ESIpos) m/z = 494.2 [M+H].1HNMR (400 MHz, DMSO-d6): 6 [ppm] = 13.20-12.45 (m, 1H), 11.43-1 0.70 (m, 1H), 9.52 (s,1H), 8.69-7.89 (m, 1H), 7.82 (s, 1H), 7.65-7.57 (m, 1H), 7.53-7.47 (m, 1H), 7.27-7.18 (m,1H), 3.89-3.66 (m, 1H), 3.37 (d, 2H), 3.15 (s, 3H), 2.48-2.38 (m, 1H), 2.10-1.75 (m, 4H),1.71 -1 .32 (m, 4H), 1.14 (s, 6H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Methoxy-2-methylpropan-1-amine, and friends who are interested can also refer to it.

Reference:
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; EIS, Knut; ACKERMANN, Jens; WAGNER, Sarah; BUCHGRABER, Philipp; SUeLZLE, Detlev; HOLTON, Simon; BENDER, Eckhard; LI, Volkhart; LIU, Ningshu; SIEGEL, Franziska; LIENAU, Philip; BAIRLEIN, Michaela; VON NUSSBAUM, Franz; HERBERT,Simon; KOPPITZ, Marcus; (734 pag.)WO2016/177658; (2016); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 54314-84-0, name is ((3-Bromopropoxy)methyl)benzene, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 54314-84-0, category: ethers-buliding-blocks

Reference Example 9[4-(3-Benzyloxypropoxy)-2-methylphenyl]methanol To a solution of 4-bromo-3-methylphenol (2.5 g) inN,N-dimethylformamide (10 mL) were added cesium carbonate (4.79 g), benzyl 3-bromopropyl ether (2.48 mL) and a catalytic amount of sodium iodide, and the mixture was stirred at room temperature for 60 hours. The reaction mixture was poured into water, and the resulting mixture was extracted with diethyl ether. The organic layer was washed with water, and dried over anhydrous magnesium sulfate. The solvent was removed under reduced pressure to give 4-(3-benzyloxypropoxy)-1-bromo-2-methylbenzene. This material was dissolved in tetrahydrofuran (100 mL). To the solution was added n-butyl lithium (2.46 mol/Ln-hexane solution, 6 mL) at -78°C under an argon atmosphere, and the mixture was stirred for 5 minutes. To the reaction mixture was added N,N-dimethylformamide (2.57 mL), and the mixture was allowed to warm to 0°C and stirred for 1 hour. The reaction mixture was poured into water, and the resulting mixture was extracted with diethyl ether. The organic layer was washed with water and brine successively, and dried over anhydrous magnesium sulfate. The solvent was removed under reduced pressure to give 4-(3-benzyloxypropoxy)-2-methylbenzaldehyde. This material was dissolved in ethanol (40 mL). To the solution was added sodium borohydride (506 mg), and the mixture was stirred at room temperature overnight. To the reaction mixture was added methanol, and the resulting mixture was concentrated under reduced pressure. Water was added to the residue, and the mixture was extracted with diethyl ether. The organic layer was washed with a saturated aqueous sodium hydrogen carbonate solution, and dried over anhydrous magnesium sulfate. The solvent was removed under reduced pressure, and the residue was purified by column chromatography on silica gel (eluent: n-hexane/ethyl acetate = 5/1 – 1.5/1) to give the title compound (3.33 g).1HNMR (CDCl3) delta ppm: 1. 37 (1H, t, J=5.7Hz), 2.0-2.15 (2H, m), 2.36 (3H, s), 3. 66 (2H, t, J=6.2Hz), 4.08 (2H, t, J=6.3Hz), 4.52 (2H, s), 4.63 (2H, d, J=5.7Hz), 6.65-6.8 (2H, m), 7.15-7.4 (6H, m)

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Kissei Pharmaceutical Co., Ltd.; EP1548024; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 1159512-64-7,Some common heterocyclic compound, 1159512-64-7, name is 2-Fluoro-3-(trifluoromethoxy)aniline, molecular formula is C7H5F4NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of (2S,4R)-1-(tert-butoxycarbonyl)-4-fluoropyrrolidine-2-carboxylic acid (1 equiv) in DMF (10 vol) at 0 C. under nitrogen atmosphere was added 2-fluoro-3-(trifluoromethoxy)aniline (1.2 equiv), HBTU (1.5 equiv) and DIPEA (3 equiv). The reaction mixture was stirred at room temperature for 12 h. After completion of the reaction, the reaction mixture was quenched with water. The resulting mixture was extracted with DCM. The organic layer was washed with brine, dried over anhydrous Na2SO4, filtered and then concentrated. The residue was purified by column chromatography on silica gel using DCM/MeOH to give compound 1239.

The synthetic route of 1159512-64-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ACHILLION PHARMACEUTICALS, INC.; WILES, Jason, Allan; PHADKE, Avinash, S.; DESHPANDE, Milind; AGARWAK, Atul; CHEN, Dawei; GADHACHANDA, Venkat, Rao; HASHIMOTO, Akihiro; PAIS, Godwin; WANG, Qiuping; WANG, Xiangzhu; (905 pag.)WO2017/35353; (2017); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2132-62-9 as follows. Formula: C16H14O2

General procedure: A mixture of acetophenone oxime 1a (0.2 mmol), diphenylacetylene 2 (0.24 mmol, 1.2 equiv), [Cp*IrCl2]2 (3 mol%), PivOH (0.06 mmol, 0.3 equiv), Cu(OAc)2. H2O (0.4 mmol, 2 equiv) and MeOH (2 mL) in a 15mL glass vial [sealed with poly(tetrafluoroethylene)(PTFE) cap] was heated at 120 C with vigorous stirring for 24 h. The reaction mixture was cooled to room temperature, diluted with ethyl acetate, and filtered through Celite. The filtrate was concentrated in vacuo and purified by column chromatography on silica gel to give the corresponding product 4.

According to the analysis of related databases, 2132-62-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Lin, Wei; Hu, Xiu-Xiu; Zhuang, Cang-Wei; Wang, Ya-Zhen; Tetrahedron; vol. 75; 22; (2019); p. 3015 – 3023;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 578-57-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 578-57-4, name is 1-Bromo-2-methoxybenzene, This compound has unique chemical properties. The synthetic route is as follows.

In a reaction tube, dissolve palladium complex [Pd] (0.03 mmol) and o-methoxybromobenzene (1.0 mmol) in 3 mL of toluene,extract and ventilate three timesin a CO2atmosphere, and connect a CO2balloonunder normal pressure. The reaction was carried out at 60 C for 8 hours. After the reaction, the reaction mixture was acidified. The reaction solution was concentrated and separated by column chromatography to obtain the corresponding product C8H8O3(yield 91%).

The chemical industry reduces the impact on the environment during synthesis 1-Bromo-2-methoxybenzene. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Shanghai Institute of Technology; Yao Zijian; Chen Jing; (9 pag.)CN110483581; (2019); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 7252-83-7, name is 2-Bromo-1,1-dimethoxyethane, A new synthetic method of this compound is introduced below., COA of Formula: C4H9BrO2

1-(2-Amino-3-chloro-4-hydroxy-phenyl)-ethanone (15.5 g, 83.8 mmol), Cs2CO3 (54.6 g, 167 mmol) and 2-bromo-1,1-dimethoxy-ethane (14.78 mL, 126 mmol) was dissolved in DMF (125 mL) under an atmosphere of nitrogen. The reaction was heated to 65 C. for 6 hours. The reaction was determined to be complete by LC/MS. The reaction was taken up in EtOAc (500 mL) and washed with 5% LiCl(aq) (3*250 mL). Organics were dried over Na2SO4, filtered and solvent removed under reduced pressure. 1-[2-Amino-3-chloro-4-(2,2-dimethoxy-ethoxy)-phenyl]-ethanone (12.99 g, 57%) was isolated by silica gel chromatography as a white solid. LC/MS=274 (M++1)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Gilead Sciences, Inc.; US2011/135599; (2011); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 36805-97-7, name is 1,1-Di-tert-butoxy-N,N-dimethylmethanamine, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 36805-97-7, Formula: C11H25NO2

Tert-butyl 4-bromo-3-hydroxybenzoate To a solution of 4-bromo-3-hydroxybenzoic acid (1.0 g, 4.6 mmol) in toluene (100 mL) was added di-tert-butoxy-N,N-dimethylmethanamine (935 mg, 4.6 mmol). Then the mixture was stirred at 85 C. overnight. The reaction mixture was poured into water (50 mL) and ethyl acetate (50 mL), the organic phase was washed with water (30 mL), dried over anhydrous sodium sulfate, evaporated and purified by column chromatography to give tert-butyl 4-bromo-3-hydroxybenzoate (1.0 g, 79.4%) as a white solid. LRMS (M+H+) m/z: calcd 273.00. found 273.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,1-Di-tert-butoxy-N,N-dimethylmethanamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Constellation Pharmaceuticals, Inc.; Albrecht, Brian K.; Audia, James Edmund; Gagnon, Alexandre; Harmange, Jean-Christophe; Nasveschuk, Christopher G.; US2015/315148; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

These common heterocyclic compound, 588-96-5, name is p-Bromophenetole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C8H9BrO

General procedure: CS127 was prepared using a modified literature procedure [16]. A solution of butyllithium (1. hexane, 0.15 mL) was added to a solution of 4-bromotoluene (8.52 mg, 0.050 mmol) in hexane (15 mL). After stirring for 1 h, N,N’-diisopropylcarbodiimide (6.29 mg, 0.050 mmol) was added dropwise. The solution was stirred for 1 h at room temperature and then the dimer [(FMeppy)2Ir(mu-Cl)]2 (30 mg, 0.025 mmol) was added. The mixture was heated overnight at 70 C. After being cooled to room temperature, the resulting precipitate was collected and washed with diethyl ether. The dried product was obtained as a yellow powder. Yield 65%.

The synthetic route of p-Bromophenetole has been constantly updated, and we look forward to future research findings.

Reference:
Article; Sahin, Cigdem; Goren, Aysen; Varlikli, Canan; Journal of Organometallic Chemistry; vol. 772; (2014); p. 68 – 78;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem