Category: ethers-buliding-blocks

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1836-62-0, name is 2-(2-Methoxyphenoxy)ethylamine, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 1836-62-0

Example 1 Preparation of Carvedilol in Neat Conditions 2-(2-Methoxyphenoxy)ethylamine (III) (4.89 g) was heated to about 100 C., after which 4-(oxiran-2-ylmethoxy)-9H-carbazole (II) (3.31 g) was added portionwise. After approximately 20 minutes, the reaction mixture was cooled to about 70 C., after which water (25 ml) and ethyl acetate (15 ml) were added. The pH of the two-phase mixture was then adjusted to 5 with 2 N hydrochloric acid. The solid that formed, Carvedilol hydrochloride hydrate, is filtered, washed with water (20 ml) followed with ethylacetate (15 ml). The resulting material is reslurried in ethylacetate (50 ml) and water (20 ml) containing 5% Sodium carbonate until the pH reached 7.5. The organic phase was separated and dried over sodium sulfate. The dried solution was concentrated to a turbid solution and cooled overnight to about 4 C. Precipitated carvedilol was isolated by filteration and crystallized from isopropanol.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1836-62-0.

Reference:
Patent; Hildesheim, Jean; Finogueev, Sergey; Aronhime, Judith; Dolitzky, Ben-Zion; Ben-Valid, Shoshana; Kor, Ilan; US2002/143045; (2002); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

These common heterocyclic compound, 5397-31-9, name is 3-((2-Ethylhexyl)oxy)propan-1-amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C11H25NO

c) 19.9 parts of the trisazo dyestuffs of part b) above are suspended in 100 parts of water, 10.0 parts of [DIPROPYLENE] glycol monomethyl ether and 4. [8] parts of sodium acetate. After warming at [96C] for over one hour, 5.9 parts of copper sulphate are added in small portions for over one hour, followed by 20.0 parts of 25% ammonia. The mixture is heated to reflux for 12 hours whereupon a voluminous suspension of the copper complex results. The temperature is allowed to fall to [45C] over 2 hours (while stirring well) and the suspension is slowly reacted with a solution of 13.3 parts of [3-[(2-ETHYLHEXYL) OXY]-1-] propanamine in 70 parts of water and [8.] 3 parts of 30% HCI. The resulting precipitate is stirred a further hour at room temperature, filtered and the residue is washed salt free and dried. A compound of formula wherein R is methoxy, is obtained.

The synthetic route of 3-((2-Ethylhexyl)oxy)propan-1-amine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CLARIANT INTERNATIONAL LTD; WO2003/99937; (2003); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 150-78-7, The chemical industry reduces the impact on the environment during synthesis 150-78-7, name is 1,4-Dimethoxybenzene, I believe this compound will play a more active role in future production and life.

EXAMPLE 61 (+,-)-N-(cis-2-(3,6-dimethoxy-2-fluorophenyl)-cyclopropyl)-N’-(5-chloropyrid-2-yl)-urea To a solution of 1,4-dimethoxybenzene (15.0 g, 0.109 mol) in 300 mL of dry THF was added 2.5M n-butyllithium (45.6 mL, 0.114 mol) at room temperature under nitrogen. After addition was complete, the solution was stirred for 1 hr. The mixture was cooled to -70 C. and N-fluorobenzenesulfonimide (36.0 g, 0.114 mol) in 150 mL of THF was added slowly, keeping the temperature below -60 C. The solution was allowed to warm to room temperature during the night. 100 mL of NH4 Cl (sat) was added and the mixture was extracted with diethyl ether/THF. The organic phase was washed with 1M NaOH (2*60 mL), dried over MgSO4 and evaporated. Column chromatography (silica gel, n-hexane followed by 1, 5 and 10% EtOAc in n-hexane) provided 11.43 g of a mixture of 1,4-dimethoxy-2-fluorobenzene and 1,4-dimethoxybenzene (4.3:1). This mixture was reacted in a manner analogous to Examples 362, 375 and 348 of WO 93/03022 to give (+,-)-cis-2-(3,6-dimethoxy2-fluorophenyl) cyclopropylamine.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,4-Dimethoxybenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Medivir AB; US5849769; (1998); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 36865-41-5 as follows. Product Details of 36865-41-5

3-hydroxy-4-methoxybenzaldehyde (15 g, 98.6 mmol) was dissolved in acetonitrile (200 mL). 1-Methoxy-3-bromopropane (16.6 g, 108 mmol) and potassium carbonate (34 g, 247 mmol) were added and the mixture was brought to reflux and stirred for 3 hrs. After cooling to room temperature, water and ethyl acetate were added. The aqueous layer was extracted three times with ethyl acetate. The combined organic layers were dried over anhydrous sodium sulfate, filtered and evaporated under reduced pressure to yield 22 g (quantitative yield) of the desired product as a yellow oil, used without further purification.

According to the analysis of related databases, 36865-41-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; SANOFI-AVENTIS; US2009/203696; (2009); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 74654-07-2, name is 2-(2-(2-Methoxyethoxy)ethoxy)ethanamine, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 74654-07-2, Recommanded Product: 2-(2-(2-Methoxyethoxy)ethoxy)ethanamine

To a 20 L flask under nitrogen was added 2-(2-(2-methoxyethoxy)ethoxy)ethanamine (890 g, 5.45 mol) and DCM (3.5 L). This was followed by the addition of 8% aq NaHCO3 (9 L). The acid chloride (1373 g active, 4.89 mol) was then added to the mixture while maintaining the temperature below 25 C. [EXOTHERM and GAS EVOLUTION]. The mixture was stirred for 30 mins, after which LC indicated complete reaction. The organics were separated and washed with 1 M HCl (4.5 L) and 8% aq NaHCO3 (4.5 L), before being dried, filtered and concentrated in vacuo to give a total of 1956 g of the sub-title compound (95% yield). Analysis by 1H NMR indicated a product purity of >95%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(2-(2-Methoxyethoxy)ethoxy)ethanamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Topivert Pharma Limited; Respivert Limited; BAKER, Thomas Matthew; FYFE, Matthew Colin Thor; HARBOTTLE, Gareth William; HASIMBEGOVIC, Vedran; MEGHANI, Premji; RIGBY, Aaron; SAMBROOK-SMITH, Colin; THOM, Stephen Malcolm; US2014/296208; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 35822-58-3, name is 2-Bromobenzaldehyde diethyl acetal, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 35822-58-3, Quality Control of 2-Bromobenzaldehyde diethyl acetal

EXAMPLE 2 2-(Diethoxymethyl)-alpha-(2-fluorophenyl)-benzenemethanol A solution of 345 g of 2-bromobenzaldehyde diethyl acetal in 3 l of dry tetrahydofuran was cooled to -40 C. In one portion, 913 ml of a 1.6 M solution of butyllithium in hexane were added under vigorous stirring. The resulting solution was stirred for 0.5 h at -25 C., after which a solution of 140 ml of 2-fluorobenzaldehyde in 350 ml tetrahydrofuran was added drop-wise. In a period of 4 h, the mixture was allowed to reach room temperature. The resulting mixture was pored upon ice-water and extracted several times with ethyl acetate. The organic layers were combined, washed with water, dried over magnesium sulphate and evaporated to dryness under reduced pressure to yield 404 g of 2-(diethoxymethyl)-alpha-(2-fluorophenyl)-benzenemethanol as an oil, M.S. (C.I.) (M/Z): 305 [M+H]+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Bromobenzaldehyde diethyl acetal, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Akzo Nobel, N.V.; US6080773; (2000); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 707-07-3 as follows. COA of Formula: C10H14O3

General procedure: To a stirred solution of the respective N-carbamate-protected aminovicinal diol 4 (0.50 mmol, 1 equiv) in CH2Cl2 (10 mL, 0.05 M) were added BF3¡¤OEt2 (50 muL, 0.050 mmol, 0.1 equiv, 1.0 M solution in CH2Cl2) and trimethyl orthobenzoate (0.13 mL, 0.75 mmol, 1.5 equiv) at r.t. The resulting mixture was refluxed or stirred at r.t. under N2 until TLC showed complete conversion of the substrate. The reaction was quenched with sat. aq NaHCO3 and extracted with EtOAc (2 ¡Á). The combined organic layers were washed with brine, dried (MgSO4), filtered, and concentrated in vacuo. The residue was purified by flash chromatography on silica gel (hexane/EtOAc) to give the desired product 5.

According to the analysis of related databases, 707-07-3, the application of this compound in the production field has become more and more popular.

Reference:
Article; Park, Heemin; Kwon, Yongseok; Shin, Jae Eui; Kim, Woo-Jung; Hwang, Soonho; Lee, Seokwoo; Kim, Sanghee; Synthesis; vol. 49; 12; (2017); p. 2761 – 2767;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 38336-04-8, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 38336-04-8, name is 2-(Benzyloxy)-1-ethanamine, This compound has unique chemical properties. The synthetic route is as follows.

3-(2-Benzyloxyethyl)-2,4-dioxo-3,9-diaza-bicyclo[3.3.1]nonane-9-carboxylic Acid Benzyl Ester (Compound 3) 2,4-Dioxo-3-oxa-9-aza-bicyclo[3.3.1]nonane-9-carboxylic acid benzyl ester (Compound 2, 1.02 g, 3.52 mmol) was dissolved in dioxane (5 mL), and 2-benzyloxyethylamine (0.50 g, 3.32 mmol) was added from the top. The mixture was stirred at room temperature for 1 hour (hr). Then, acetic anhydride (0.62 mL, 6.64 mmol) was added, and the reaction was refluxed for 5 hours. Dioxane was evaporated, and flash chromatographic purification of the residue (20% EtOAc/hexanes) gave Compound 3 (1.26 g, 90%) as a pale yellow oil: Rf (50% EtOAc/hexanes): 0.80.

The chemical industry reduces the impact on the environment during synthesis 2-(Benzyloxy)-1-ethanamine. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Pfizer Inc; US6630472; (2003); B1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 887581-09-1, The chemical industry reduces the impact on the environment during synthesis 887581-09-1, name is (2-Bromo-5-methoxyphenyl)methanamine, I believe this compound will play a more active role in future production and life.

General procedure: To a magnetically stirred solution of the formyl ester 8a (400 mg, 1.6 mmol) in CH2ClCH2Cl (5 mL) at room temperature, were added sequentially 2-bromobenzyl amine 3a (420 mg, 2.2 mmol) and AcOH (0.14 mL, 2.4 mmol) followed by refluxing of the mixture for 12 h. After cooling, the reaction mixture was treated with aqueous NaHCO3 solution and extracted with ethyl acetate (3 ¡Á 12 mL). The combined organic layers were washed with brine, dried (Na2SO4), and filtered. Concentration of the filtrate followed by flash chromatography (ethyl acetate/hexane, 1:6 to 2:3) furnished the cyclic enamide 9aa (480 mg, 80%) as brown viscous oil.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, (2-Bromo-5-methoxyphenyl)methanamine, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Satyanarayana, Gedu; Maier, Martin E.; Tetrahedron; vol. 68; 6; (2012); p. 1745 – 1749;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 1663-61-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1663-61-2, name is (Triethoxymethyl)benzene belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: The 2-aminobenzamide (1 equiv), the orthoester (2?3 equiv) and absolute ethanol (2?3 mL) wereplaced in a 15-mL Chemglass screw-cap pressure tube (No. CG-1880-01, Chemglass, Vineland, NJ,USA). Glacial acetic acid (3 equiv) was added, N2 was introduced to the vessel and the cap wastightened. The vessel was heated at 110 ¡ãC for 12?72 h, then cooled and concentrated to give thequinazolinone, which was purified by crystallization from absolute ethanol or trituration from 5percentether in pentane. The following compounds were prepared:

The synthetic route of (Triethoxymethyl)benzene has been constantly updated, and we look forward to future research findings.

Reference:
Article; Gavin, Joshua T.; Annor-Gyamfi, Joel K.; Bunce, Richard A.; Molecules; vol. 23; 11; (2018);,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem