Ethers-buliding-blocks

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 22094-18-4, name is 1,3-Dibromo-2,2-dimethoxypropane, This compound has unique chemical properties. The synthetic route is as follows., Safety of 1,3-Dibromo-2,2-dimethoxypropane

A suspension of sodium hydride (2 g, 50.0 mmol) in DMF (20 ml) was cooled to 0 degree before 2-(4-bromophenyl)acetonithle (4 g, 20.40 mmol) was added slowly. The suspension was stirred at 0 degree for another 10min before 1,3-dibromo-2,2- dimethoxypropane (2.62 g, 10.00 mmol) was added. The reaction mixture was stirred at60 C for 20h before cooled to room temperature, poured into water (75ml) and extracted with ethyl acetate (2X50ml). The combined organic phase was washed with water (75ml), brine (50ml) and concentrated. The crude product was purified by column (100g, biotage) eluted with ethyl acetate/cyclohexane (0-10%) to afford product 1.7g (59% yield). NMR (500 MHz, DMSO-d6): 7.46 (d, 2H), 7.29 (d, 2H), 3.21 (s, 3H), 3.11 (s, 3H), 3.03 (d, 2H), 2.62 (d, 2H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 22094-18-4.

Reference:
Patent; ALMAC DISCOVERY LIMITED; ZHANG, Lixin; TREVITT, Graham, Peter; MIEL, Hughes; BURKAMP, Frank; HARRISON, Timothy; WILKINSON, Andrew, John; FABRITIUS, Charles-Henry; WO2011/77098; (2011); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 588-96-5 as follows. name: p-Bromophenetole

General procedure: In air, aryl halide (0.2 mmol), arylboronic acid (0.22 mmol),K2CO3 (0.3 mmol), 5 ml of distilled water, and 2 mg of catalystwere combined in a 10 ml round bottom flask. The reactionmixture was magnetically stirred and the temperature wasmaintained at 75 C in an oil bath. Reaction progress was monitoredby TLC. After reaction was completed, the reaction mixturewas cooled to room temperature and filtrated. The filtratedsolid was washed with water (35 ml) and dissolved withethyl acetate. The catalyst was separated by filtration, washedwith water, and dried in vacuum. The combined organic phasewas dried with anhydrous MgSO4, and the solvent was removedunder reduced pressure to give the product.

According to the analysis of related databases, 588-96-5, the application of this compound in the production field has become more and more popular.

Reference:
Article; Ma, Hengchang; Bao, Zhikang; Han, Guobin; Yang, Ningning; Xu, Yufei; Yang, Zengming; Cao, Wei; Ma, Yuan; Cuihua Xuebao/Chinese Journal of Catalysis; vol. 34; 3; (2013); p. 578 – 584;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7252-83-7, name is 2-Bromo-1,1-dimethoxyethane belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 2-Bromo-1,1-dimethoxyethane

As described by Doel et al.,13 a solution of adenine or thymine (1 equiv) and K2CO3 (1 equiv) in DMF (10 mL) was stirred at 100 C in the presence of 2-bromo-1,1-dimethoxyethane (1.1 equiv). After 24 h, the reaction was filtered and the solvent removed under reduced pressure. The crude mixture was purified by column chromatography in silica gel with MeOH: CH2Cl2 or EtOAc: hexane as mobile phase. Corresponding 9-(2,2-dimethoxyethyl)-adenine and 1-(2,2-dimethoxyethyl)-thymine were obtained in 61% and 38% isolated yields respectively. Both acetals were completely hydrolyzed after 1 h stirring in HCl 1 N at 90 C, to yield the corresponding aldehydes.20

The synthetic route of 7252-83-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Palazzolo, Martin A.; Perez-Sanchez, Maria; Dominguez De Maria, Pablo; Iribarren, Adolfo M.; Lewkowicz, Elizabeth S.; Tetrahedron Letters; vol. 53; 50; (2012); p. 6797 – 6800,4;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 13070-45-6 as follows. HPLC of Formula: C13H15NO

Dissolve 93 mg of S11 in acetonitrile.Add 135 mg of 3,4-dihydroxybenzonitrile and add 7 mg of iron phthalocyanine under ice bath.30 mg of acetic acid, 4.8 mg of methanesulfonic acid and 135 mg of tert-butyl hydroperoxide, After stirring the reaction for 5 minutes under the same conditions,After monitoring the reaction, it was diluted with 20 mL of ethyl acetate and extracted with 20 mL of H2O.The combined organic layer Wash with 20 mL of saturated brine.Dry with anhydrous Na2SO4, filter and spin dry. Purified with silica gel column, eluent PE/ EtOAc = 8:1,188 mg of compound 11,The reaction yield was 56%;The product was a light yellow oil at room temperature.Physical state: light yellow oil; melting point: 138.5-139.4 C

According to the analysis of related databases, 13070-45-6, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Fuzhou University; Chen Haijun; Guo Mei; Ye Jinxiang; Chen Yi; Lin Yuqi; Gao Yu; (14 pag.)CN108530456; (2018); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 578-57-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 578-57-4, name is 1-Bromo-2-methoxybenzene belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: CuI (0.05 mmol), aryl halide (0.5 mmol), Na3PO4 (0.5 mmol), 25-28% aqueous ammonia (1 mL), and PEG-400 (2 mL) were added to a sealed tube. The reaction mixture was stirred at 100 C (aryl iodides for 15 h and aryl bromides for 24 h) and then cooled to room temperature and extracted with diethyl ether (3 times). The combined organic phase was then dried with anhydrous Na2SO4 and the solvent was removed under reduced pressure. The remaining residue was purified by column chromatography on silica gel to provide the desired aryl amines.

The synthetic route of 1-Bromo-2-methoxybenzene has been constantly updated, and we look forward to future research findings.

Reference:
Article; Chen, Junmin; Yuan, Tangjun; Hao, Wenyan; Cai, Mingzhong; Tetrahedron Letters; vol. 52; 29; (2011); p. 3710 – 3713;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 24332-20-5, name is 1,1,2-Trimethoxyethane, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 24332-20-5, COA of Formula: C5H12O3

Reaction of cis – cedimnylene glycol with methoxyacetaldehyde dimethylacetal24 g (0.1 mol) of cis-cedrylene glycol (using 26 g of a GC content of 92%), 127.6 g (1.45 mol)Methoxyacetaldehyde dimethyl acetal and 0.4 g of concentrated sulfuric acid were stirred at 10 C for 24 hours. At the end of the reaction, methyl tert-butyl was addedEther, washed with a 5% solution of sodium hydrogencarbonate, and the low boiling components removed by distillation. After the addition of n-hexane, unreacted cis-isomer was addedType – cypressane diol crystallization, filtration separation. After concentration of the filtrate by evaporation, 30.4 g of crude product was obtained. According toThe content of the compounds of formulas (X) and (XI) in the product obtained by GC analysis was 51% (corresponding to a theoretical yield of 50%). The originalThe material was dissolved in dipropylene glycol (DPG) to prepare a solution of the compound of formulas (X) and (XI) in an amount of 10% by weightExample (VIII): (IX) = 1: 6.2).For analytical purposes, cyclohexane / ethyl acetate eluant (60/1) was passed through silica gel 60 (0.04-0.063 mm)(X) and (XI) in the crude product were separated from each other by liquid chromatography on a liquid chromatograph. (X)Of the compound has a purity of 99.4% and the purity of the compound of formula (XI) is 96.9%.Compounds of formula (X): & lt; EMI ID =

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1,1,2-Trimethoxyethane, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Simrose Corporation; Bei, Ende hhuoersiche; (41 pag.)CN105228993; (2016); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 204452-91-5, A common heterocyclic compound, 204452-91-5, name is 7-(Dimethoxymethyl)-1,2,3,4-tetrahydro-1,8-naphthyridine, molecular formula is C11H16N2O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 3: Preparation of 6-bromo-7-(dimethoxymethyl)-1,2,3,4-tetrahydro-1,8-naphthyridine NBS (38.3 g, 215 mmol) was added in batches to a solution of 7-(dimethoxymethyl)-1,2,3,4-tetrahydro-1,8-naphthyridine (42.7 g, 205 mmol) in MeCN (1 L) at room temperature. The reaction solution stirred for 1 hour and concentrated. The resulting residue was dissolved in CH2Cl2, washed with 1 M NaOH aqueous solution and saturated brine successively, dried over anhydrous sodium sulfate and concentrated. The resulting residue was subjected to column chromatography to obtain the title compound 6-bromo-7-(dimethoxymethyl)-1,2,3,4-tetrahydro-1,8-naphthyridine (47.5 g, total yield of three steps: 81%). 1H NMR (400 MHz, CDCl3): delta 7.27 (s, 1H), 5.55 (s, 1H), 5.39 (br s, 1H), 3.45 (s, 6H), 3.38 (m, 2H), 2.70 (t, J = 6.0 Hz, 2H), 1.88 (m, 2H); MS m/z (ESI): 287.0 [M+H]+.

The synthetic route of 204452-91-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Jiangsu Hansoh Pharmaceutical Group Co., Ltd.; Shanghai Hansoh Biomedical Co., Ltd.; GAO, Peng; XIU, Wenhua; WANG, Shaobao; LIU, Lei; BAO, Rudi; (94 pag.)EP3444250; (2019); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 494-99-5,Some common heterocyclic compound, 494-99-5, name is 1,2-Dimethoxy-4-methylbenzene, molecular formula is C9H12O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

1 ,2-Dimethoxy-5-methyl-3,4-dinitro-benzene was synthesized by adding 15.0 g of 3,4- dimethoxytoluene portionwise to a mixture of 60 mL fumic nitric acid and 300 mL water keeping the temperature < 200C with the aid of an ice bath. The reaction was stirred for 1 h at 00C, quenched by the addition of ice and stirred for another 1 h. The yellow solid was filtered off, washed with ice cold water and dried in vacuo to yield 9.2 g of 1 ,2-dimethoxy- 5-methyl-3,4-dinitro-benzene as yellow solid.1H-NMR (CDCI3): 6.88 (s, 1 H); 4.01 (s, 3H); 3.98 (s, 3H); 2.52 (s, 3H). These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1,2-Dimethoxy-4-methylbenzene, its application will become more common. Reference:
Patent; ACTELION PHARMACEUTICALS LTD; WO2008/132679; (2008); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 929-75-9, name is 1,11-Diamino-3,6,9-trioxaundecane, A new synthetic method of this compound is introduced below., Safety of 1,11-Diamino-3,6,9-trioxaundecane

General procedure: A two-neck flaskequipped with a magnetic stirrer and reflux condenser, flushed with dry argon, was charged withcorresponding triazacycloalkane derivative 8-10 (0.15-0.29 mmol), Pd(dba)2 (16 mol%),DavePhos (18 mol%), and absolute dioxane (10-15 ml). The mixture was stirred for 2-3 min,then corresponding oxadiamine (0.15-0.29 mmol) was added followed by tBuONa (0.45-0.9mmol). The reaction mixture was stirred at reflux for 24 h, cooled down to ambient temperature,the residue was filtered off, washed with dichloromethane (5 ml), combined organic fractionswere evaporated in vacuo, and the residue was chromatographed on silica gel using a sequenceof eluents CH2Cl2,CH2Cl2-MeOH 100:1-2:1, CH2Cl2-MeOH- NH3aq100:20:1-10:4:1.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Chernichenko, Nataliya M.; Shevchuk, Vadim N.; Averin, Alexei D.; Maloshitskaya, Olga A.; Beletskaya, Irina P.; Synlett; vol. 28; 20; (2017); p. 2800 – 2806;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 53087-13-1,Some common heterocyclic compound, 53087-13-1, name is 1-(Benzyloxy)-3-bromobenzene, molecular formula is C13H11BrO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Iodine, warmed up with magnesium, was added to a suspension of magnesium tunings (i .29 g,52.8 mmol) in dry THF (50 mL). The mixture was ref luxed and about 5% of a solution of 3-bromophenol (i3.9 g, 52.8 mmol) was added. When the reaction had started, the solution of the bromide was added drop-wise and the mixture was then ref luxed for one more hour. Themixture was cooled down to about 5 00 and a solution of the cyclopentanone (4.44 g, 52.8 mmol) in THF (50 mL) was added drop-wise. The mixture was stirred at rt for 72 h, then the reactio was quenched with cooled saturated ammonium chloride solution and extracted with diethyl ether (x3). The organic phase was washed with brine, dried (Na2SO4), filtered and concentrated. The product was purified by silica gel chromatography (isohexane / EtOAc),which gave the title compound (8.5 g, 54%).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-(Benzyloxy)-3-bromobenzene, its application will become more common.

Reference:
Patent; MEDIVIR AB; KALAYANOV, Genadiy; TORSSELL, Staffan; WAeHLING, Horst; WO2015/34420; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem