Ethers-buliding-blocks

Exploring a cascade Heck-Suzuki reaction based route to kinase inhibitors using design of experiments was written by Ekebergh, Andreas;Lingblom, Christine;Sandin, Peter;Wenneraas, Christine;Maartensson, Jerker. And the article was included in Organic & Biomolecular Chemistry in 2015.Category: ethers-buliding-blocks This article mentions the following:

Design of Experiments (DoE) was used to optimize a diversity oriented palladium catalyzed cascade Heck-Suzuki reaction for the construction of 3-alkenyl substituted cyclopenta[b]indole compounds The obtained DoE model revealed a reaction highly dependent on the ligand. Guided by the model, an optimal ligand was chosen that selectively delivered the desired products in high yields. The conditions were applicable with a variety of boronic acids and were used to synthesize a library of 3-alkenyl derivatized compounds Focusing on inhibition of kinases relevant for combating melanoma, the library was used in an initial structure-activity survey. In line with the observed kinase inhibition, cellular studies revealed one of the more promising derivatives to inhibit cell proliferation via an apoptotic mechanism. In the experiment, the researchers used many compounds, for example, (4-((4-Methoxybenzyl)oxy)phenyl)boronic acid (cas: 156635-90-4Category: ethers-buliding-blocks).

(4-((4-Methoxybenzyl)oxy)phenyl)boronic acid (cas: 156635-90-4) belongs to ethers. Relative to alcohols, ethers are generally less dense, are less soluble in water, and have lower boiling points. They are relatively unreactive, and as a result they are useful as solvents for fats, oils, waxes, perfumes, resins, dyes, gums, and hydrocarbons. Vapours of certain ethers are used as insecticides, miticides, and fumigants for soil. Ethers are good solvents partly because they are not very reactive. Most ethers can be cleaved, however, by hydrobromic acid (HBr) to give alkyl bromides or by hydroiodic acid (HI) to give alkyl iodides.Category: ethers-buliding-blocks

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Palladium-catalyzed desymmetric [2+2+2] cycloaddition of 1,6-enyne and alkyne was written by Zhao, Wei-Cheng;Wang, Xin;Feng, Juhua;Tian, Ping;He, Zhi-Tao. And the article was included in Tetrahedron in 2021.Electric Literature of C6H10O2 This article mentions the following:

A novel and straightforward palladium-catalyzed desym. [2+2+2] cycloaddition reaction of alkyne-tethered cyclohexadienone and internal alkyne is established. Widely existing fused tricyclic hydronaphthofuran and hydronaphthopyrrole frameworks are prepared diastereoselectively in moderate to excellent yields. One-step aromatization process provides a new and facile access to important benzene-containing tricycles from above cycloaddition products. In the experiment, the researchers used many compounds, for example, 1,4-Dimethoxy-2-butyne (cas: 16356-02-8Electric Literature of C6H10O2).

1,4-Dimethoxy-2-butyne (cas: 16356-02-8) belongs to ethers. Relative to alcohols, ethers are generally less dense, are less soluble in water, and have lower boiling points. They are relatively unreactive. Ethers are good solvents partly because they are not very reactive. Most ethers can be cleaved, however, by hydrobromic acid (HBr) to give alkyl bromides or by hydroiodic acid (HI) to give alkyl iodides.Electric Literature of C6H10O2

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

High-Performance n-Type Organic Electrochemical Transistors Enabled by Aqueous Solution Processing of Amphiphilicity-Driven Polymer Assembly was written by Jeong, Dahyun;Jo, Il-Young;Lee, Seungjin;Kim, Ji Hwan;Kim, Youngseok;Kim, Donguk;Reynolds, John R.;Yoon, Myung-Han;Kim, Bumjoon J.. And the article was included in Advanced Functional Materials in 2022.Electric Literature of C5H12O3 This article mentions the following:

Despite the growing attention on organic electrochem. transistors (OECTs), most research has focused on the design of p-type active materials, and the number of high-performance n-type materials is limited. Herein, a series of naphthalene diimide-based polymers incorporated with asym. branched oligo(ethylene glycol) (OEG) side chains are developed to enable green-solvent-processed, high-performance n-type OECTs. The branched OEG side chains afford sufficient solubility in eco-friendly ethanol/water solvent mixtures Importantly, taking advantage of the amphiphilic nature of OEG-based polymers, ethanol/water solvents selectively solvate hydrophilic OEG side chains, while producing assembled π-π stacks of hydrophobic backbones. This enables highly ordered polymer packing with a preferential edge-on orientation, and thus excellent lateral charge transport. In particular, the fine-tuned OEG side chains of P(NDIMTEG-T) provide compact backbone packing, effective polaron generation, and superior electrochem. stability with optimized swelling capability. The resultant n-type OECT shows the best elec./electrochem. performance in the family, represented by a high transconductance (g_m) of 0.38 S cm^-1 and a large figure-of-merit (μC*) of 0.56 F V^-1 cm^-1 s^-1. This study demonstrates the use of aqueous processing in OECTs, for the first time, and suggests important guidelines for the design of n-type organic mixed ionic-electronic conductors with excellent OECT characteristics. In the experiment, the researchers used many compounds, for example, 2-(2-Methoxyethoxy)ethanol (cas: 111-77-3Electric Literature of C5H12O3).

2-(2-Methoxyethoxy)ethanol (cas: 111-77-3) belongs to ethers. Ether is less polar than esters, alcohols or amines because of the oxygen atom that is unable to participate in hydrogen bonding due to the presence of bulky alkyl groups on both sides of the oxygen atom. At room temperature, ethers are pleasant-smelling colourless liquids. Relative to alcohols, ethers are generally less dense, are less soluble in water, and have lower boiling points. They are relatively unreactive, and as a result they are useful as solvents for fats, oils, waxes, perfumes, resins, dyes, gums, and hydrocarbons. Vapours of certain ethers are used as insecticides, miticides, and fumigants for soil.Electric Literature of C5H12O3

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Copper-mediated C-H trifluoromethylation of quinones was written by Ilchenko, Nadia O.;Janson, Paer G.;Szabo, Kalman J.. And the article was included in Chemical Communications (Cambridge, United Kingdom) in 2013.SDS of cas: 605-94-7 This article mentions the following:

Quinones undergo copper-mediated C-H trifluoromethylation reactions using a hypervalent iodine reagent. The reactions have a broad synthetic scope involving naphtho, alkyl, chloro and methoxy quinones. In the experiment, the researchers used many compounds, for example, 2,3-Dimethoxy-5-methylcyclohexa-2,5-diene-1,4-dione (cas: 605-94-7SDS of cas: 605-94-7).

2,3-Dimethoxy-5-methylcyclohexa-2,5-diene-1,4-dione (cas: 605-94-7) belongs to ethers. Relative to alcohols, ethers are generally less dense, are less soluble in water, and have lower boiling points. They are relatively unreactive, and as a result they are useful as solvents for fats, oils, waxes, perfumes, resins, dyes, gums, and hydrocarbons. Vapours of certain ethers are used as insecticides, miticides, and fumigants for soil. Autoxidation is the spontaneous oxidation of a compound in air. In the presence of oxygen, ethers slowly autoxidize to form hydroperoxides and dialkyl peroxides. If concentrated or heated, these peroxides may explode. To prevent such explosions, ethers should be obtained in small quantities, kept in tightly sealed containers, and used promptly.SDS of cas: 605-94-7

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Isobaric vapor-liquid equilibrium of water + glymes binary mixtures: Experimental measurements and molecular thermodynamic modelling was written by Crespo, Emanuel A.;Chouireb, Naima;Igoudjilene, O. Tafat;Vega, Lourdes F.;Carvalho, Pedro J.;Coutinho, Joao A. P.. And the article was included in Fluid Phase Equilibria in 2020.Category: ethers-buliding-blocks This article mentions the following:

In this work, new exptl. data on the isobaric vapor-liquid equilibrium (VLE) of binary aqueous systems, with six different glycol ethers (glymes), some of which are currently used in the Selexol process, were measured at three different pressures, namely 0.05, 0.07, and 0.1 MPa. From the exptl. data, the water activity coefficients were estimated using the modified Raoult’s law and used to infer about the effect of the glymes structure on their interactions with water. Moreover, using a coarse-grain mol. model previously proposed in the framework of the soft-SAFT equation of state (EoS) for both glycols and glymes, the exptl. data were successfully correlated with a single state-independent binary interaction parameter and average absolute deviations from the exptl. data of 1.30 K. Furthermore, the model was used in a predictive manner to obtain the water activity coefficients in the whole composition range, providing useful insights into the systems non-ideality. In the experiment, the researchers used many compounds, for example, 2-(2-Methoxyethoxy)ethanol (cas: 111-77-3Category: ethers-buliding-blocks).

2-(2-Methoxyethoxy)ethanol (cas: 111-77-3) belongs to ethers. Ether is less polar than esters, alcohols or amines because of the oxygen atom that is unable to participate in hydrogen bonding due to the presence of bulky alkyl groups on both sides of the oxygen atom. Autoxidation is the spontaneous oxidation of a compound in air. In the presence of oxygen, ethers slowly autoxidize to form hydroperoxides and dialkyl peroxides. If concentrated or heated, these peroxides may explode. To prevent such explosions, ethers should be obtained in small quantities, kept in tightly sealed containers, and used promptly.Category: ethers-buliding-blocks

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Kinetic and mechanistic insights into hydrogenolysis of lignin to monomers in a continuous flow reactor was written by Li, Yanding;Demir, Benginur;Vazquez Ramos, Leida M.;Chen, Mingjie;Dumesic, James A.;Ralph, John. And the article was included in Green Chemistry in 2019.Safety of 3-(3,4-Dimethoxyphenyl)propan-1-ol This article mentions the following:

Industrial biorefineries remain limited due to inefficient valorization of their lignin streams. Rarely can a lignin depolymerization method be combined with a current polysaccharide-centric biorefinery process. Hydrogenolysis is among the more promising methods for depolymerizing lignin on an industrial scale. We performed reaction kinetics and mechanistic studies on lignin model compounds to understand lignin hydrogenolysis pathways, demonstrating that lignin end-units and internal units react significantly differently. Understanding the reaction mechanism and its sensitivity to variables helped us establish a continuous lignin upgrading process from various fractionated lignins. Near-theor. yields of lignin platform monomers with >80% overall product selectivity were obtained in a continuous hydrogenolysis process using a Pd/C catalyst. In the experiment, the researchers used many compounds, for example, 3-(3,4-Dimethoxyphenyl)propan-1-ol (cas: 3929-47-3Safety of 3-(3,4-Dimethoxyphenyl)propan-1-ol).

3-(3,4-Dimethoxyphenyl)propan-1-ol (cas: 3929-47-3) belongs to ethers. Of all the functional groups, ethers are the least reactive ones. Ether bonds are quite stable towards bases, oxidizing agents and reducing agents. But on the other hand, ethers undergo cleavage by reaction with acids. The unique properties of ethers (i.e., that they are strongly polar, with nonbonding electron pairs but no hydroxyl group) enhance the formation and use of many reagents. For example, Grignard reagents cannot form unless an ether is present to share its lone pair of electrons with the magnesium atom. Complexation of the magnesium atom stabilizes the Grignard reagent and helps to keep it in solution.Safety of 3-(3,4-Dimethoxyphenyl)propan-1-ol

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Solvent-free synthesis of 2-amino-5-aryloxymenthyl-1,3,4-thiadiazoles and their coumarin or benzofuran bis-heterocyclic derivatives was written by Li, Zheng;Yu, Jin-Lan;Yang, Jing-Ya;Zhu, Wei;Zhao, Yan-Long;Xing, Yu-Lin;Wang, Xi-Cun. And the article was included in Phosphorus, Sulfur and Silicon and the Related Elements in 2006.Computed Properties of C9H10O4 This article mentions the following:

2-Amino-5-aryloxymethyl-1,3,4-thiadiazoles were synthesized rapidly by a microwave-accelerated solvent-free procedure in high yield via the condensation of thiosemicarbazide with aryloxyacetic acids using poly(ethyleneglycol)-supported dichlorophosphate as a dehydration reagent. The solvent-free N-acylation of 2-amino-5-aryloxymethyl-1,3,4-thiadiazoles with coumarin-3-carboxylic acid chloride or benzofuran-2-carboxylic acid chloride efficiently afforded corresponding bis-heterocyclic derivatives, 2-(coumarin-3-carboxamido)-5-aryloxymethyl-1,3,4-thiadiazoles, and 2-(benzofuran-2-carboxamido)-5-aryloxymethyl-1,3,4-thiadiazoles. The strategy has advantages of no organic solvent pollution, an elevated reaction rate, an improved yield, and a simple work-up procedure. In the experiment, the researchers used many compounds, for example, 2-(4-Methoxyphenoxy)acetic acid (cas: 1877-75-4Computed Properties of C9H10O4).

2-(4-Methoxyphenoxy)acetic acid (cas: 1877-75-4) belongs to ethers. Of all the functional groups, ethers are the least reactive ones. Ether bonds are quite stable towards bases, oxidizing agents and reducing agents. At room temperature, ethers are pleasant-smelling colourless liquids. Relative to alcohols, ethers are generally less dense, are less soluble in water, and have lower boiling points. They are relatively unreactive, and as a result they are useful as solvents for fats, oils, waxes, perfumes, resins, dyes, gums, and hydrocarbons. Vapours of certain ethers are used as insecticides, miticides, and fumigants for soil.Computed Properties of C9H10O4

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic sweetening agents-a survey of the materials available, including cyclamates was written by Bottle, R. T.. And the article was included in Manufacturing Chemist (1930-1963) in 1964.Safety of 3-Methyl-4-nitroanisole This article mentions the following:

Twenty-two substances with their resp. sweetness were listed as compared to sucrose. Especially strong were sweeteners such as stevioside, glycyrrhizin, and 3-(2-benzimidazolyl)propionic acid nicotinate. Saccharin and the cyclamates are the 2 most important synthetic sweeteners, since they are the only ones considered safe for use in foods. 30 references. In the experiment, the researchers used many compounds, for example, 3-Methyl-4-nitroanisole (cas: 5367-32-8Safety of 3-Methyl-4-nitroanisole).

3-Methyl-4-nitroanisole (cas: 5367-32-8) belongs to ethers. Of all the functional groups, ethers are the least reactive ones. Ether bonds are quite stable towards bases, oxidizing agents and reducing agents. But on the other hand, ethers undergo cleavage by reaction with acids. Autoxidation is the spontaneous oxidation of a compound in air. In the presence of oxygen, ethers slowly autoxidize to form hydroperoxides and dialkyl peroxides. If concentrated or heated, these peroxides may explode. To prevent such explosions, ethers should be obtained in small quantities, kept in tightly sealed containers, and used promptly.Safety of 3-Methyl-4-nitroanisole

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Photoinduced Deoxygenative Borylations of Aliphatic Alcohols was written by Wu, Jingjing;Baer, Robin M.;Guo, Lin;Noble, Adam;Aggarwal, Varinder K.. And the article was included in Angewandte Chemie, International Edition in 2019.Quality Control of 3-(3,4-Dimethoxyphenyl)propan-1-ol This article mentions the following:

A photochem. method for converting aliphatic alcs. into boronic esters is described. Preactivation of the alc. as a 2-iodophenyl-thionocarbonate enables a novel Barton-McCombie-type radical deoxygenation that proceeds efficiently with visible light irradiation and without the requirement for a photocatalyst, a radical initiator, or Sn or Si hydrides. The resultant alkyl radical is intercepted by bis(catecholato)diboron, furnishing boronic esters from a diverse range of structurally complex alcs. In the experiment, the researchers used many compounds, for example, 3-(3,4-Dimethoxyphenyl)propan-1-ol (cas: 3929-47-3Quality Control of 3-(3,4-Dimethoxyphenyl)propan-1-ol).

3-(3,4-Dimethoxyphenyl)propan-1-ol (cas: 3929-47-3) belongs to ethers. Ether is less polar than esters, alcohols or amines because of the oxygen atom that is unable to participate in hydrogen bonding due to the presence of bulky alkyl groups on both sides of the oxygen atom. Electron-deficient reagents are also stabilized by ethers. For example, borane (BH3) is a useful reagent for making alcohols. Pure borane exists as its dimer, diborane (B2H6), a toxic gas that is inconvenient and hazardous to use. Borane forms stable complexes with ethers, however, and it is often supplied and used as its liquid complex with tetrahydrofuran (THF).Quality Control of 3-(3,4-Dimethoxyphenyl)propan-1-ol

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Alkaline aerobic oxidation of native softwood lignin in the presence of Na⁺-cyclic polyether complexes was written by Hosoya, Takashi;Kawase, Kei;Hirano, Yuki;Ikeuchi, Mizuki;Miyafuji, Hisashi. And the article was included in Journal of Wood Chemistry and Technology in 2022.Related Products of 112-49-2 This article mentions the following:

Alk. aerobic oxidation is a promising way to convert lignin to low mol. weight phenols, especially 4-hydroxybenzaldehydes. Our previous studies reported that oxidation of softwood lignin samples with a bulky cation, Bu4N⁺, facilitates selective production of vanillin (4-hydroxy-3-methoxybenzaldehyde). This study presents vanillin production from native softwood lignin in Japanese cedar (Cryptomeria japonica) in NaOH aqueous in the presence of cyclic polyethers, with our expectation that Na⁺-polyether complexes exhibit effects similar to those of Bu4N⁺. Oxidation of wood flour (10 mg) in 4.0 M NaOH aqueous (2.0 mL) at 120°C under air gave vanillin with 6.2 weight% lignin-based yield, which was raised to 15.2 weight% by the addition of 15-crown-5 (1,4,7,10,13-pentaoxacyclopentadecane). On the other hand, such effect was not observed with the addition of tetraethylene glycol di-Me ether, a non-cyclic analog of 15-crown-5. Mechanistic study with a lignin model compound revealed that stabilization of a vanillin precursor by the complex cation was a reason for the increased vanillin yield exhibited by the crown ether. This is similar to the influence of Bu4N⁺ reported previously, suggesting effective control of aerobic oxidation by large size cationic species. In the experiment, the researchers used many compounds, for example, 2,5,8,11-Tetraoxadodecane (cas: 112-49-2Related Products of 112-49-2).

2,5,8,11-Tetraoxadodecane (cas: 112-49-2) belongs to ethers. Of all the functional groups, ethers are the least reactive ones. Ether bonds are quite stable towards bases, oxidizing agents and reducing agents. But on the other hand, ethers undergo cleavage by reaction with acids. Ethers are good solvents partly because they are not very reactive. Most ethers can be cleaved, however, by hydrobromic acid (HBr) to give alkyl bromides or by hydroiodic acid (HI) to give alkyl iodides.Related Products of 112-49-2

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem