Tag: M.W=100-200

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 22483-09-6, name is 2,2-Dimethoxyethanamine belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Safety of 2,2-Dimethoxyethanamine

Benzyl chloroformate (231.3 g, 1.3 mol) was added gradually to a mixture of aminoacetaldehyde dimethyl acetal (152.0 g, 1.3 mol) in toluene (750 mL) and aqueous NaOH (72.8 g, 1.82 mol; in 375 mL of water) at 10-20 C. After the addition was complete, the mixture was stirred at ambient temperature for 4 h. The organic layer was separated, washed with brine (2×100 mL) and concentrated to provide the title compound.

The synthetic route of 22483-09-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Schrimpf, Michael R.; Sippy, Kevin B.; Ji, Jianguo; Li, Tao; Pace, Jennifer M.; Briggs, Clark A.; US2005/171079; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 592-55-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 592-55-2 name is 1-Bromo-2-ethoxyethane, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To a solution of 1,3-dithiane (1.02 g, 8.51 mmol) in THF (20 mL) under nitrogen at -3O0C was added n- BuLi in hexanes (4.90 mL, 1.6 M, 7.84 mmol) dropwise. The reaction was left for 2 hours at this temperature then was cooled to -780C when a solution of 2-bromoethyl ethyl ether (0.80 mL, 7.09 mmol) in THF (5 mL) was added dropwise. The reaction was then left to warm to room temperature and stir for 18 hours. The reaction was quenched with 10% citric acid (12 mL) and diluted with ethyl acetate (70 mL) . The aqueous phase was extracted with ethyl acetate (2 x 10 mL) . The combined organic phase was dried, filtered and the solvent removed in vacuo. This material (1.43 g) was dried onto silica gel then purified by flash chromatography, eluting with petroleum spirit/ethyl acetate (9:1) to afford, as a yellow oil, 2- (2-ethoxy-ethyl) – [1,3] dithiane (0.49 g, 36%). 1H NMR (CDCl3, 400 MHz) delta= 1.20 (t, J = 7.0 Hz, 3H), 1.80- 1.94 (m, IH), 2.02 (q, J= 6.4 Hz, 2H), 2.08-2.18 (m, IH), EPO 2.77-2.92 (m, 4H) , 3.49 (q, J = 7.2 Hz, 2H) , 3.58 (t, J” = 6.4 Hz, 2H) , 4.21 (t, J = 7.2 Hz, IH) .

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Bromo-2-ethoxyethane, and friends who are interested can also refer to it.

Reference:
Patent; ZINGOTX PTY LTD; WO2006/125276; (2006); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 578-57-4, The chemical industry reduces the impact on the environment during synthesis 578-57-4, name is 1-Bromo-2-methoxybenzene, I believe this compound will play a more active role in future production and life.

A screw-cap vial equipped with a magnetic stir bar was charged with aryl halide (1 mmol), hexa-n-butylditin (0.5 mmol),palladium acetate (0.01 mmol) and tricyclohexylphosphine (0.02 mmol),followed by anhydrous cesium fluoride (1.5 mmol). The resulting mixture was manually homogenized with a magnet. A vial was transferred to a preheated oil bath (110 C). After 24 h, the mixture was cooled, dissolved in CH2Cl2-H2O mixture (1:1), the organic phase was separated, the solvent was evaporated in vacuo and the product was isolated by flash chromatography on a silica gel by elution with hexane-CH2Cl2 mixture.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-2-methoxybenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Gribanov, Pavel S.; Golenko, Yulia D.; Topchiy, Maxim A.; Philippova, Anna N.; Kirilenko, Nikita Yu.; Krivoshchapov, Nikolai V.; Sterligov, Grigorii K.; Asachenko, Andrey F.; Bermeshev, Maxim V.; Nechaev, Mikhail S.; Mendeleev Communications; vol. 28; 3; (2018); p. 323 – 325;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 1535-73-5, The chemical industry reduces the impact on the environment during synthesis 1535-73-5, name is 3-Trifluoromethoxyaniline, I believe this compound will play a more active role in future production and life.

To a 100 mL one-necked flask was added compound Q6 (100 mg, 0.29 mmol), EDCI (113.1 mg, 0.59 mmol), HOBt (79.7 mg, 0.59 mmol), DMAP (144.2 mg, 1.18 mmol) and m-trifluoromethoxyaniline (10 mL) was added, and the mixture was stirred at room temperature for 12 h. The reaction was complete with TLC, and 20 mL of water was added. The aqueous phase was extracted with DCM (20 mL x 3) and the organic phases were combined. , Saturated NaCl solution (30 mL), dried over anhydrous NaSO4 and concentrated under reduced pressure and subjected to silica gel column chromatography (PE: EA = 2: 1) to give compound Q20 (120 mg white solid, 82percent).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Trifluoromethoxyaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; East China Normal University; Qiu Wenwei; Yi Zhengfang; Yang Lianfang; Xing Yajing; Liu Mingyao; Xie Jia; (25 pag.)CN106928095; (2017); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 111-95-5 as follows. category: ethers-buliding-blocks

1-fluoro-4-nitrobenzene (133 mg, 0.94 mmol), bis(2-methoxyethyl)amine (125 mg, 0.94 mmol) and potassium carbonate (143 mg, 1.04 mmol) were stirred in DMSO (2 mL) at 70 C. for 24 hours. The reaction mixture was poured into water, and the aqueous phase was extracted with ethyl acetate (2×25 mL). The combined organic extracts were washed with brine, dried over magnesium sulfate, filtered and concentrated to provide the title compound. MS (ESI+) m/e 255.1 (M+H)+.

According to the analysis of related databases, 111-95-5, the application of this compound in the production field has become more and more popular.

Reference:
Patent; ABBOTT LABORATORIES; US2012/220572; (2012); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 19500-02-8, name is 3-Methoxy-2-methylaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Formula: C8H11NO

Example 2: Preparation ofN-[17-[2-(3-isopropylpyrazol-l-yl)-7-methoxy-8- methylquinolin-4-yloxy]- 13-methyl-2,14-dioxo-3,13-diazatricyclo[13.3.0.04’6]octadec- 7-ene -4-carbonyl] (dimethylamino)sulfonamide (29) .; Step 1: Synthesis of ethyl 4-hydroxy-7-methoxy-8-methylquinoline-3-carboxylate (11).; 10 EPO Diethyl ethoxymethylenemalonate (17.2 g, 79.6 mmol) was added to 2-methyl-m- anisidine (8.4 g, 61.2 mmol) (exothermic reaction). Then, diethylether (100 mL) was added and the mixture was stirred overnight at room temperature. The solvent was evaporated and the residue re-dissolved in ether (50 mL), filtered, washed with heptane and dried to give 12 g of an intermediate. This intermediate was added portion wise to diphenyl ether (50 mL) pre-heated at 230 0C. The reaction mixture was successively heated to 250 0C for 1.5 h, cooled at room temperature, and diluted with heptane (200 mL). The precipitate was filtered off, and successively washed with heptane and ether to give 9.2 g (57.5 percent) of the target product 11 as a yellow powder: m/z = 262 (M + H)+.

The synthetic route of 19500-02-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TIBOTEC PHARMACEUTICALS LTD.; MEDIVIR AB; WO2007/14925; (2007); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 321-28-8, name is 1-Fluoro-2-methoxybenzene, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C7H7FO

A solution of 2-fluoro-anisole (6.0 g, 47 mmol) and N, N, Nu’, ‘- tetramethylethylenediamine in THF (250 mL) was cooled to – 78 C and treated dropwise with sec -butyl lithium (1.3 M in cyclohexane, 38 mL, 49 mmol). The mixture was stirred for 2 h at – 78 C and then treated with dimethylformamide (3.6 mL, 47 mmol). Stirring continued for an additional 10 min and then acetic acid (20 mL) followed by water (150 mL) was added to the mixture. The mixture was warmed to ambient temperature and then diluted with ethyl acetate. The organic layer was washed with 1 M HCI, and brine. The organic layer was dried over Na2S04 and concentrated under reduced pressure to give crude 2-flouro-3-methoxybenzaldehyde (4.7 g, yield 64%) as a yellow solid. NMR (400 MHz, CDC13) (ppm) 10.40 (s, 1H), 7.45-7.40 (m, 1H), 7.23-7.18 (m, 2H), 3.94 (s, 3H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 321-28-8.

Reference:
Patent; ANACOR PHARMACEUTICALS, INC.; AKAMA, Tsutomu; JARNAGIN, Kurt; ZHANG, Yong-kang; ZHOU, Yasheen; PLATTNER, Jacob, J.; SULLIVAN, David, C.; WO2015/13318; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 38336-04-8 as follows. COA of Formula: C9H13NO

General procedure: Ethyl 2-(4-chloro-3-nitrophenyl)-2-methylpropanoate (3a)(16.15 g, 0.0594 mol), 4 (27.77 g, 0.149 mol), K2CO3 (28.69 g,0.208 mol), KI (0.99 g, 5.94 mmol), TBAB (1.91 g, 5.94 mmol) and150 mL DMSO were added into a round-bottomed flask. The mixturewas heated to 120 C for 24 h then cooling to room temperature.The reaction mixture was diluted with saturated NH4Claqueous solution (250 mL) and extracted with CH2Cl2 (450 mL).The combined organic layer was washed with brine (300 mL), driedover anhydrous sodium sulfate, filtered, and concentrated in vacuo.The residue was purified by silica gel column chromatography (PE:EtOAc = 4:1) to give compound 5a (15.82 g) as yellow oil in 69%yields.

According to the analysis of related databases, 38336-04-8, the application of this compound in the production field has become more and more popular.

Reference:
Article; Chen, Dongxing; Shi, Jinyu; Liu, Jing; Zhang, Xueying; Deng, Xiaoying; Yang, Yanyan; Cui, Shuang; Zhu, Qihua; Gong, Guoqing; Xu, Yungen; Bioorganic and Medicinal Chemistry; vol. 25; 2; (2017); p. 458 – 470;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Some common heterocyclic compound, 1836-62-0, name is 2-(2-Methoxyphenoxy)ethylamine, molecular formula is C9H13NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 2-(2-Methoxyphenoxy)ethylamine

In a dry reaction flask, 4-(2,3-epoxy propoxy) carbazole (50 gm.0.21 moles), 2-(2-methoxy phenoxy) ethyl amine (75.5 gm. 0.45 moles) and 500 ml of ethyl acetate were charged and heated to reflux for about 24 hours. After completion of the reaction, solvent was distilled off from the reaction mixture to obtain 125 gm of the residue. Ethyl acetate (312 ml) and water (312 ml) were added to the residue and stirred for about 15 minutes. Reaction mixture pH was adjusted to about 3 with 40 ml (0.68 moles) of phosphoric acid at room temperature. Reaction mixture was stirred for about 11 hours and filtered the solid to obtain carvedilol phosphate. The wet solid thus obtained was slurred in 325 ml of acetone at 26 0C for about 30 minutes. The solid was filtered and dried to obtain the title compound. Yield: 50 gm

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1836-62-0, its application will become more common.

Reference:
Patent; SHODHANA LABORATORIES LIMITED; WO2009/122425; (2009); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 458-52-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 458-52-6, name is 2-Fluoro-4-methoxyaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 13 Benzamide, 2-amino-4,6-dimethoxy-N-(2-fluoro-4-methoxyphenyl) To a mixture of 200 mg (1.42 mmol)of 4-amino-3-fluoroanisole and 1M sodium bis(trimethylsilyl)amide (4.39 mmol) in THF solution at room temperature under nitrogen atmosphere, 320 mg (1.42 mmol) of the isatoic anhydride prepared in Example 5, was added followed by the addition of 2 mL of N,N-dimethylacetamide. The suspension was heated at 90° C. for 4 hours. After completion of the reaction, as monitored by HPLC, the mixture was cooled to room temperature, diluted with EtOAc and 1N HCl, and the resulting layers were separated. The aqueous layer was extracted with EtOAc twice, and the combined organic extracts were washed with water, saturated NaHCO3, brine, dried over Na2SO4 and concentrated. The residue was dissolved in CH2Cl2 and chromatographed on silica using 30percent EtOAc in hexane as eluent. A total of 220 mg (48percent) of a yellow solid was obtained. C16H17FN2O4=320 g/mol; ESI-LC/MS (M+H)+=321.1; 1H NMR (400 MHz, CDCl3): delta10.0 (1H, s), 8.26 (1H, t, J=8.8 Hz), 6.70 (2H, m), 6.42 (2H, broad), 5.85 (1H, d, J=2.6 Hz), 5.82 (1H, d, J=2.6 Hz), 3.94 (3H, s), 3.79 (6H, s).

The synthetic route of 2-Fluoro-4-methoxyaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Gungor, Timur; Corte, James R.; US2003/220227; (2003); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem