Tag: M.W=100-200

Synthetic Route of 2688-84-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2688-84-8, name is 2-Phenoxyaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

1L into a round bottom flask 2-phenoxyaniline (25.0, 0.135mol) and hydrochloric acid, 30ml, 150ml water, cooled to 0 degrees and the mixture was stirred for 1 hour. After the addition the reaction mixture of sodium (11.2g, 0.162mol) in 75ml aqueous solution of the same temperature and the mixture was stirred for one hour. Potassium iodide (44.8g, 0.270mol) and note the temperature of the reaction solution was added dropwise not exceed 5 was added dropwise to 75ml of an aqueous solution. Stirred for 5 hours at room temperature after the completion of the reaction haejugo After washing with sodium sayi oh sulfate aqueous solution was extracted with ethyl acetate and water. The organic layer was separated and concentrated under reduced pressure and purified by column chromatography to obtain a intermediate 5-a> (22.6g, 56.5%)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Phenoxyaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SFC CO LTD; PARK, SEOK BAE; SONG, JU MAN; LEE, YUR IM; KIM, HEE DAE; PARK, SANG WOO; JEONG, KYUNG SEOK; CHA, SOON WOOK; (96 pag.)KR2015/130206; (2015); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 645-36-3, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 645-36-3, name is 2,2-Diethoxyethanamine, This compound has unique chemical properties. The synthetic route is as follows.

A solution of the amino-acetaldehyde diethyl acetal (13.16 g, 99 mmol) in ether (35 mL) is added to a suspension of CNBr (10.47 g, 99 mmol) in hexane (35 mL) at room temperature. The reaction mixture is stirred at room temperature overnight. The solid is removed by filtration and washed with ether. The combined filtrate is concentrated. Purification by column chromatography (silica gel, eluding with dichloromethane to 4% methanol in dichloromethane, gradient) affords N-(2,2-Diethoxyethyl)carbodiimide (Rf: 2.70, 4% methanol in dichloromethane, stain with 10% ethanolic molybdatophosphoric acid): 1H NMR 400 MHz (CDCl3) delta 4.58 (t, J=5.2 Hz, 1H), 3.77-3.69 (m, 2H), 3.65 (br, s, 1H), 3.60-3.52 (m, 2H), 3.16 (t, J=5.6 Hz, 1H), 1.23 (t, 6H, J=6.8 Hz).

The chemical industry reduces the impact on the environment during synthesis 2,2-Diethoxyethanamine. I believe this compound will play a more active role in future production and life.

Reference:
Patent; IRM LLC; US2008/188483; (2008); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 7664-66-6, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 7664-66-6 name is 4-Isopropoxyaniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

The compound obtained in Step 5 (19 mg) was dissolved in dioxane (1 mL), 4 isopropoxyphenylaniline (12mg) and 4N hydrochloric acid dioxane (64muL), and the mixture was stirred for 20 minutes in a microwave irradiation under 180 . The reaction solution was extracted three times with chloroform after adding a saturated aqueous sodium hydrogen carbonate solution, and the organic layer was concentrated after dried over sodium sulfate. The resulting residue to give the title compound purified by silica gel column chromatography (13mg, 57%).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Isopropoxyaniline, and friends who are interested can also refer to it.

Reference:
Patent; TAIHO PHARMACEUTICAL COMPANY LIMITED; MINAMIGUCHI, KAZUHISA; OKAJIMA, SHIGEO; AOKI, SHINICHI; ASAI, MASANORI; ASAI, TAKAHIRO; YAMANAKA, HIROYOSHI; DOHI, SUGURU; (149 pag.)JP5851663; (2016); B1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

910251-11-5, name is Potassium trifluoro(methoxymethyl)borate, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. COA of Formula: C2H5BF3KO

Under an argon atmosphere a mixture of 70 mg of tert-butyl 10-bromo-8-cyclopropyl-3,4,7,8-tetrahydro-1H-[1,4]diazepino[6,7,1-ij]quinoline-2(6H)-carboxylate (0.172 mmol, 1.00 eq) from step 8.2, 52.2 mg of potassium trifluoro (2-methoxymethyl)borate (0.344 mmol, 2.00 eq), 168 mg of cesium carbonate (0.516 mmol, 3.00 eq), 1.43 mg of Pd(OAc)2 (0.006 mmol, 0.04 eq) and 5.73 mg of X-Phos (0.012 mmol, 0.07 eq) in degassed dioxane (4 mL) and water (0.5 mL) was heated in a microwave at 130 C. for 40 h. Then the mixture was extracted with DCM and the organic phase was washed with water and dried over MgSO4, filtrated and solvent was evaporated to yield the title compound. ESI-MS: m/z (%): 373.30 (100, [M+H]+).

The synthetic route of 910251-11-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AbbVie Deutschland GmbH & Co. KG; BACKFISCH, Gisela; BAKKER, Margaretha Henrica Maria; BLAICH, Guenter; BRAJE, Wilfried; DRESCHER, Karla; ERHARD, Thomas; HAUPT, Andreas; KOOLMAN, Hannes; LAKICS, Viktor; LINSENMEIER, Anna; MACK, Helmut; PETER, Raimund; RELO, Ana Lucia; US2015/259343; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 366-99-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 366-99-4 as follows.

2-pentanone (17.2 g, 200 mmol), Acetic acid (1.8 g, 30 mmol), and Sodium triacetoxyborohydnde (6.36 g, 30 mmol) were added to a solution of 3-Fluoro-4-methoxyaniline (2.82 g, 20 mmol) in DCM (120 mL) and the mixture was stined at RT for 12 hr. Water was added to quench the reaction and the mixture was extracted with DCM. The solvent was removed under and the residue was purified by silica gel chromatography to afford 3-Fluoro-4-methoxy-N-(pentan-2-yl)aniline(2.1 g, 50percent yield). MS m/z=212 [M+H].

According to the analysis of related databases, 366-99-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; JIANGSU ASCENTAGE BIOMED DEVELOPMENT INC.; CHEN, Jianyong; ZHOU, Yunlong; WANG, Shaomeng; GUO, Ming; YANG, Dajun; JIAO, Lingling; JING, Yu; QIAN, Xu; LIU, Liu; BAI, Longchuan; YANG, Chao-Yie; MCEACHERN, Donna; WO2015/127629; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 1836-62-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1836-62-0, name is 2-(2-Methoxyphenoxy)ethylamine belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Corresponding 2-(aryloxymethyl)oxiranes (5 mmol, 1 equiv) and amines (7.5 mmol, 1.5 equiv) were dissolved in 30 mL i-PrOH. The reaction was purged with argon 3 times and stirred at reflux for 5 h, andthen the mixture was cooled to room temperature and added AcOEt.After washing with brine 3 times, the organic layer was dried overanhydrous Na2SO4, filtered, and evaporated in vacuo. Purification ofthe crude residue by column chromatography on silica gel yielded target compounds.

The synthetic route of 2-(2-Methoxyphenoxy)ethylamine has been constantly updated, and we look forward to future research findings.

Reference:
Article; Chang, Qi; Chen, Zhuo; Hu, Gaoyun; Hu, Liqing; Li, Qianbin; Long, Jing; Bioorganic and medicinal chemistry; vol. 28; 9; (2020);,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 349-55-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 349-55-3, name is 3-Methoxy-5-(trifluoromethyl)aniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

1 3-(3-Methoxy-5-trifluoromethyl-phenylamino)-2-methylsulfonyl-3-methylsulfanyl-propenenitrile To a solution of 3-methoxy-5-trifluoromethyl-anilin(1.50 g, 7.8 mmol) in dry ethyl acetate (10 ml) thiophosgene (0.20 ml, 2.6 mmol) was added dropwise. After stirring for 1.5 h at 75 C. the reaction mixture was cooled on an ice bath and then filtered. The filtrate was concentrated. The residue was dissolved in dry acetone (5 ml) and added to a suspension of methanesulfonylacetonitrile (0.34 g, 2.6 mmol) and dry potassium carbonate (0.72 g, 5.2 mmol) in dry acetone (5 ml). The resulting mixture was stirred at room temperature under nitrogen for 19 h, and then filtered. To the filtrate methyl iodide (0.49 ml, 7.8 mmol) was added. The mixture was stirred at room temperature for 1.5 h. The reaction mixture was concentrated and the residue was taken up into dichloromethane and water. The organic layer was washed with water (2X), dried (sodium sulfate) and concentrated. The residue was recrystallized from ethyl acetate to give 0.70 g (73%) of the title compound. 1H NMR (200 MHz, CDCl3): delta=2.28 (s, 3H), 3.22 (s, 3H), 3,87 (s, 3H), 7.0 (t, 1H), 7.05 (br s, 1H), 7.14 (br s, 1H), 9.8 (br s, 1H); El SP/MS: 366 (M-2).

The synthetic route of 3-Methoxy-5-(trifluoromethyl)aniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Hansen, John Bondo; Tagmose, Tina Moller; Mogensen, John Patrick; Dorwald, Florencio Zaragoza; Jorgensen, Anker Steen; US2001/25111; (2001); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3616-56-6, name is 2,2-Diethoxy-N,N-dimethylethanamine, A new synthetic method of this compound is introduced below., Quality Control of 2,2-Diethoxy-N,N-dimethylethanamine

Example 2 (E)-4-Dimethylamino-But-2-Enoic acid-[4-(3-Chloro-4-Fluoro-Phenylamino)-7-((S)-Tetrahydrofuran-3-Yloxy)-Quinazolin-6yl]-Amide 5.6 litres of 30percent hydrochloric acid (53.17 mol) are added to 4.4 litres of water. Then 4.28 kg of 95percent (dimethylamino)-acetaldehyde-diethylacetal (26.59 mol) are added dropwise within 20 minutes at 30° C. The reaction solution is stirred for 8 hours at 35° C. stirred, cooled to 5° C. and stored under argon. This solution is referred to as solution B. 4.55 kg (68.06 mol) of potassium hydroxide are dissolved in 23.5 litres of water and cooled to -5° C. This solution is referred to as solution C. 5.88 kg (10.63 mol) of diethyl ((4-(3-chloro-4-fluoro-phenylamino)-7-(tetrahydrofuran-3-yloxy)-quinazoline-6-ylcarbamoyl)-methyl)-phosphonate and 0.45 kg of lithium chloride (10.63 mol) are placed in 23.5 litres of tetrahydrofuran and cooled to -7° C. The cold solution C is added within 10 minutes. Then solution B is added at -7° C. within 1 hour. After stirring for a further hour at -5° C. the reaction mixture is heated to 30° C. and combined with 15 litres of water. After cooling to 3° C. the suspension is suction filtered, the precipitate is washed with water and dried. Yield: 5.21 kg of crude product, 100percent, water content: 6.7percent The crystallisation of the crude product is carried out with butyl acetate/methylcyclohexane Yield: 78percent purity HPLC 99.4Fl percent, water content 5.4percent

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Boehringer Ingelheim International GmbH; US2005/85495; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 592-55-2, name is 1-Bromo-2-ethoxyethane, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 592-55-2, COA of Formula: C4H9BrO

A. 2-Ethoxyethoxynitrobenzene 2-Nitrophenol (91.0 g. 0.65 mole), 2-bromoethyl ethyl ether (100.0 g. 0.65 mole), anhydrous potassium carbonate (9.0 g, 0.72 mole) and acetone (1 liter) were refluxed for 65 hours. The reaction mixture was filtered, and the acetone removed by rotary evaporation. The residue was partitioned between 200 ml. of dichloromethane and 100 ml water. The organic phase was further washed with 200 ml. of 10% sodium hydroxide followed by 100 cc of water. The product (58.0 g) was obtained in 42% yield by a vacuum distillation (100-120 C./0.5 mm).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Bromo-2-ethoxyethane, and friends who are interested can also refer to it.

Reference:
Patent; GAF Corporation; US4178168; (1979); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 767-91-9, name is 2′-Methoxyphenyl acetylene, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C9H8O

Methyl 4-hydroxy-3-iodobenzoate (0.111 g, 0.40 mmol, 2′-methoxyphenyl acetylene (0.052 ml, 0.40 mmol) 1,1,3,3-tetramethylguanidine (0.502 mL, 4.00 mmol) bis(triphenylphosphine)palladium(II)chloride (0.028 g, 0.04 mmol) and copper(I) iodide (1.36 muL, 0.04 mmol) were dissolved in N,N-dimethylformamide (5 mL). The reaction mixture was heated at 50 C. under an atmosphere of argon over night and the solvent was evaporated. Purification by column chromatography, using heptane/ethyl acetate (9:1) as the eluent gave 0.064 g (57% yield) of the title compound.1H NMR (400 MHz, CDCl3), delta ppm 8.34 (d, 1H), 8.07 (dd, 1H), 8.01 (dd, 1H), 7.53 (d, 1H), 7.40 (s, 1H), 7.33-7.39 (m, 1H), 7.06-7.14 (m, 1H), 7.02 (d, 1H), 4.01 (s, 3H), 3.96 (s, 3H).

According to the analysis of related databases, 767-91-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; AstraZeneca AB; US2009/131468; (2009); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem