Tag: M.W=100-200

Application of 41789-95-1, These common heterocyclic compound, 41789-95-1, name is 1-(3-Methoxyphenyl)-N-methylmethanamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Amine (1.2 equiv) and 3-bromotoluene (1 equiv) were added to an aqueous solution of TPGS-750-M-2% (1 mL/mmol). The mixture was degassed by bubbling Argon in through (5 min). NaO-t-Bu (1.5 equiv), of [(allyl)PdCl]2 (1.1%) and cBridp (4.4%) were added together to the previous solution. The mixture was stirred (at 1200 rpm) at 50 C (2-24 h). Volatiles were evaporated and the crude residue was purified by chromatographic column on silica gel using ethyl acetate and cyclohexane as solvent.

Statistics shows that 1-(3-Methoxyphenyl)-N-methylmethanamine is playing an increasingly important role. we look forward to future research findings about 41789-95-1.

Reference:
Article; Salome, Christophe; Wagner, Patrick; Bollenbach, Maud; Bihel, Frederic; Bourguignon, Jean-Jacques; Schmitt, Martine; Tetrahedron; vol. 70; 21; (2014); p. 3413 – 3421;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 20781-20-8, name is (2,4-Dimethoxyphenyl)methanamine, A new synthetic method of this compound is introduced below., category: ethers-buliding-blocks

1-(2,4-Dimethoxyphenyl)methanamine (20.3 mL, 135 mmol) was added to asolution of C4 (10.3 g, 90.2 mmol) in methanol (200 mL), and the reaction mixture was stirred for 1 hour at room temperature. It was then cooled to -78 C; lithium borohydride solution (2 M in tetrahydrofuran, 45.1 mL, 90.2 mmol) was added drop-wise, and stirring was continued at -78 C for 2 hours. After slowly warming to room temperature overnight, the reaction mixture was quenched via careful addition of saturated aqueous sodium bicarbonate solution. Ethyl acetate (250 mL) and sufficient water to solubilize the precipitate were added, and the aqueous layer was extracted with ethyl acetate; the combined organic layers were dried over magnesium sulfate, filtered, and concentratedin vacuo. Silica gel chromatography (Gradient: 0% to 5% methanol in dichloromethane)provided the product as a colorless oil (10.4 g). Similar purification of mixed fractionsafforded additional product (3.7 g). Combined yield: 14.1 g, 53.1 mmol, 59%. H NMR(400 MHz, CDCI3) 7.13 (d, J=8.0 Hz, 1H), 6.42-6.47 (m, 2H), 3.99 (ddd, J=11.6, 4.6,1.5 Hz, 1H), 3.82 (5, 3H), 3.80 (5, 3H), 3.76 (5, 2H), 3.36-3.45 (m, 2H), 2.63-2.73 (m,1H), 1.85-1.92 (m, 1H), 1.78-1.85 (m, 1H), 1.38 (dddd, J=13, 12, 11,4.7 Hz, 1H), 1.20 (d, J=6.2 Hz, 3H), 1.10(ddd, J=11, 11, 11 Hz, 1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; PFIZER INC.; BRODNEY, Michael Aaron; CHAPPIE, Thomas Allen; CHEN, Jinshan Michael; COE, Jotham Wadsworth; COFFMAN, Karen Jean; GALATSIS, Paul; GARNSEY, Michelle Renee; HELAL, Christopher John; HENDERSON, Jaclyn Louise; KORMOS, Bethany Lyn; KURUMBAIL, Ravi G.; MARTINEZ-ALSINA, Luis Angel; PETTERSSON, Martin Youngjin; REESE, Matthew Richard; ROSE, Colin Richard; STEPAN, Antonia Friederike; VERHOEST, Patrick Robert; WAGER, Travis T.; WARMUS, Joseph Scott; ZHANG, Yuan; (193 pag.)WO2018/163066; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 366-99-4, name is 3-Fluoro-4-methoxyaniline, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C7H8FNO

Under room temperature, will 3-fluoro-4-anisidine (21.0 g, 0 . 15 mol) adding water in (100 ml). To the stirring mixture of lowering the temperature to -5 to 0 °C. To the obtained sequentially adding in a mixture of concentrated hydrochloric acid (45 ml), sodium nitrite solution (70 ml), 2-chloro-3-oxo butyric acid ethyl ester (24.7 g, 0 . 15 mol) of ethanol solution (150 ml) and sodium acetate (36.9 g, 0 . 45 mole) aqueous solution (150 ml). After the completion of the dropping, the obtained mixture of low-temperature stirring 0.5 hours. Furthermore, the obtained mixture to room temperature, stirring for 6 hours, a solid precipitated in the reaction process. After the completion of the reaction, the obtained by filtering the mixture. The filter cake obtained by vacuum drying, the silica gel column chromatography (PE:EA=10:1) product is obtained by purification of 36.5 g (yield: 88.6percent).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 366-99-4.

Reference:
Patent; CSPC Weisheng Pharmaceutical Technology (Shijiahuang) Co., Ltd.; Shi, Ying; Gao, Qingzhi; Mi, Yi; Wang, Xuliang; (129 pag.)CN105384739; (2016); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 366-99-4,Some common heterocyclic compound, 366-99-4, name is 3-Fluoro-4-methoxyaniline, molecular formula is C7H8FNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 62; Synthesis of N,N’-dicyclopropyl-N-(3-fluoro-4-methoxy-phenyl)-1,3,5-triazine-2,4,6-triamine (157); To cyanuric chloride (0.368 g, 2 mmol) in CH3CN at about -20° C. was added 3-fluoro-p-anisidine (0.28 g, 2 mmol) in CH3CN followed by the addition of DIEA (0.39 mL, 2.2 mmol) and stirred for about I hour. The reaction mixture was then stirred at room temperature for about 1 hour. Then cyclopropylamine (1.39 mL, 20 mmol) and DIEA (0.39 mL, 2.2 mmol) were added and the reaction mixture was stirred overnight at rt. The reaction mixture was worked up as usual, diluted with ethyl acetate and washed with brine. The organic layer was separated and dried over sodium sulfate, filtered, concentrated under reduced pressure, and compound 157 was purified by silica gel column chromatography (200 mg, 30percent), mp 91-92° C.; HPLC: Inertsil ODS-3V C18, 40:30:30 [KH2PO4 (0.01 M, pH 3.2):CH3OH:CH3CN], 264 nm, Rt 8.6 min, 99.1percent purity; MS (ESI): m/z 331(M+H, 100), 305 (0.8), 151 (0.3).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3-Fluoro-4-methoxyaniline, its application will become more common.

Reference:
Patent; Timmer, Richard T.; Alexander, Christopher W.; Pillarisetti, Sivaram; Saxena, Uday; Yeleswarapu, Koteswar Rao; Pal, Manojit; Reddy, Jangalgar Tirupathy; Krlshna Reddy, Velagala Venkata Rama Murali; Sridevi, Bhatlapenumarthy Sesha; Kumar, Potlapally Rajender; Reddy, Gaddam Om; US2004/209880; (2004); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 150-78-7,Some common heterocyclic compound, 150-78-7, name is 1,4-Dimethoxybenzene, molecular formula is C8H10O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 2: Preparation of 2,5-dibromo-1 ,4-dimethoxybenzene (2); [00103] In a one liter round-bottom flask, a solution of bromine (35.2 g, 220 mmol) in chloroform (50 ml) was added dropwise to a solution of 1 ,4- dimethoxybenzene (13.8 g, 100 mmol) in chloroform (400 ml) under 00C. After stirring for 3 hours, 100 ml of saturated Na2CO3 solution was added. The organic layer was washed with water, brine, and dried over sodium sulfate. The solvent was removed on a rotary evaporator and the residue was performed recrystallization from ethanol to afford pure 2,5-dibromo-1 ,4- dimethoxybenzene (25.8 g, 85%). 1HNMR (CDCI3) 57.128 (s, 2 H), 3.873 (s, 6 H).

The synthetic route of 150-78-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; AGENCY FOR SCIENCE, TECHNOLOGY AND RESEARCH; NATIONAL UNIVERSITY OF SINGAPORE; WO2006/93467; (2006); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 6851-80-5, The chemical industry reduces the impact on the environment during synthesis 6851-80-5, name is 1-(2-Methoxyphenyl)-N-methylmethanamine, I believe this compound will play a more active role in future production and life.

a N-(2-Methoxybenzyl)–N-(methyl)aminoacetonitrile A mixture of 2.0 g (13.2 mmole) of N-methyl-2methoxybenzylamine, 0.99 g (13.2 mmole) of chloroacetonitrile, and 2.80 g (26.5 mmole) of powdered sodium carbonate was stirred in 30 mL of acetone at room temperature for 4 days. The mixture was concentrated in vacuo and the residue purified by flash chromatography on 130 g of silica gel eluding with 83:17 hexanes: ethyl acetate to give 2.2g (87%) of an oil. 1 H NMR (CDCl3, 400 MHz, ppm): delta 2.43 (s, 3H), 3.48 (s, 2H), 3.62 (s, 2H), 3.83 (s, 3H), 6.88 (d, 1H), 6.93 (t, 1H), 7.2-7.3 (m, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-(2-Methoxyphenyl)-N-methylmethanamine, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Merck & Co., Inc.; US5610165; (1997); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 1484-26-0, These common heterocyclic compound, 1484-26-0, name is 3-Benzyloxyaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solutionof 3-(benzyloxy)aniline 10b (1.0 equiv.) in ethylformate (3 mL),catalytic amount of pTsOH monohydrate was added. The reactionmixture was stirred at rt for 3 days and the resulting mixture wasextracted with ethyl acetate. Organic layers were collected, washedwith water and brine, dried over anhydrous MgSO4 and evaporatedgiving the product 11b as white solid in 80percent yield.xNMR: mixture of two rotamers (approx. 1:1) 1H (600 MHz,CDCl3): d 8.67 (d, J 10.0 Hz, 1H), 8.32 (s, 1H), 7.97e7.67 (m, 22H),5.05 (s, 2H), 5.03 (s, 2H).

Statistics shows that 3-Benzyloxyaniline is playing an increasingly important role. we look forward to future research findings about 1484-26-0.

Reference:
Article; Surmiak, Ewa; Neochoritis, Constantinos G.; Musielak, Bogdan; Twarda-Clapa, Aleksandra; Kurpiewska, Katarzyna; Dubin, Grzegorz; Camacho, Carlos; Holak, Tad A.; Doemling, Alexander; European Journal of Medicinal Chemistry; vol. 126; (2017); p. 384 – 407;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 2734-70-5, name is 2,6-Dimethoxyaniline, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 2734-70-5, Safety of 2,6-Dimethoxyaniline

To a solution of pentanenitrile (310 mg, 3.7 mmol) and 2-methoxy-6-methylaniline (518 mg, 3.40 mmol) in toluene (13 mL) at RT was added a solution of trimethylaluminum in toluene (1.7 mL, 3.4 mmol) at 0 °C. The reaction mixture was heated at 110 °C for 1 h. The cooled reaction mixture was quenched by the addition of a saturated solution of Rochelle’s salt (5 mL) and stirred at RT for 30 min. The reaction mixture was extracted with EtOAc (3×20 mL). The combined organic portion was washed with brine, dried over MgS04, filtered and concentrated under reduced pressure. The residue was purified by silica gel chromatography elution with 20-100percent EtOAc hexanes to give Compound la (450 mg, 56percent) as a brown oil. LCMS (Method D) retention time = 0.65 min, m/z = 237.1 (M+H)+. NMR (500MHz, chloroFORM-d)? 6.88 (t, J=8.4 Hz, 1H), 6.51 (d, J=8.3 Hz, 2H), 4.68 – 3.89 (m, 2H), 3.71 (s, 6H), 2.33 (br. s., 2H), 1.84 -1.52 (m, 2H), 1.49 -1.24 (m, 2H), 0.89 (br. s., 3H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; TORA, George, O.; FINLAY, Heather; JIANG, Wen; MENG, Wei; ZHANG, Xiaojun; (303 pag.)WO2017/218633; (2017); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 349-65-5, The chemical industry reduces the impact on the environment during synthesis 349-65-5, name is 2-Methoxy-5-(trifluoromethyl)aniline, I believe this compound will play a more active role in future production and life.

5-(Trifluoromethyl)-2-methoxyaniline was treated with CDI, followed by 4-(1-oxoisoindolin-5-yloxy)aniline according to Method C2d to afford the urea. Entry 26: 4-Hydroxyacetophenone was reacted with 4-fluoronitrobenzene according to Method A13, Step 1 to give 4-(4-acetylphenoxy)nitrobenzene.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Methoxy-5-(trifluoromethyl)aniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Riedl, Bernd; Dumas, Jacques; Khire, Uday; Lowinger, Timothy B.; Scott, William J.; Smith, Roger A.; Wood, Jill E.; Monahan, Mary-Katherine; Natero, Reina; Renick, Joel; Sibley, Robert N.; US2001/11135; (2001); A1;; ; Patent; BAYER CORPORATION; US2003/181442; (2003); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 702-24-9, These common heterocyclic compound, 702-24-9, name is 4-Methoxy-N-methylbenzylamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Place ethyl 6,8-dichloroimidazo[ 1 ,2-bj pyridazine-3 -carboxylate (3 g, 11.54mmol), 1-(4-methoxyphenyl)-N-methylmethanamine (2.267 g, 15.00 mmol), and N,NDiisopropylethylamine (DIPEA) (4.03 mL, 23.07 mmol) in a 100 mL round bottle flask along with THF (15 mL). It was sealed and heated to 80°C for 6 hours. The reactionmixture was concentrated and purified with silica gel chromatography. The product came out when eluting with 35percent ethyl acetate in hexane. The fractions containing product was collected and concentrated to provide the product (3.7 g, 9.87 mmol, 86percent yield, 100percentpurity). LC retention time 1.06 mm [Al. MS (ES+) m/z: 375 (MH). ?H NMR (400MHz, CHLOROFORM-d):8.14 – 8.09 (m, 1H), 7.20 – 7.13 (m, 2H), 6.89 – 6.83 (m, 2H), 6.11 (s, 1H), 5.49 (s, 2H),4.44 (q, J=7.2 Hz, 2H), 3.84 – 3.77 (m, 3H), 3.17 (s, 3H), 1.42 (t, J=7.2 Hz, 3H)

Statistics shows that 4-Methoxy-N-methylbenzylamine is playing an increasingly important role. we look forward to future research findings about 702-24-9.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; WEINSTEIN, David S.; DUNCIA, John V.; SPERGEL, Steven H.; (76 pag.)WO2018/93968; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem