Month: November 2022

Catalytic hydrogenolysis of lignin β-O-4 aryl ether compound and lignin to aromatics over Rh/Nb₂O₅ under low H₂ pressure was written by Guan, Weixiang;Chen, Xiao;Hu, Haoquan;Tsang, Chi-Wing;Zhang, Jie;Lin, Carol Sze Ki;Liang, Changhai. And the article was included in Fuel Processing Technology in 2020.Computed Properties of C13H12O2 The following contents are mentioned in the article:

The increasing risk of fossil fuels depletion due to surging energy demand has accelerated the search of alternative renewable sources. Lignin, one of the major components of lignocellulosic biomass, is the only abundant renewable natural resource for aromatic compounds In this work, the effects of metals and process parameters were discussed via the catalytic hydrogenolysis of β-O-4 lignin model compound, 2-phenethyl Ph ether. The best results were obtained over Rh/Nb₂O₅ with an overall conversion of 99.3% and exceptional selectivity of 98.9% to aromatic products when the hydrogenolysis was carried out at 260° and 0.1 MPa H₂ for 4 h. The high efficiency is mainly attributed to the cooperation between Rh and NbOx at the perimeter sites, in which Rh particles are responsible for the dissociation of H₂ and NbOx for activating C-O bonds. With respect to depolymerize of ash wood lignin, the liquid products were mostly aromatics over Rh/Nb₂O₅ under 0.1 MPa H₂. The results achieved in this work provide a promising prospect towards valorization of lignin into production of valuable aromatic compounds under low hydrogen pressure. This study involved multiple reactions and reactants, such as 4-Benzyloxyphenol (cas: 103-16-2Computed Properties of C13H12O2).

4-Benzyloxyphenol (cas: 103-16-2) belongs to ethers. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Liquid esters of low volatility serve as softening agents for resins and plastics. Esters also include many industrially important polymers. Polymethyl methacrylate is a glass substitute sold under the names Lucite and Plexiglas; polyethylene terephthalate is used as a film (Mylar) and as textile fibres sold as Terylene, Fortrel, and Dacron.Computed Properties of C13H12O2

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Predicting relative efficiency of amide bond formation using multivariate linear regression was written by Haas, Brittany C.;Goetz, Adam E.;Bahamonde, Ana;McWilliams, J. Christopher;Sigman, Matthew S.. And the article was included in Proceedings of the National Academy of Sciences of the United States of America in 2022.Formula: C3H9NO The following contents are mentioned in the article:

Herein, the development of statistical models correlating measured rates to phys. organic descriptors to enable the prediction of reaction rates for untested carboxylic acid/amine pairs was reported. The key to the success of this endeavor was the development of an end-to-end data science-based work flow to select a set of coupling partners that were appropriately distributed in chem. space to facilitate statistical model development. By using a parameterization, dimensionality reduction, and clustering protocol, a training set was identified. Reaction rates for a range of carboxylic acid and primary alkyl amine couplings utilizing carbonyldiimidazole (CDI) as the coupling reagent were measured. The collected rates span five orders of magnitude, confirming that the designed training set encompasses a wide range of chem. space necessary for effective model development. Regressing these rates with high-level d. functional theory (DFT) descriptors allowed for identification of a statistical model wherein the mol. features of the carboxylic acid are primarily responsible for the observed rates. Finally, out-of-sample amide couplings are used to determine the limitations and effectiveness of the model. This study involved multiple reactions and reactants, such as 2-Methoxyethylamine (cas: 109-85-3Formula: C3H9NO).

2-Methoxyethylamine (cas: 109-85-3) belongs to ethers. Esters are widespread in nature and are widely used in industry. In nature, fats are in general triesters derived from glycerol and fatty acids. Esters are responsible for the aroma of many fruits, including apples, durians, pears, bananas, pineapples, and strawberries. Esters are more polar than ethers but less polar than alcohols. They participate in hydrogen bonds as hydrogen-bond acceptors, but cannot act as hydrogen-bond donors, unlike their parent alcohols. This ability to participate in hydrogen bonding confers some water-solubility.Formula: C3H9NO

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Determination of the surface thermodynamic characteristics and the structural isomer separation ability of new synthesized phenylbenzoate-based three-ring calamitic liquid crystals by inverse gas chromatography was written by Cakar, Ayse Erdogan;Cakar, Fatih;Ocak, Hale;Karavelioglu, Selvi;Eran, Belkiz Bilgin;Cankurtaran, Ozlem. And the article was included in Journal of Molecular Structure in 2022.Synthetic Route of C13H12O2 The following contents are mentioned in the article:

Two different new calamitic liquid crystals (LCs), 4-[4-(((S)-3,7-dimethyloctyloxy)phenoxy)carbonyl]phenyl 4-(n-decyloxy)benzoate (DPDEB) and 4-[4-(((S)-3,7-dimethyloctyloxy)phenoxy)carbonyl]phenyl 4-(n-dodecyloxy)benzoate (DPDOB) were synthesized and characterized using ¹H-NMR, and ¹³C-NMR. The LC behavior of the target compounds was investigated by optical polarization microscopy (PM) and differential scanning calorimetry (DSC). The selectivity coefficients, a, of the structural isomers at infinite dilution for the DPDEB and DPDOB LCs were determined for Bu acetate, Bu alc. and amyl alc. isomers. Surface energy anal. has been performed using inverse gas chromatog. (IGC). By using suitable solvents, the surface properties and separation power of isomers of DPDEB and DPDOB LCs were determined between 303.2 and 323.2 K. Experiments with LC’s have been conducted at infinite dilution to the specific adsorption enthalpy and the specific adsorption free energy. IGC measurements exhibited values of acidity constants (K_A) of 0.033 and 0.057 and basic constants (K_D) of 0.176 and 0.242 for DPDEB and DPDOB, resp. It has been found that all LCs show basic character. This study involved multiple reactions and reactants, such as 4-Benzyloxyphenol (cas: 103-16-2Synthetic Route of C13H12O2).

4-Benzyloxyphenol (cas: 103-16-2) belongs to ethers. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Polyesters are important plastics, with monomers linked by ester moieties. Many esters have the potential for conformational isomerism, but they tend to adopt an s-cis (or Z) conformation rather than the s-trans (or E) alternative, due to a combination of hyperconjugation and dipole minimization effects. The preference for the Z conformation is influenced by the nature of the substituents and solvent, if present. Lactones with small rings are restricted to the s-trans (i.e. E) conformation due to their cyclic structure.Synthetic Route of C13H12O2

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Determination of the surface thermodynamic characteristics and the structural isomer separation ability of new synthesized phenylbenzoate-based three-ring calamitic liquid crystals by inverse gas chromatography was written by Cakar, Ayse Erdogan;Cakar, Fatih;Ocak, Hale;Karavelioglu, Selvi;Eran, Belkiz Bilgin;Cankurtaran, Ozlem. And the article was included in Journal of Molecular Structure in 2022.Quality Control of 4-Benzyloxyphenol The following contents are mentioned in the article:

Two different new calamitic liquid crystals (LCs), 4-[4-(((S)-3,7-dimethyloctyloxy)phenoxy)carbonyl]phenyl 4-(n-decyloxy)benzoate (DPDEB) and 4-[4-(((S)-3,7-dimethyloctyloxy)phenoxy)carbonyl]phenyl 4-(n-dodecyloxy)benzoate (DPDOB) were synthesized and characterized using ¹H-NMR, and ¹³C-NMR. The LC behavior of the target compounds was investigated by optical polarization microscopy (PM) and differential scanning calorimetry (DSC). The selectivity coefficients, a, of the structural isomers at infinite dilution for the DPDEB and DPDOB LCs were determined for Bu acetate, Bu alc. and amyl alc. isomers. Surface energy anal. has been performed using inverse gas chromatog. (IGC). By using suitable solvents, the surface properties and separation power of isomers of DPDEB and DPDOB LCs were determined between 303.2 and 323.2 K. Experiments with LC’s have been conducted at infinite dilution to the specific adsorption enthalpy and the specific adsorption free energy. IGC measurements exhibited values of acidity constants (K_A) of 0.033 and 0.057 and basic constants (K_D) of 0.176 and 0.242 for DPDEB and DPDOB, resp. It has been found that all LCs show basic character. This study involved multiple reactions and reactants, such as 4-Benzyloxyphenol (cas: 103-16-2Quality Control of 4-Benzyloxyphenol).

4-Benzyloxyphenol (cas: 103-16-2) belongs to ethers. Esters are widespread in nature and are widely used in industry. In nature, fats are in general triesters derived from glycerol and fatty acids. Esters are responsible for the aroma of many fruits, including apples, durians, pears, bananas, pineapples, and strawberries. Liquid esters of low volatility serve as softening agents for resins and plastics. Esters also include many industrially important polymers. Polymethyl methacrylate is a glass substitute sold under the names Lucite and Plexiglas; polyethylene terephthalate is used as a film (Mylar) and as textile fibres sold as Terylene, Fortrel, and Dacron.Quality Control of 4-Benzyloxyphenol

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Study on the synthesis of methylated reference and their application in the quantity of curcuminoids using single reference liquid chromatography based on relative molar sensitivity was written by Takahashi, Miki;Morimoto, Koji;Nishizaki, Yuzo;Masumoto, Naoko;Sugimoto, Naoki;Sato, Kyoko;Inoue, Koichi. And the article was included in Chemical & Pharmaceutical Bulletin in 2022.Recommanded Product: Bisdemethoxycurcumin The following contents are mentioned in the article:

We report on the recommendation of the simple and versatility of methylated reference (MR) to improve applications in the single reference (SR)-LC based on relative molar sensitivity (RMS). Three curcuminoids (Curs) such as curcumin, demethoxycurcumin and bisdemethoxycurcumin in turmeric products were determined using authentic standards and methylated curcumin. In addition, high-speed countercurrent chromatog. (HSCCC) purification is necessary to sep. Curs for indicating the RMS. For HSCCC separation, a biphasic solvent system was used to obtain these fractions, which were then subjected to 1H quant. NMR to determine their contents in each test solution Using these solutions, the RMS of Curs are calculated from slopes ratios of calibration curves (three ranges from 0-100μmol/L, r2 > 0.998). The averaged RMS of Curs were 8.92 (relative standard deviation (RSD), 1.17%), 8.97 (2.18%), and 9.61 (0.77%), resp. Cur concentrations in turmeric products can be determined using RMS, peak area, and MR content added in these samples. This proposed method, which is based on chem. methylation and the SR-LC assay has been successfully applied for the simple and reliable estimation of Curs in turmeric products. This study involved multiple reactions and reactants, such as Bisdemethoxycurcumin (cas: 33171-05-0Recommanded Product: Bisdemethoxycurcumin).

Bisdemethoxycurcumin (cas: 33171-05-0) belongs to ethers. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Polyesters are important plastics, with monomers linked by ester moieties. Cyclic esters are called lactones, regardless of whether they are derived from an organic or inorganic acid. One example of an organic lactone is γ-valerolactone.Recommanded Product: Bisdemethoxycurcumin

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

‘Lignin and extractives first’ conversion of lignocellulosic residual streams using UV light from LEDs was written by Hynynen, Jonna;Riddell, Alexander;Achour, Abdenour;Takacs, Zoltan;Wallin, Mats;Parkaas, Jim;Bernin, Diana. And the article was included in Green Chemistry in 2021.SDS of cas: 103-16-2 The following contents are mentioned in the article:

Lignocellulosic biomass, especially lignin and extractives, has the potential to substitute fossil precursors in the chem. industry. The conversion of lignin has been intensively researched, but challenges remain as high temperatures and increased pressure are commonly used, which is not energy efficient. Lignin and wood extractives bear chromophoric groups that can absorb light in the UV region, which enables photochem. reactions. UV light emitting diodes (UV-LEDs) are an emerging technol.; they are cheap, versatile, and energy-efficient compared to existing mercury lamps. UV-LEDs were used in this study as a proof of concept for the valorization of a lignocellulosic residual stream from the pulp and paper industry, sawdust. In a process at ambient temperature and pressure and without the use of a catalyst, we have shown that lignin and extractives can be valorised using light from UV-LEDs. Simplified lignin model compounds were used to pinpoint chem. reactions during irradiation, and to ease the anal. of the sawdust samples. The rate of conversion upon irradiation of the model compounds was found to be 0.7-2.3 g L^-1 h^-1, depending on the concentration of the starting compounds This study involved multiple reactions and reactants, such as 4-Benzyloxyphenol (cas: 103-16-2SDS of cas: 103-16-2).

4-Benzyloxyphenol (cas: 103-16-2) belongs to ethers. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Acyl chlorides and acid anhydrides alcoholysis is another way to produce esters. Acyl chlorides and acid anhydrides react with alcohols to produce esters. Anydrous conditions are recommended since both acyl chlorides and acid anhydrides react with water.SDS of cas: 103-16-2

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

‘Lignin and extractives first’ conversion of lignocellulosic residual streams using UV light from LEDs was written by Hynynen, Jonna;Riddell, Alexander;Achour, Abdenour;Takacs, Zoltan;Wallin, Mats;Parkaas, Jim;Bernin, Diana. And the article was included in Green Chemistry in 2021.Application In Synthesis of 4-Benzyloxyphenol The following contents are mentioned in the article:

Lignocellulosic biomass, especially lignin and extractives, has the potential to substitute fossil precursors in the chem. industry. The conversion of lignin has been intensively researched, but challenges remain as high temperatures and increased pressure are commonly used, which is not energy efficient. Lignin and wood extractives bear chromophoric groups that can absorb light in the UV region, which enables photochem. reactions. UV light emitting diodes (UV-LEDs) are an emerging technol.; they are cheap, versatile, and energy-efficient compared to existing mercury lamps. UV-LEDs were used in this study as a proof of concept for the valorization of a lignocellulosic residual stream from the pulp and paper industry, sawdust. In a process at ambient temperature and pressure and without the use of a catalyst, we have shown that lignin and extractives can be valorised using light from UV-LEDs. Simplified lignin model compounds were used to pinpoint chem. reactions during irradiation, and to ease the anal. of the sawdust samples. The rate of conversion upon irradiation of the model compounds was found to be 0.7-2.3 g L^-1 h^-1, depending on the concentration of the starting compounds This study involved multiple reactions and reactants, such as 4-Benzyloxyphenol (cas: 103-16-2Application In Synthesis of 4-Benzyloxyphenol).

4-Benzyloxyphenol (cas: 103-16-2) belongs to ethers. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Polyesters are important plastics, with monomers linked by ester moieties. Because of their lack of hydrogen-bond-donating ability, esters do not self-associate. Consequently, esters are more volatile than carboxylic acids of similar molecular weight.Application In Synthesis of 4-Benzyloxyphenol

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Activities of quinoxaline, nitroquinoxaline, and [1,2,4]triazolo[4,3-a]quinoxaline analogs of MMV007204 against Schistosoma mansoni was written by Debbert, Stefan L.;Hintz, Mikaela J.;Bell, Christian J.;Earl, Kenya R.;Forsythe, Grant E.;Haberli, Cecile;Keiser, Jennifer. And the article was included in Antimicrobial Agents and Chemotherapy in 2021.Quality Control of 2-Methoxyethylamine The following contents are mentioned in the article:

The reliance on one drug, praziquantel, to treat the parasitic disease schistosomiasis in millions of people a year shows the need to further develop a pipeline of new drugs to treat this disease. Recently, an antimalarial quinoxaline derivative (MMV007204) from the Medicines for Malaria Venture (MMV) Malaria Box demonstrated promise against Schistosoma mansoni. In this study, 47 synthesized compounds containing quinoxaline moieties were first assayed against the larval stage of this parasite, newly transformed schistosomula (NTS); of these, 16 killed over 70% NTS at 10 μM. Further testing against NTS and adult S. mansoni yielded three compounds with 50% inhibitory concentrations (IC₅₀s) of ≤0.31 μM against adult S. mansoni and selectivity indexes of ≥8.9. Administration of these compounds as a single oral dose of 400 mg/kg of body weight to S. mansoni-infected mice yielded only moderate worm burden reduction (WBR) (9.3% to 46.3%). The discrepancy between these compounds′ good in vitro activities and their poor in vivo activities indicates that optimization of their pharmacokinetic properties may yield compounds with greater bioavailabilities and better antischistosomiasis activities in vivo. This study involved multiple reactions and reactants, such as 2-Methoxyethylamine (cas: 109-85-3Quality Control of 2-Methoxyethylamine).

2-Methoxyethylamine (cas: 109-85-3) belongs to ethers. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Polyesters are important plastics, with monomers linked by ester moieties. Because of their lack of hydrogen-bond-donating ability, esters do not self-associate. Consequently, esters are more volatile than carboxylic acids of similar molecular weight.Quality Control of 2-Methoxyethylamine

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Comprehensive two-dimensional liquid chromatography-based quali-quantitative screening of aqueous phases from pyrolysis bio-oils was written by Lazzari, Eliane;Arena, Katia;Caramao, Elina B.;Dugo, Paola;Mondello, Luigi;Herrero, Miguel. And the article was included in Electrophoresis in 2021.Formula: C9H12O3 The following contents are mentioned in the article:

Pyrolysis processes are an alternative to minimize the environmental problem associated to agrifood industrial wastes. The main product resulting from these processes is a high-value liquid product, called bio-oil. Recently, the use of comprehensive two-dimensional liquid chromatog. (LC × LC) has been demonstrated as a useful tool to improve the characterization of the water-soluble phases of bio-oils, considering their complexity and high water content. However, the precise composition of bio-oils from different agrifood byproducts is still unknown. The qual. and quant. screening of eight aqueous phases from different biomasses, not yet reported in the literature, using LC × LC is presented. The two-dimensional approach was based on the use of two reverse phase separations An amide column in the first dimension together with a C18 column in the second dimension were employed. Thanks to the use of diode array and mass spectrometry detection, 28 compounds were identified and quantified in the aqueous phase samples with good figures of merit. Samples showed a distinct quali-quant. composition and a great predominance of compounds belonging to aldehydes, ketones and phenols, most of them with high polarity. This study involved multiple reactions and reactants, such as 4-Hydroxy-3-methoxyphenethanol (cas: 2380-78-1Formula: C9H12O3).

4-Hydroxy-3-methoxyphenethanol (cas: 2380-78-1) belongs to ethers. Esters are widespread in nature and are widely used in industry. In nature, fats are in general triesters derived from glycerol and fatty acids. Esters are responsible for the aroma of many fruits. Many esters have the potential for conformational isomerism, but they tend to adopt an s-cis (or Z) conformation rather than the s-trans (or E) alternative, due to a combination of hyperconjugation and dipole minimization effects. The preference for the Z conformation is influenced by the nature of the substituents and solvent, if present. Lactones with small rings are restricted to the s-trans (i.e. E) conformation due to their cyclic structure.Formula: C9H12O3

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Extraction of Natural Products by Direct Formation of Eutectic Systems was written by Liu, Min;Cao, Dan;Bi, Wentao;Chen, David Da Yong. And the article was included in ACS Sustainable Chemistry & Engineering in 2021.Related Products of 33171-05-0 The following contents are mentioned in the article:

A eutectic system forms when two or more substances reorganize into a superlattice that has a lower m.p. than each of the individual components. Deep eutectic solvents (DESs) are environmentally friendly solvents often used for the dissolution, extraction, and separation of chem. compounds Instead of using DESs for extraction, hydrogen bond acceptors (HBAs) or hydrogen bond donors (HBDs) can be used to form a deep eutectic system (DESys) directly with the target compound for one-step dissolution and extraction The feasibility of direct formation of a DESys for high efficiency extraction was demonstrated with turmeric as the extraction target. The data showed that the target compounds indeed directly interacted with HBAs (and for other compounds, HBDs), which increases process efficiency and reduces the time required for target compounds to compete with another HBD (or HBA) to form hydrogen bonds. In addition, the results showed that the target compounds have different physicochem. properties in DESys and DES, which resulted in different anal. behaviors of the targets. This research may lead to changes in how eutectic systems are used and the development of new applications based on the formation of DESys. This study involved multiple reactions and reactants, such as Bisdemethoxycurcumin (cas: 33171-05-0Related Products of 33171-05-0).

Bisdemethoxycurcumin (cas: 33171-05-0) belongs to ethers. Volatile esters with characteristic odours are used in synthetic flavours, perfumes, and cosmetics. Certain volatile esters are used as solvents for lacquers, paints, and varnishes. Cyclic esters are called lactones, regardless of whether they are derived from an organic or inorganic acid. One example of an organic lactone is γ-valerolactone.Related Products of 33171-05-0

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem