Category: 321-28-8

Application of 321-28-8, These common heterocyclic compound, 321-28-8, name is 1-Fluoro-2-methoxybenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1: 3-(3-fluoro-4-methoxybenzoyl)propionic acid Intermediate 351-Fluoro-2-methoxybenzene (7 mL, 0.062 mol) and succinic anhydride (6.93 g, 0.0692 mol) were dissolved in methylene chloride (100 mL). The resulting solution was cooled in an ice-water bath for 20 min. Aluminum trichloride (18.3 g, 0.137 mol) was then added in portions. Upon completion of addition, the mixture was heated at 65 C. in an oil bath for 2 h and then cooled to room temperature and allowed to stir overnight. The reaction mixture was poured onto ice and 200 mL 1N HCl was added. A white precipitate formed which was isolated by suction filtration. The filter cake was dried under suction and then further dried under vacuum to provide the title compound as a white solid (12.703 g, 90%). LC-MS: (FA) ES- 225; NMR (400 MHz, CD3OD) delta ppm 7.86 (ddd, J=8.6, 2.1, 1.14 Hz, 1H), 7.72 (dd, J=12.1, 2.1 Hz, 1H), 7.20 (dd, J=8.5, 8.5 Hz, 1H), 3.95 (s, 3H), 3.28-3.23 (m, 2H), 2.71-2.66 (m, 2H).

The synthetic route of 321-28-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Millennium Pharmaceuticals, Inc.; US2012/15942; (2012); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 321-28-8, These common heterocyclic compound, 321-28-8, name is 1-Fluoro-2-methoxybenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[PENTAMETHYLENEDIETHYLENETETRAMINE] (31. [2ML)] was added to a solution of 2-fluoroanisole [(15.] 0g) in THF [(450ML).] The reaction mixture was cooled [TO-78C] and n-butyllithium (59. [6ML,] 2. 5M solution in hexanes) was added dropwise. Stirring was maintained for 2h before the solution was added in a dropwise fashion to a flask containing solid carbon dioxide pellets. Upon complete addition (30min) the mixture was allowed to warm to room temperature before removal of the volatiles in vacuo. The residue was dissolved in 10% sodium hydroxide solution [(300ML)] and extracted with Et20 (3x). The aqueous was acidified to pH 1 with concentrated hydrochloric acid before extracting with DCM. The organics were washed with [H20,] dried (MgS04) and concentrated in vacuo to afford the subtitle compound as a yellow solid. Yield: 7. [1G.] [LH NMR 6 (CDC13)] 7.50 [(1H,] [M),] 7.12 (2H, [M),] 3.91 (3H, s).

The synthetic route of 321-28-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2004/11443; (2004); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 321-28-8, name is 1-Fluoro-2-methoxybenzene, A new synthetic method of this compound is introduced below., Quality Control of 1-Fluoro-2-methoxybenzene

Initially, 2-fluoroanisole (II) was used to synthesize 3-fluoro-4-methoxyacetophenone (III). AlCl3 (0.6 mol) and acetic anhydride (0.4 mol) were placed in 250 ml of dry dicloromethane. The 2-fluoroanisol (0.2 mol) was added dropwise over a period of 30 minutes to the reaction mixture which was then stirred with a magnetic stir bar for two hours. The reaction was judged complete by TLC. The reaction mixture was then poured in ice and stirred for one hour. The CH2 Cl2 layer was separated and the water layer was extracted twice with CH2 Cl2. Organic layers were combined and washed with 3N HCl and water, dried with MgSO4 and passed through a thick pad of silica. The solvent was rotary evaporated to obtain the crude product, which was crystallized from 7% (v/v) ethyl acetate in hexanes to obtain 70% yield of the crystallized product, 3-fluoro-4-methoxyacetophenone (III).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Displaytech, Inc.; US5422037; (1995); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 321-28-8, name is 1-Fluoro-2-methoxybenzene, This compound has unique chemical properties. The synthetic route is as follows., Formula: C7H7FO

Step 1: Preparation of 1-(3-fluoro-4-methoxyphenyl)-2-phenyl-ethan-1-one. A suspension of aluminum chloride (9.4 g, 70.5 mmol) in a solution of 2-fluoroanisole (6.6 mL, 58.8 mmol) and anhydrous chloroform (200 mL) was cooled to 0 C. under a blanket of dry nitrogen. A solution of phenylacetyl chloride (8.6 mL, 64.7 mmol) in anhydrous chloroform (50 mL) was added to the vigorously stirred suspension over 20 minutes keeping the reaction temperature <5 C. The yellowish solution was stirred at 0 C. for 1 hour, poured into ice (200 mL) and stirred without temperature control for 16 hours. The layers were separated, and the aqueous layer was extracted with dichloromethane (2*100 mL). The combined organic solution was dried over magnesium sulfate, filtered, and the solvent was evaporated under reduced pressure. The resulting solid was recrystallized from boiling hexane to yield, upon filtration and drying, 1-(3-fluoro-4 methoxyphenyl)-2-phenyl-ethan-1-one (12.9 g, 90%) as white crystals: 1 H NMR (CDCl3 /300 MHz) delta 7.82-7.72 (m, 2H), 7.35-7.24 (m, 5H), 6.98 (dd, J=8.46, 8.26 Hz, 1H), 4.22 (s, 2H), 3.94 (s, 3H). 19 F NMR (CDCl3 /282.2 MHz) -134.875 (m). According to the analysis of related databases, 321-28-8, the application of this compound in the production field has become more and more popular. Reference:
Patent; G. D. Searle & Co.; US5859257; (1999); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

321-28-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 321-28-8, name is 1-Fluoro-2-methoxybenzene belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Synthesis of 3-fluoro-4-methoxybromobenzene Into a flask of 5 l were charged 384 g (3.04 mol) of 2-fluoroanisole and 2.5 l of chloroform, to which was added dropwise 504 g (3.16 mol) of bromine over about 3 hours while cooling on an ice water bath at 10 C. The resulting mixture was stirred at room temperature over a night and heated under reflux for 8 hours. After the air cooling, the product was added with 1 l of water and 50 g of sodium bisulfite and sufficiently shaken to separate into two layers. The resulting organic layer was washed with an aqueous solution of 5% sodium hydrogen carbonate and further with 1 l of water and dried on magnesium sulfate. After magnesium sulfate was filtered off, the filtrate was concentrated and distilled under a reduced pressure (4 mmHg, bp: 93-96 C.) to obtain 585 g (yield: 94%) of 3-fluoro-4-methoxybromobenzene.

The synthetic route of 1-Fluoro-2-methoxybenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Nippon Mining Co., Ltd.; US5098602; (1992); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

321-28-8, A common heterocyclic compound, 321-28-8, name is 1-Fluoro-2-methoxybenzene, molecular formula is C7H7FO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solution of the selected anisole or biphenyl (13.0mmol) in 30mL of dry CH2Cl2 at 0 C, p-toluoylchloride (2g, 13.0mmol), and AlCl3 (3g, 22.05mmol) were added and the mixture was stirred at rt overnight. After addition of ice, the mixture was diluted with CH2Cl2, washed with NaHCO3 saturated solution, dried and evaporated to dryness.

The synthetic route of 321-28-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Gobbi, Silvia; Hu, Qingzhong; Foschi, Giacomo; Catanzaro, Elena; Belluti, Federica; Rampa, Angela; Fimognari, Carmela; Hartmann, Rolf W.; Bisi, Alessandra; Bioorganic Chemistry; vol. 86; (2019); p. 401 – 409;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding some certain compound to certain chemical reactions, such as: 321-28-8, name is 1-Fluoro-2-methoxybenzene, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 321-28-8. 321-28-8

Step 1. Preparation of 3′-fluoro-4′-methoxyacetophenone Aluminum chloride (80.0 g, 0.6 mol) and chloroform (750 mL) were placed in a 2 L three-necked round bottom flask fitted with a mechanical stirrer and cooled by means of an ice bath. To the stirred solution was added acetyl chloride (51.0 g, 0.65 mol) dropwise, maintaining the temperature between 5-10 C. The mixture was allowed to stir for 10 minutes. at 5 C. before the dropwise addition at 5-10 C. of 2-fluoroanisole (63.06 g, 0.5 mol). The mixture was stirred at 0-10 C. for 1 hour and poured into ice (1 L). The resultant layers were separated and the aqueous layer was extracted with methylene chloride (2*250 mL). The combined organic layers were washed with water (2*150 mL), dried over magnesium sulfate, and concentrated to 300 mL. Hexanes were added and a white solid (77.2 g, 92%) was crystallized from the mixture: mp 92-94 C.; 1 H NMR (d6 -DMSO) 7.8 (m, 2H), 7.3 (t, J=8.7 Hz, 1H), 3.9 (s, 3H), 2.5 (s, 3H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1-Fluoro-2-methoxybenzene.

Reference:
Patent; G.D. Searle & Co.; US5756529; (1998); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

321-28-8, Adding some certain compound to certain chemical reactions, such as: 321-28-8, name is 1-Fluoro-2-methoxybenzene, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 321-28-8.

Step 1: Preparation of 3′-fluoro-4′-methoxy-acetophenone. acetyl chloride (51.0 g, 0.65 mol) was added dropwise to a stirred solution of aluminum chloride (80.0 g, 0.6 mol) and chloroform (750 ML), maintaining the temperature between 5-10 C. The mixture was stirred for 10 minutes at 5 C. before the dropwise addition of 2-fluoroanisole (62.6 g, 0.5 mol).. The mixture was stirred at 0-10 C. for 1 hour and poured into ice (1 L).. The resultant layers were separated and the aqueous layer was extracted with dichloromethane (2*250 ML).. The combined organic layers were washed with water (2*150 ML), dried over anhydrous MgSO4, filtered and concentrated in vacuo to a volume of 300 ML. Hexanes were added and a white solid formed which was isolated by filtration and air dried.. This material was recrystallized from a mixture of dichloromethane and hexanes to afford (77.2 g, 92%) of material suitable for use in the next step: mp 92-94 C.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 321-28-8.

Reference:
Patent; G. D. Searle & Co.; US6342510; (2002); B1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 321-28-8, name is 1-Fluoro-2-methoxybenzene belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. 321-28-8

Step 1: Preparation of 3′-fluoro-4′-methoxy-acetophenone. Acetyl chloride (51.0 g, 0.65 mol) was added dropwise to a stirred solution of aluminum chloride (80.0 g, 0.6 mol) and chloroform (750 mL), maintaining the temperature between 5-10 C. The mixture was stirred for 10 minutes at 5 C. before the dropwise addition of 2-fluoroanisole (62.6 g, 0.5 mol). The mixture was stirred at 0-10 C. for 1 hour and poured into ice (1 L). The resultant layers were separated and the aqueous layer was extracted with dichloromethane (2*250 mL). The combined organic layers were washed with water (2*150 mL), dried over anhydrous MgSO4, filtered and concentrated in vacuo to a volume of 300 mL. Hexanes were added and a white solid formed which was isolated by filtration and air dried. This material was recrystallized from a mixture of dichloromethane and hexanes to afford (77.2 g, 92%) of material suitable for use in the next step: mp 92-94 C.

The synthetic route of 321-28-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; G.D. Searle & Co.; US5990148; (1999); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 321-28-8, name is 1-Fluoro-2-methoxybenzene, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 321-28-8, 321-28-8

General procedure: To a 5 mL screw-capped vial equipped with a 15¡Á10 mm spinvane triangular-shaped Teflon stirbar, simple arene 1(0.5 mmol), saccharin (1.0 mmol), Selectfluor (1.0 mmol), K2CO3 (1.0 mmol) and CuCl (0.1 mmol) were added in nitromethane (3.0 mL). The mixture was sealed with aTeflon-lined cap and stirred at 90 C for 6.0 h (monitoredby TLC), extracted with dichloromethane (5¡Á3 mL), and dried over anhydrous Na2SO4. The solvent was removed under reduced pressure, and the residue was purified by flash silica gel column chromatography to give aromatic amine 2. The characterizations of aromatic amines 2 and 4 were listed in the Supporting Information online.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Fluoro-2-methoxybenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Sun, Kai; Li, Yan; Zhang, Qian; Science China Chemistry; vol. 58; 8; (2015); p. 1354 – 1358;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem