Category: 710-18-9

710-18-9, name is 1-Methoxy-4-(trifluoromethoxy)benzene, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 1-Methoxy-4-(trifluoromethoxy)benzene

PREPARATION 18 Synthesis of 2-methoxy-5-trifluoromethoxybenzoyl chloride Combine 2-methoxy-5-trifluoromethoxybenzene (1.0 g, 5.2 mmol) and trifluoroacetic acid (200 mL). Add slowly portionwise hexamethylenetetraamine (26 g, 185.7 mmol). Heat at 60 C. After 24 hours, cool to ambient temperature and pour the reaction mixture into a 2 M aqueous solution of sulfuric acid (500 mL). Cool and extract ten times with diethyl ether. Dry the combined organic layers over Na2 SO4, filter, and evaporate in vacuo to give a residue. Chromatograph the residue on silica gel eluding with 1/4 ethyl acetate/hexane to give 2-methoxy-5-trifluoromethoxybenzaldehyde.

The synthetic route of 710-18-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Hoescht Marion Roussel, Inc.; US5998439; (1999); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 710-18-9, A common heterocyclic compound, 710-18-9, name is 1-Methoxy-4-(trifluoromethoxy)benzene, molecular formula is C8H7F3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Under N2 atmosphere, an oven-dried 4 mL vial was charged with l-methoxy-4- (trifluoromethoxy)benzene (57.6 mg, 45.5 mu, 0.300 mmol, 1.00 equiv), palladium complex 1 (11.4 mg, 15.0 muetaiotaomicron, 5.00 mol ), Ag(bipy)2C104 (16.0 mg, 30.0 muetaiotaomicron, 10.0 mol ), and NFBS (0.189 g, 0.600 mmol, 2.00 equiv). Acetonitrile (0.75 mL, c = 0.40 M) was added and the reaction mixture was stirred in a sealed vial at 23 C for 24 h. Subsequently, triethylamine (30.5 mg, 42.0 mu, 0.300 mmol, 1.00 equiv) was added and the reaction mixture was concentrated in vacuo. The residue was purified by chromatography on silica gel, eluting with hexanes/EtOAc (19: 1 to 4: 1 (v/v) with 1% triethylamine), to afford 89.2 mg of the title compound as a colorless solid (61 yield). [00215] Rf = 0.30 (hexanes/EtOAc 4: 1 (v/v)). NMR Spectroscopy: 1H NMR (600 MHz, CDC13, 23 C, delta): 7.97 (d, J = 7.6 Hz, 4H), .65-1.69 (m, 2H), 7.54 (t, J = 7.6 Hz, 4H), 7.29 (dd, J = 9.5, 2.9 Hz, 1H), 6.95 (d, J = 2.9 Hz, 1H), 6.85 (d, J = 8.6 Hz, 1H), 3.43 (s, 3H). 13C NMR (125 MHz, CDC13, 23 C, delta): 156.8, 141.8, 139.8, 134.0, 128.9, 128.9, 126.5, 125.1, 123.4, 120.6 (q, J = 255 Hz), 112.4, 55.8. 19F NMR (375 MHz, CDC13, 23 C, delta): -59.9. Mass Spectrometry: HRMS (ESI-TOF) (m/z): calcd for C20H2oF3N206S2 [M + NH4]+, 505.0709, found, 505.0721.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; PRESIDENT AND FELLOWS OF HARVARD COLLEGE; NGAI, Ming-Yu; BOURSALIAN, Gregory, Bagrad; MCNEILL, Eric, Andrew; RITTER, Tobias; WO2015/31725; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 710-18-9, name is 1-Methoxy-4-(trifluoromethoxy)benzene, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 710-18-9, Recommanded Product: 1-Methoxy-4-(trifluoromethoxy)benzene

Preparation 34 2-Methoxy-5-trifluoromethoxybenzoyl chloride Combine 2-methoxy-5-trifluoromethoxybenzene (1.0 g, 5.2 mmol) and trifluoroacetic acid (200 mL). Add slowly portionwise hexamethylenetetraamine (26 g, 185.7 mmol). Heat at 60 C. After 24 hours, cool to ambient temperature and pour the reaction mixture into a 2 M aqueous solution of sulfuric acid (500 mL). Cool and extract ten times with diethyl ether. Dry the combined organic layers over Na2SO4, filter, and evaporate in vacuo to give a residue. Chromatograph the residue on silica gel eluding with 1/4 ethyl acetate/hexane to give 2-methoxy-5-trifluoromethoxybenzaldehyde.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Aventis Pharmaceuticals Inc.; US6194406; (2001); B1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 710-18-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 710-18-9, name is 1-Methoxy-4-(trifluoromethoxy)benzene belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

PREPARATION 18 Synthesis of 2-methoxy-5-trifluoromethoxybenzoyl chloride Combine 2-methoxy-5-trifluoromethoxybenzene (1.0 g, 5.2 mmol) and trifluoroacetic acid (200 mL). Add slowly portionwise hexamethylenetetraamine (26 g, 185.7 mmol). Heat at 60 C. After 24 hours, cool to ambient temperature and pour the reaction mixture into a 2 M aqueous solution of sulfuric acid (500 mL). Cool and extract ten times with diethyl ether. Dry the combined organic layers over Na2 SO4, filter, and evaporate in vacuo to give a residue. Chromatograph the residue on silica gel eluding with 1/4 ethyl acetate/hexane to give 2-methoxy-5-trifluoromethoxybenzaldehyde.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Methoxy-4-(trifluoromethoxy)benzene, other downstream synthetic routes, hurry up and to see.

Reference of 710-18-9, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 710-18-9 as follows.

General procedure: Lewis acid (1.0-1.5eq) (powdered AlCl3, powdered FeCl3, 1 or 2 M solution of TiCl4 in CH2Cl2) was added portionwise to a stirred 1 M solution of the aromatic compound in dry CH2Cl2, and then 2a-f (1.2-1.5 eq) was added dropwise at 0C over a period of 2-10 min. The mixture was stirred for several hours at room temperature. Following complete conversion of starting material, as confirmed by GC analysis, the mixture was quenched with H2O and extracted with CH2Cl2 or EtOAc. The combined organic layers were successively washed with satd. aq. NaHCO3 and brine, dried over Na2SO4, and concentrated in vacuo. The residue was purified by distillation or column chromatography on silica-gel, if necessary.

According to the analysis of related databases, 710-18-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Warashina, Takuya; Matsuura, Daisuke; Kimura, Yoshikazu; Chemical and Pharmaceutical Bulletin; vol. 67; 6; (2019); p. 587 – 593;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 710-18-9, name is 1-Methoxy-4-(trifluoromethoxy)benzene, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 710-18-9, HPLC of Formula: C8H7F3O2

To 4-methoxy-trifluoromethoxybenzene (0.19 g, 0. [001] mol) in 5 mL acetonitrile was added nitronium tetrafluoroborate (0.146 g, 0.001 mol) at room temperature. After about 6 h, another 0.25 equivs of nitronium tetrafluoroborate was added and the reaction stirred overnight. The reaction was then concentrated in vacuo, and the residue was partitioned between ether and water. The aqueous phase was washed [TWICW] with ether, then the combined organic layers were washed with water, and dried over MgS04. The solvent was removed, resulting in a mobile oil. Kugelrohr distillation of the oil provided 0.2 g of the desired nitrated intermediate which was collected at [100-125 C.]

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Methoxy-4-(trifluoromethoxy)benzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BOEHRINGER INGELHEIM PHARMACEUTICALS, INC.; WO2004/14870; (2004); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 710-18-9, name is 1-Methoxy-4-(trifluoromethoxy)benzene belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Application In Synthesis of 1-Methoxy-4-(trifluoromethoxy)benzene

PREPARATION 34 2-Methoxy-5-trifluoromethoxybenzoyl chloride Combine 2-methoxy-5-trifluoromethoxybenzene (1.0 g, 5.2 mmol) and trifluoroacetic acid (200 mL). Add slowly portionwise hexamethylenetetraamine (26 g, 185.7 mmol). Heat at 60 C. After 24 hours, cool to ambient temperature and pour the reaction mixture into a 2 M aqueous solution of sulfuric acid (500 mL). Cool and extract ten times with diethyl ether. Dry the combined organic layers over Na2SO4, filter, and evaporate in vacuo to give a residue. Chromatograph the residue on silica gel eluding with 1/4 ethyl acetate/hexane to give 2-methoxy-5-trifluoromethoxybenzaldehyde.

The synthetic route of 710-18-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Aventis Pharmaceuticals Inc.; US6423704; (2002); B1;; ; Patent; Aventis Pharmaceuticals Inc.; US6211199; (2001); B1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

710-18-9, The chemical industry reduces the impact on the environment during synthesis 710-18-9, name is 1-Methoxy-4-(trifluoromethoxy)benzene, I believe this compound will play a more active role in future production and life.

PREPARATION 18 2-Methoxy-5-trifluoromethoxybenzoyl chloride Combine 2-methoxy-5-trifluoromethoxybenzene (1.0 g, 5.2 mmol) and trifluoroacetic acid (200 mL). Add slowly portionwise hexamethylenetetraamine (26 g, 185.7 mmol). Heat at 60 C. After 24 hours, cool to ambient temperature and pour the reaction mixture into a 2M aqueous solution of sulfuric acid (500mL). Cool and extract ten times with diethyl ether. Dry the combined organic layers over Na2 SO4, filter, and evaporate in vacuo to give a residue. Chromatograph the residue on silica gel eluding with 1/4 ethyl acetate/hexane to give 2-methoxy-5-trifluoromethoxybenzaldehyde.

The chemical industry reduces the impact on the environment during synthesis 1-Methoxy-4-(trifluoromethoxy)benzene. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Hoechst Marion Roussel, Inc.; US5922737; (1999); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem