Ethers-buliding-blocks

These common heterocyclic compound, 111-95-5, name is Bis(2-methoxyethyl)amine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 111-95-5

To the product from step 2 (1.00 g, 5.29 mmol) in ACN (20 mL) was added bis(2-methoxyethyl)amine (3.0 mL, 2.71 g, 20.3 mmol) and the reaction mixture was heated to 70 C. for 16 hours thereafter. The reaction was cooled and concentrated. The residue was partitioned with EtOAc and water. The organic layer was separated and the aqueous was extracted again with EtOAc. The combined organic extracts were washed with brine, dried (Na2SO4), filtered and concentrated. Purification by flash column chromatography (SiO2, 10/1 hexanes-EtOAc to 1/1) afforded 950 mg (63% yield) of the desired adduct as a yellow solid: 1NMR (300 MHz, CDCl3) delta 7.47 (bs, 2H), 3.77 (t, J=5.7 Hz, 4H), 3.52 (t, J=5.4 Hz, 4H), 3.25 (s, 6H). 13C NMR (75 MHz, CDCl3) delta 154.7 (s), 152.0 (s), 120.9 (s), 119.5 (s), 95.8 (s), 71.0 (t), 59.1 (q), 50.0 (t).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 111-95-5.

Reference:
Patent; MediBeacon Inc.; Rajagopalan, Raghavan; Dorshow, Richard B.; Neumann, William L.; Rogers, Thomas E.; (52 pag.)US2019/125902; (2019); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 41406-00-2, name is 3-Isopropoxyaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. 41406-00-2

EXAMPLE 178 4-(3-Isopropoxyanilino)-6-methyl-2-(2-pyridinyl)pyrimidine The title compound was prepared from 4-chloro-6-methyl-2-(2-pyridinyl)pyrimidine (82.3 mg, 0.4 mmol) and 3-isopropoxyaniline (60.4 mg, 0.4 mmol) similar to Example 173 and was isolated as a white solid (88 mg, 69%). 1H NMR (CDCl3): 8.64 (d, J=4.2 Hz, 1H), 8.35 (d, J=8.1 Hz, 1H), 7.7 (t, J=8.1 Hz, 1H), 7.24 (m, 1H), 7.15 (m, 1H), 6.96 (s, 1H), 6.76 (m, 2H), 6.60 (d, J=8.1 Hz, 1H), 6.18 (m, 1H), 4.45 (m, 1H), 2.37 (s, 3H), 1.25 (d, J=6.0 Hz, 6H).

The synthetic route of 41406-00-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Cytovia, Inc.; US2003/69239; (2003); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 22236-10-8, name is 4-(Difluoromethoxy)aniline, A new synthetic method of this compound is introduced below., 22236-10-8

Into a 250-mL round-bottom flask purged with and maintained under nitrogen was placed 4- (difluoromethoxy)benzenamine (10 g, 62.8 mmol), ACN (100 mL), and BS (5.59 g, 31.4 mmol). The resulting solution was stirred for 1 h RT and then was concentrated under vacuum. The residue was applied onto a silica gel column and eluted with a gradient of ethyl acetate/petroleum ether (1 :20 to 1 : 10). This resulted in 7.9 g (53%) of the title compound as red oil. MS-ESI: 238.0/240.0 (M+l).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; IFM TRE, INC.; GLICK, Gary; ROUSH, William R.; VENKATRAMAN, Shankar; SHEN, Dong-Ming; GHOSH, Shomir; KATZ, Jason; SEIDEL, Hans Martin; FRANCHI, Luigi; WINKLER, David Guenther; OPIPARI JR., Anthony William; (783 pag.)WO2019/23147; (2019); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 1535-73-5, name is 3-Trifluoromethoxyaniline, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 1535-73-5, 1535-73-5

Ethyl 6-((3-(trifluoromethoxy)phenyl)carbamoyl)nicotinate (5.5.2)To a stirring solution of 5-(ethoxycarbonyl)picolinic acid (0.50 g, 2.56 mmol) in DMF (10 ml) was added CDI (0.623 g, 3.84 mmol). The reaction was allowed to stir for 10 min and the 3-(trifluoromethoxy)aniline (0.41 ml, 3.07 mmol) was added. The solution was stirred overnight at room temperature. An LC-MS was obtained which indicated the presence of the product. Water was added to the reaction and the white precipitate was filtered. LC- MS of the solid confirmed the product as ethyl 6-((3- (trifluoromethoxy)phenyl)carbamoyl)nicotinate (0.45 g, 50 percent). 1 H NMR (400MHz CDCI3) deltaEta ppm 1 .36 (t, 3H), 4.39 (q, 2H), 7.13 (d, 1 H), 7.50 (t, 1 H), 7.94 (d, 1 H), 8.09 (s, 1 H), 8.29 (d, 1 H), 8.44 (d, 1 H), 9.19 (s, 1 H), 1 1 .1 1 (s, 1 H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Trifluoromethoxyaniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ITHEMBA PHARMACEUTICALS (PROPRIETARY) LIMITED; MUSONDA, Chitalu, Christopher; EDLIN, Christopher, David; BOYLE, Grant, Alexander; WO2013/72903; (2013); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 60792-79-2 as follows. 60792-79-2

Example 3 Preparation of 2-hydroxy-N-(2-(2-(2-((2Z,5Z,8Z,11Z,14Z,17Z)-eicosa-2,5,8,11,14,17-hexaenylthio)acetamido)ethoxy)ethyl)benzamide (1-1) In a typical run, sodium hydroxide (400 mg, 10 mmol) is dissolved in MeOH (70 mL) and 2-(2-aminoethoxy)ethanamine dihydrochloride (1.0 g, 5.65 mmol) is added. The resulting reaction mixture is stirred at room temperature for 30 min. A solution containing Boc2O (740 mg, 3.40 mmol) in THF (15 mL) is then added dropwise, at room temperature, over a period of 15 min. The resulting reaction mixture is stirred at room temperature for 18 h and then concentrated under reduced pressure. The resulting residue is taken up in CH2Cl2 (200 mL) and stirred vigorously at room temperature for 4 h. The mixture is filtered and the filtrate is concentrated under reduced pressure to afford tert-butyl 2-(2-aminoethoxy)ethylcarbamate (850 mg, 74%).

According to the analysis of related databases, 60792-79-2, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Milne, Jill C.; Jirousek, Michael R.; Bemis, Jean E.; Vu, Chi B.; US2011/82120; (2011); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 51388-20-6, name is 4-(Benzyloxy)aniline hydrochloride belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. 51388-20-6

Preparation XXVIII Methyl 2-methyl-2-[[4-(phenylmethoxy)phenyl]amino]propionate 3 g (15 mmol) of 4-(phenylmethoxy)aniline and 5.5 g (30 mmol) of methyl 2-bromo-2-methylpropionate are mixed and 1.95 g of sodium bicarbonate are added. The reaction medium is stirred for 5 h at 140 C. and then cooled and taken up with 50 ml of water and 100 ml of ethyl ether. The aqueous phase is separated off and re-extracted with 50 ml of ethyl ether and the combined organic phases are washed with water and then dried over sodium sulfate and concentrated under reduced pressure. The residue is purified by chromatography on silica gel using a cyclohexane/ethyl acetate mixture (8/2; v/v) as the eluent to give the expected product in the form of a beige crystalline solid (yield=75%). M.p.<50 C. The synthetic route of 51388-20-6 has been constantly updated, and we look forward to future research findings. Reference:
Patent; Binet, Jean; Boubia, Benaissa; Chaput, Evelyne; Edgar, Alan; Ou, Khan; Ratel, Philippe; Samreth, Soth; Thomas, Didier; US2006/25589; (2006); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

366-99-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 366-99-4, name is 3-Fluoro-4-methoxyaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Preparation 66A: 4-Bromo-3-fluoro-N-(3-fluoro-4- methoxyphenyl)benzenecarboximidamide To a solution of EtMgBr (48 mL, 42.55 mmol, 0.9 M) in THF (24 mL) was added a solution of 3-fluoro-4-methoxyaniline (3 g, 21.28 mmol) in THF (30 mL) at r.t. The mixture was stirred for 30 min at r.t. A solution of 4-bromo-3-fluorobenzonitrile (4.657 g, 23.40 mmol) in THF (20 mL) was added dropwise at r.t. and stirred overnight at r.t. LC/MS showed the reaction was completed, H20 was added and extracted with EA, dried, concentrated and purified by flash chromatography on silica gel (PE/EA=3/1 to EA) to afford 4-bromo-3-fluoro-N-(3-fluoro-4-methoxyphenyl)benzenecarboximidamide (4.68 g, 65percent). [M+H] Calc’d for Ci4HnBrF2N20, 341; Found, 341.

The synthetic route of 3-Fluoro-4-methoxyaniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; QUANTICEL PHARMACEUTICALS, INC.; CHEN, Young, K.; KANOUNI, Toufike; NIE, Zhe; STAFFORD, Jeffrey, Alan; VEAL, James, Marvin; (166 pag.)WO2016/4105; (2016); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

929-75-9, name is 1,11-Diamino-3,6,9-trioxaundecane, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. 929-75-9

Example 174 (3S)-3-(2-benzyl-3-chloro-7-oxo-2,4,5,7-tetrahydro-6H-pyrazolo[3,4-c]pyridin-6-yl)-N-(13-((3S)-3-(2-benzyl-3-chloro-7-oxo-2,4,5,7-tetrahydro-6H-pyrazolo[3,4-c]pyridin-6-yl)-5-methyl-4-oxo-2,3,4,5-tetrahydro-1,5-benzoxazepin-8-yl)-13-oxo-3,6,9-trioxa-12-azatridec-1-yl)-5-methyl-4-oxo-2,3,4,5-tetrahydro-1,5-benzoxazepine-8-carboxamide To a mixture of (S)-2,4,6-trichlorophenyl 3-(2-benzyl-3-chloro-7-oxo-4,5-dihydro-2H-pyrazolo[3,4-c]pyridin-6(7H)-yl)-5-methyl-4-oxo-2,3,4,5-tetrahydrobenzo[b][1,4]oxazepine-8-carboxylate (50 mg) and tetrahydrofuran (2 mL) were added 2,2′-((oxybis(ethane-2,1-diyl))bis(oxy))diethanamine (7.28 mg), triethylamine (7.66 mg) and 4-dimethylaminopyridine (0.46 mg) at room temperature, and the mixture was stirred at 50C for 2 hr. The reaction mixture was diluted with ethyl acetate, washed with 0.1 M hydrochloric acid, saturated aqueous sodium hydrogencarbonate solution and saturated brine, and dried over anhydrous sodium sulfate, and the solvent was evaporated under reduced pressure. The residue was purified by silica gel column chromatography (ethyl acetate/methanol) to give the title compound (27.1 mg). 1H NMR (300 MHz, CDCl3) delta2.66 (2H, dt, J = 15.9, 4.7 Hz), 3.03 (2H, ddd, J = 15.5, 10.4, 5.1 Hz), 3.29-3.39 (5H, m), 3.45-3.81 (17H, m), 4.15-4.27 (2H, m), 4.29-4.43 (2H, m), 4.52-4.71 (2H, m), 5.38 (4H, s), 5.85 (2H, dd, J = 11.5, 8.1 Hz), 7.11 (2H, brs), 7.18-7.35 (10H, m), 7.62-7.76 (4H, m).

Statistics shows that 929-75-9 is playing an increasingly important role. we look forward to future research findings about 1,11-Diamino-3,6,9-trioxaundecane.

Reference:
Patent; Takeda Pharmaceutical Company Limited; YOGO, Takatoshi; YOSHIKAWA, Masato; SAITOH, Morihisa; KATOH, Taisuke; SEKI, Tomohiro; NAKADA, Yoshihisa; (148 pag.)EP3366684; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 22236-10-8, name is 4-(Difluoromethoxy)aniline, This compound has unique chemical properties. The synthetic route is as follows., 22236-10-8

D. 7-(3-Chloropyridin-2-yl)-N-(4-(difluoromethoxy)phenyl)-5,6,7,8-tetrahydropyrido[3,4-d]pyrimidin-4-amine A mixture of 4-chloro-7-(3-chloropyridin-2-yl)-5,6,7,8-tetrahydropyrido[3,4-d]pyrimidine (0.103 g, 0.000366 mol) and 4-(difluoromethoxy)aniline (0.091 mL, 0.00073 mol) in acetonitrile (3 mL, 0.06 mol) was heated via microwave in a sealed tube at 160 C. for 10 minutes. After cooling to room temperature, the mixture was added to saturated sodium bicarbonate and extracted with ethyl acetate. The organic layer was washed with brine and dried over sodium sulfate. Concentrated to leave an oil. The residue was purified by flash chromatography over silica gel (ethyl acetate/hexane gradient 0 to 100%) to give 0.113 g of a light yellow solid. MS: M+H=404 1H NMR (DMSO-d6): delta 2.80 (t, J=5.6 Hz, 2H); 3.68 (t, J=5.6 Hz, 2H); 4.35 (s, 2H); 7.04 (dd, J=7.6 Hz, 4,7 Hz, 1H); 7.15 (d, J=9.0 Hz, 2H); 7.17 (t, J=75.0 Hz, 1H); 7.69-7.74 (m, 2H); 7.86 (dd, J=7.9 Hz, 1.6 Hz, 1H); 8.24 (dd, J=4.7 Hz, 1.6 Hz, 1H); 8.40 (s, 1H); 8.57 (s, 1H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Kelly, Michael G.; Janagani, Satyanarayana; Wu, Guoxian; Kincaid, John; Lonergan, David; Fang, YunFeng; Wei, Zhi-Liang; US2005/277643; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

22236-10-8, The chemical industry reduces the impact on the environment during synthesis 22236-10-8, name is 4-(Difluoromethoxy)aniline, I believe this compound will play a more active role in future production and life.

Example 26 1- [(6-Aminopyridin-3-yl)methyl]-3-{[4-(diffuromethoxy)phenyl]amino}-4-phenyl- 1H-PYRROLE-2, 5-dione A mixture of tert-butyl {5- [ (3-chloro-2, 5-dioxo-4-phenyl-2, 5-dihydro-lH-pyrrol-l- yl) methyl]pyridin-2-yl} carbamate (0.70 g, 1.7 mmol) and 4- (difluoromethoxy)-aniline (0.54 g, 3.4 mmol) in DMF (4 mL) was heated in a microwave reactor at 150C for eight min.. The sovent was evaporated and the residue was purified on a column (ISOLUTE SI, LOG/70 mL), using CH2Cl2 and then CH30H/CH2C12 (1: 99,2 : 98 and then 5: 95) as eluant, to give 0.4 g (54%) of the title COMPOUND. 1H NMR (400 MHz, CDC13) 8 7.99 (bs, 1H), 7.67-7. 62 (m, 2H), 7.14-7. 04 (m, 3H), 6.91 (d, J =8 Hz, 2H), 6.78 (d, J=8 Hz, 1H), 6.72 (d, J=9 Hz, 2H), 6.63 (d, J=9 Hz, 2H), 6.33 (t, J=74 Hz, 1H), 4.60 (s, 2H).

The chemical industry reduces the impact on the environment during synthesis 4-(Difluoromethoxy)aniline. I believe this compound will play a more active role in future production and life.

Reference:
Patent; ASTRAZENECA AB; WO2005/5417; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem