Tag: M.W=100-200

Related Products of 41365-75-7, The chemical industry reduces the impact on the environment during synthesis 41365-75-7, name is 1-Amino-3,3-diethoxypropane, I believe this compound will play a more active role in future production and life.

Step 1 : N-(3,3-diethoxypropyl)pyridine-3-carboxamide (2a) Pyridine-3-carbonyl chloride (10 g, 56.2 mmoles, 1 eq.) was dissolved in DMF (50 mL) and CH3CN (200 mL) with TEA (19.5 mL, 140.4 mmoles, 2.5 eq.). 3,3-diethoxypropan-1 -amine (10.35 g, 70.2 mmoles, 1 .25 eq.) in CH3CN (20 mL) was added at 0C. The solution was stirred overnight then was concentrated, diluted with DCM and washed with sat. NaHC03 and brine. The organic phase was then separated, dried over sodium sulphate and evaporated in vacuum to obtain N-(3,3-diethoxypropyl)pyridine-3- carboxamide 2a (6.8 g, Y= 45%). LC-MS (M-H+): 253.0.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Amino-3,3-diethoxypropane, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; AZIENDE CHIMICHE RIUNITE ANGELINI FRANCESCO A.C.R.A.F. S.P.A.; OMBRATO, Rosella; GAROFALO, Barbara; MANGANO, Giorgina; CAPEZZONE DE JOANNON, Alessandra; CORSO, Gaia; MAGARO’, Gabriele; FURLOTTI, Guido; IACOANGELI, Tommaso; (108 pag.)WO2016/96631; (2016); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Some common heterocyclic compound, 321-28-8, name is 1-Fluoro-2-methoxybenzene, molecular formula is C7H7FO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C7H7FO

The crude product (1.0 g, 7.9 mmol) was dissolved in acetonitrile (15 mL) and N-bromosuccinimide (1.4 g, 8.7 mmol) was added and reacted at 70 C for 3 h. After the reaction was completed, most of the acetonitrile was distilled off, 30 mL of water was added, the mixture was stirred for 10 min and extracted with ethyl acetate (3 × 20 mL). The combined organic phases were dried over anhydrous magnesium sulfate and separated by column chromatography (pure petroleum ether as eluent) The brominated product (intermediate A_2c) was obtained as a light yellow oily liquid (1.4 g, yield 86%) oA-2c: SH (300 MHz; CDCl 3) 7.23-7.16 (2H, m), 6.82 (D, J = 8.7Hz), 3.86 (3H, s); delta (75MuEtazeta; CDC13) 152.3 (d, Jc, F = 249.0Hz), 147.1 (d, 119.6 (d, J = 21.1 Hz), 114.6 (d, J = 2.2 Hz), 111.9 (d, J = 8.2 Hz), 56.4

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 321-28-8, its application will become more common.

Reference:
Patent; Chinese Academy Of Sciences Chemical Institute; Yu Chuyi; Li Yixian; Jia Tengdun; Zhao Xuan; (27 pag.)CN104557654; (2017); B;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 60792-79-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 60792-79-2 name is 2,2′-Oxybis(ethylamine) dihydrochloride, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

N,N-(2,2′-oxybis(ethane-2.1-divfflbis(2,4,6-trimethylaniline) (Example 1 1) [0088] In a drybox, 2,4,6-trimethylbromobenzene (500.0 muL, 3.27 mmol), 2,2′- oxydiethylamine dihydrochloride (289.3 mg, 1.63 mmol), sodium terf-butoxide (706.5 mg, 7.35 mmol), 4.0 mL of dimethyoxyethane, and 10.0 mM Pd(OAc)2 / CyPF-r-Bu (81.8 muL, 8.18 x 10-4 mmol) were added to a 20 mL scintillation vial equipped with a magnetic stirbar and sealed with a cap containing a PTFE septum. The reaction was placed into a temperature controlled aluminum heating block and stirred at 100 0C for 6 h. After cooling to room temperature, the reaction mixture was partitioned between 100 mL H2O/Et2O (1 :1), the organic phase separated and dried over MgSO4, followed by the removal of all volatiles to afford 505 mg (91.0 %) of the title compound.[0089] 1H NuMR spectra were obtained at 400 MHz and recorded relative to residual protio solvent. 13C NuMR spectra were obtained at 101 MHz and recorded relative to the residual solvent resonance. The spectra recorded are as follows:Eta NuMR (CDC13, 400 MHz, 22 0C): delta 2.24 (s, 6H), 2.28 (s, 12H), 3.15 (t, J= 5.0 Hz, 4H), 3.49 (br s), 3.61 (t, J = 5.0 Hz, 4H), 6.84 (s, 4H). 13C NuMR (CDCI3, 101 MHz, 22 0C): delta 18.2, 20.5, 48.2, 70.4, 129.4, 129.8, 131.3, 143.1.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2,2′-Oxybis(ethylamine) dihydrochloride, and friends who are interested can also refer to it.

Reference:
Patent; UNIVATION TECHNOLOGIES, LLC; JOHNS, Adam, M.; WO2010/53696; (2010); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 1758-46-9 as follows. Quality Control of 2-Phenoxyethylamine

d) (6-Chloro-4-methyl-3,4-dihydro-quinazolin-2-yl)-(2-phenoxy-ethyl)-amine 6-Chloro-4-methyl-2-methylsulfanyl-3,4-dihydro-quinazoline hydroiodide (106 mg, 0.30 mmol) and 2-phenoxyethyl amine (168 mg, 1.2 mmol) were dissolved in acetonitrile (0.9 ml) and heated to 170° C. in a sealed tube in a microwave oven for 30 minutes. After cooling the reaction was treated with 1N aqueous sodium hydroxide solution, methylene chloride and 5 to 7 drops of 30percent aqueous hydrogen peroxide solution. After the reaction has ceased the layers were separated and the aqueous phase was extracted with methylene chloride. The combined organic layers were dried over sodium sulfate, filtered, the solvent was evaporated and the residue was purified by column chromatography (CH2Cl2:MeOH:aq conc NH3=9:1:0.1) to yield the title compound as a white solid (88 mg, 93percent). (MS: m/e=316.0, 318.0 [M+H+]). 1H NMR (CDCl3): delta 1.23 (3H, d), 3.56 (2H, m), 4.05 (2H, t), 4.47 (1H, q), 5.95 (1H, bs), 6.27 (1H, bs), 6.69 (1H, d), 6.90-7.01 (4H, m), 7.29 (2H, t).

According to the analysis of related databases, 1758-46-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Alanine, Alexander; Gobbi, Luca Claudio; Kolczewski, Sabine; Luebbers, Thomas; Peters, Jens-Uwe; Steward, Lucinda; US2006/252779; (2006); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 645-36-3, These common heterocyclic compound, 645-36-3, name is 2,2-Diethoxyethanamine, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2,2-Diethoxyethylamine (430 muL, 2.95 mmol) and Na2CO3 (0.285g, 2.69 mmol) were added to a stirred soln of pyrimidine 717 (0.645g, 2.69 mmol) in i-PrOH (20 mL). After 5 min, H2O (50 mL) was added and the product was extracted with CH2Cl2 (2 × 50 mL). The organic layers were combined, washed with H2O (2 × 20 mL), dried(Na2SO4), and concentrated. The residue was purified by flash chromatography[silica gel, hexane-benzene (1:1); Rf = 0.15] to give a yellow solid; yield: 0.40 g (44%); mp 71.5-73.5 C.IR (KBr): 3364 (NH) cm-1.1H NMR (300 MHz, CDCl3): delta = 1.28 (t, J = 7.2 Hz, 6 H, 2 × CH3),2.58 (s, 3 H, SCH3), 3.61 (dq, 2J = 9.3 Hz, 3J = 7.2 Hz, 2 H,2 × CHAHBCH3), 3.73-3.85 (m, 4 H, NCH2 and 2 × CHAHBCH3),4.69 (t, J = 5.4 Hz, 1 H, OCH), 8.17 (br s, 1 H, NH).13C NMR (75 MHz, DMSO-d6): delta = 14.5, 15.7, 44.3, 62.3, 99.8,124.6, 152.6, 154.6, 173.0.Anal. Calcd for C11H17ClN4O4S: C, 39.23; H, 5.09. Found: C,39.21; H, 5.07.

The synthetic route of 645-36-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Juskenas, Robertas; Masevicius, Viktoras; Tumkevicius, Sigitas; Synthesis; vol. 45; 17; (2013); p. 2438 – 2446;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 54149-17-6, These common heterocyclic compound, 54149-17-6, name is 1-Bromo-2-(2-methoxyethoxy)ethane, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2,7-dibromofluorene (Sigma Aldrich) (15.7 g, 0.048 mol) was dissolved in anhydrous tetrahydrofuran (150 mL) and cooled to 5 C. under argon atmosphere. Sodium tert-butoxide (10.5 g, 0.109 mol) was added portionwise, giving a deep red colour. After completion of addition, the reaction mixture was stirred at room temperature for 20 minutes. A solution of 1-bromo-2-(2-methoxyethoxy)ethane (Sigma Aldrich) (20 g, 0.109 mol) in anhydrous THF (50 mL) was added dropwise. The solution turned dark purple and an exotherm to 30 C. was observed. The reaction mixture was stirred at room temperature for 72 hours then diluted with water and ethyl acetate. The layers were separated and the aqueous phase extracted with ethyl acetate (2*). The combined organic layers were washed with water and brine then dried (Na2SO4) and filtered. Concentration of the filtrates in vacuo followed by purification of the residue by dry flash chromatography (0 to 40% ethyl acetate in heptane) gave 2,7-dibromo-9,9-Bis[2-(2-methoxyethoxy)ethyl]-9H-fluorene as a yellow oil (10 g, 40%). 1H NMR (300 MHz, CDCl3) 7.52-7.42 (m, 6H), 3.27 (m, 10H), 3.16 (m, 4H), 2.76 (m, 4H), 2.34 (m, 4H).

Statistics shows that 1-Bromo-2-(2-methoxyethoxy)ethane is playing an increasingly important role. we look forward to future research findings about 54149-17-6.

Reference:
Patent; Wuhan Xinqu Chuangrou Optoelectronics Technology Co., Ltd.; SIMMS, Michael James; OGIER, Simon Dominic; (47 pag.)US2019/131533; (2019); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

3616-56-6, name is 2,2-Diethoxy-N,N-dimethylethanamine, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: ethers-buliding-blocks

Synthesis Example B6Synthesis of 12H-benzofuranyl[3,2-a]carbazole (compound 6)Compound 5 (2.8 g, 1 eq.) is added to acetic acid (30 ml) and heated to reflux. (Dimethylamino)acetaldehyde diethyl acetal (95percent; 20.3 g, 10 eq.) is added dropwise in portions to the solution.The reaction is stirred at reflux overnight.Then further (dimethylamino)acetaldehyde diethyl acetal (95percent; 2.0 g) is added and stirred further at reflux after 3 h.Subsequently, the flask contents are diluted with CH2Cl2 at room temperature and washed in a separating funnel with distilled water and NaCl (saturated).Organic phase is dried with Na2SO4 and concentrated. LC (SiO2, 15:85 ethyl acetate/cyclohexane) gives the product 6 (1.92 g, 62.2percent yield).1H NMR (CD2Cl2, 400 MHz): delta=8.88 (br s, 1H), 8.16 (d, 1H), 8.12 (d, 2H), 7.66 (d, 1H), 7.62 (d, 1H), 7.42-7.53 (m, 4H), 7.31 (dd, 1H).

The synthetic route of 3616-56-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BASF SE; OSRAM OPTO SEMICONDUCTORS GMBH; KONINKLIJKE PHILIPS ELECTRONICS N.V.; US2011/266528; (2011); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 6851-80-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6851-80-5, name is 1-(2-Methoxyphenyl)-N-methylmethanamine belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: The mixture of secondary amine (1.01 mmol) and paraformaldehyde(1.01 mmol) in ethanol (3 mL) was refluxed for 1 h,until paraformaldehyde was dissolved. Then compound 5 or 6(100 mg, 0.34 mmol) was added in one portion. The reactionmixture was refluxed for 24e48 h. Ethanol was removed underreduced pressure. The residue was diluted with water and acidifiedwith an aqueous solution of hydrochloric acid (10%). The aqueousphase was washed with CH2Cl2, and then basified with saturatedNaHCO3 solution. The alkaline aqueous phase was again extractedwith CH2Cl2. The combined organic phase washed with brine, driedover Na2SO4, filtered and concentrated under reduced pressure toafford the corresponding crude aurone Mannich base derivatives.Additionally, compounds 8a-b and the corresponding 9a-b wereobtained in one pot.

The synthetic route of 1-(2-Methoxyphenyl)-N-methylmethanamine has been constantly updated, and we look forward to future research findings.

Reference:
Article; Li, Yan; Qiang, Xiaoming; Luo, Li; Yang, Xia; Xiao, Ganyuan; Liu, Qi; Ai, Jiachen; Tan, Zhenghuai; Deng, Yong; European Journal of Medicinal Chemistry; vol. 126; (2017); p. 762 – 775;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 102503-23-1, name is 1-(2,4-Dimethoxyphenyl)-N-methylmethanamine, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 102503-23-1, HPLC of Formula: C10H15NO2

Sodium hydride (60% in oil, 2.23 g, 55.8 mmol) was washed twice with n-hexane and suspended in THF (180 mL). A solution of 1-(2,4-dimethoxyphenyl)-N-methylmethanamine (9.09 g, 50.2 mmol) in THF (10 mL) was added dropwise to this suspension at 0 C, and then the mixture was stirred at 60 C for 18 h. After cooled to 0 C, a solution of compound 15 (9.64 g, 45.4 mmol) in THF (10 mL) was added dropwise, and then the mixture was stirred at the same temperature for 1 h. Ice-cooled solution of NaCl were added, and the mixture was extracted with EtOAc. The extract was washed successively with a solution of NH4Cl, a solution of NaHCO3, H2O and brine, dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure. The residue was purified by basic silica gel column chromatography (EtOAc) to obtain compound 16 (16.8 g, 99%) as a yellow oil. 1H-NMR (CDCl3) d 2.24 (3H, s), 3.51 (2H, s), 3.54 (2H, s), 3.79 (3H, s), 3.80 (3H, s), 6.45 (1H, s), 6.42-6.50 (1H, m), 6.68 (1H, dd, J = 4.7 Hz, 3.6 Hz), 7.18-7.29 (2H, m), 7.98 (1H, ddd, J = 4.5 Hz, 1.9 Hz, 1.5 Hz), 8.25 (1H, ddd, J = 10.2 Hz, 8.0 Hz, 1.9 Hz), 8.67 (1H, s).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Nishida, Haruyuki; Fujimori, Ikuo; Arikawa, Yasuyoshi; Hirase, Keizo; Ono, Koji; Nakai, Kazuo; Inatomi, Nobuhiro; Hori, Yasunobu; Matsukawa, Jun; Fujioka, Yasushi; Imanishi, Akio; Fukui, Hideo; Itoh, Fumio; Bioorganic and Medicinal Chemistry; vol. 25; 13; (2017); p. 3447 – 3460;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 22236-10-8, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 22236-10-8 name is 4-(Difluoromethoxy)aniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Example 12; 2-ButyI-5-(4-chIorophenyl)-4-{[4-(difluoromethoxy)phenyl]amino}isothiazol-3(2H)-one 1,1-dioxide; 2-Butyl-4-chloro-5-(4-chlorophenyl)isothiazol-3(2H)-one 1,1-dioxide (0.2Og, 0.60mmol) and 4-(difiuoromethoxy)-aniline (0.19Og, 1.20mmol) were mixed in MeCN (2.5mL). The mixture was heated in a microwave reactor at 130 C for 15 mins, then additional 60 mins and then at 140 0C for 15 mins, then additional 30 mins. The mixture was evaporated and the residue was purified by column chromatography (ISOLUTE SI 20 g/70 mL), eluting with heptane, then DCM:heptane (25:75, then 50:50), to give the title compound (0.122g, 45%);

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-(Difluoromethoxy)aniline, and friends who are interested can also refer to it.

Reference:
Patent; ASTRAZENECA AB; WO2006/73363; (2006); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem