Tag: M.W=100-200

Some common heterocyclic compound, 645-36-3, name is 2,2-Diethoxyethanamine, molecular formula is C6H15NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C6H15NO2

[00114] To a glass reactor was charged 3,5-dichlorobenzaldehyde. Absolute ethanol was added to the batch slowly (this addition is mildly exothermic) and agitation started. 2,2- Diethoxyethylamine (1.03 equiv) was slowly added to the batch, keeping the batch temperature at 20-78 C. The batch was then heated to 76-78 C for 2 h. GC-MS analysis indicated reactioncompletion (starting material < 1%). The batch was cooled to ambient temperature for work-up. The batch was concentrated in vacuo to a residue and azeotroped with heptanes (x2). The residue was cooled and held at 0-5 C for 12 h to form a suspension. The solids were collected by filtration and the cake was washed with cold (0-5 C) heptanes, and dried under hot nitrogen (45-5 0 C) to afford Compound 2? as a white solid (94% yield). These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 645-36-3, its application will become more common. Reference:
Patent; SARCODE BIOSCIENCE INC.; ZELLER, James, Robert; VENKATRAMAN, Sripathy; BROT, Elisabeth, C.A.; IYER, Subashree; HALL, Michael; WO2014/18748; (2014); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 171290-52-1, The chemical industry reduces the impact on the environment during synthesis 171290-52-1, name is 3,5-Dimethoxyphenylacetylene, I believe this compound will play a more active role in future production and life.

(S) -3- (5-amino-3-bromo-4-cyano-1H -Pyrazol-1-yl) pyrrolidine-1-carboxylic acid third butyl ester 7c (5g, 14.1mmol), cuprous iodide (0.6g, 2.8mmol), triethylamine (9mL), [1,1′-bis (diphenylphosphino) ferrocene] palladium dichloride (2g, 2.8mmol) And N, N-dimethylformamide (150mL) were heated to 80 C under the protection of argon, and 1-ethynyl-3,5-dimethoxybenzene (14g, 84.5mmol) was added in portions. And stir for 2 hours.After cooling to room temperature, the reaction solution was poured into water and extracted with ethyl acetate (200 mL × 3).The organic phases were combined, dried over anhydrous sodium sulfate, filtered to remove the drying agent, and concentrated under reduced pressure. The residue was purified by silica gel column chromatography (petroleum ether / ethyl acetate = 5/1) to obtain the target product (S) -3- ( 5-amino-4-cyano-3-((3,5-dimethoxyphenyl) ethynyl) -1H-pyrazol-1-yl) pyrrolidine-1-carboxylic acid third butyl ester 7d (5 g, brown oil), yield: 81%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3,5-Dimethoxyphenylacetylene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BEIJING TIANCHENG PHARMA CO., LTD.; CHEN, XIANGYANG; GAO, YINGXIANG; KONG, NORMAN XIANGLONG; (118 pag.)TW2019/38538; (2019); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 93919-56-3,Some common heterocyclic compound, 93919-56-3, name is (4-(Trifluoromethoxy)phenyl)methanamine, molecular formula is C8H8F3NO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

[000214] To a stirred solution of 6 (40 mg, 0.14 mmol) in DMF (3 mL) under argon atmosphere was added CDI (71.7 mg, 0.17 mmol) at 0 C; warmed to RT and stirred for 2 h. To this were added (4-(trifluoromethoxy) phenyl) methanamine 172 (33.8 mg, 0.17 mmol), and diisopropyl ethyl amine (0.05 mL, 0.29 mmol) and stirred for 16 h. The reaction was monitored by TLC; after completion of the reaction, the reaction mass was diluted with water (15 mL) and stirred for 1 h. The precipitate was filtered or extracted with EtOAc or CH2C12 and the obtained solid was dried in vacuo or purified by column chromatography or triturated to afford the desired product.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route (4-(Trifluoromethoxy)phenyl)methanamine, its application will become more common.

Reference:
Patent; INDIANA UNIVERSITY RESEARCH AND TECHNOLOGY CORPORATION; ASSEMBLY BIOSCIENCES, INC.; TURNER, William W.; ARNOLD, Lee Daniel; MAAG, Hans; ZLOTNICK, Adam; WO2015/138895; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 2752-17-2, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 2752-17-2 as follows.

Compounds 1 and 2 were prepared by the following procedure: 2-(4-chloro-3-nitrophenyl)-2-oxoethyl 2-aminobenzoate or 2-(4-amino-3-nitrophenyl)-2-oxoethyl 2-aminobenzoate (44.8 mmol) was suspended in polyphosphoric acid (167.3 g). The reaction mixture was heated to 100 C and stirred for 90 min. The mixture was then poured into H2O/crushed ice (700 ml). The precipitated product was filtered, washed with H2O, dried and recrystallized from 2-methoxyethanol. Compounds 3-17 were prepared by the following general procedure: quinolinone 1 (200 mg, 0.63 mmol) was added to a solution of amine (6.3 mmol) and N-methylpyrrolidone (1.0 ml) and the mixture was stirred at 110 C for 2 h. After cooling to room temperature, H2O (20 ml) was added and the pH adjusted to 7 with dilute HCl (1:3). The precipitated solid was collected by suction, washed thoroughly with H2O and dried at 80 C. The crude product was recrystallized from 2-methoxyethanol.

According to the analysis of related databases, 2752-17-2, the application of this compound in the production field has become more and more popular.

Reference:
Article; Motyka, Kamil; Hlava?, Jan; Soural, Miroslav; Hradil, Pavel; Krej?i, Petr; Kvapil, Lubomir; Weiss, Milo?; Tetrahedron Letters; vol. 52; 6; (2011); p. 715 – 717;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 62257-15-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 62257-15-2, name is 2-Fluoro-5-methoxyaniline, This compound has unique chemical properties. The synthetic route is as follows.

Compound 78 (4 g, 28.34 mmol) was suspended in 40 mL DI water, to which Acetic anhydride (10.72 mL, 113.4 mmol) was added dropwise. The reaction mixture was placed in an (0814) ultrasonication bath for 1 min, then was stirred in a water bath (50 C) for 10 min. The resulting solution was stirred overnight at rt. After which, the solid was collected via vacuum filtration and washed with small portions of DI water. The product was left in the funnel and air dried overnight to afford compound 79 (4.71 g, 91%) as a brown solid, which was used for the next step without further purification.

The chemical industry reduces the impact on the environment during synthesis 2-Fluoro-5-methoxyaniline. I believe this compound will play a more active role in future production and life.

Reference:
Patent; OREGON HEALTH & SCIENCE UNIVERSITY; GIBBS, Summer L.; WANG, Lei G.; BARTH, Connor W.; (159 pag.)WO2020/23911; (2020); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 1579-40-4, A common heterocyclic compound, 1579-40-4, name is Di-p-tolyl Ether, molecular formula is C14H14O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

In einem mit Argon begasten 100 ml Reaktor werden 2 g 4, 4′-OXYBIS (toluen) (CAS Reg. Nr. 1579-40-4) [10 MMOL] in 39.2 ml Acetonitril unter Zusatz von 1.5 ml Methylphenylsulfoxid [11. 0 mmol] bei 75 C geloest. Zur Loesung werden 60 mg Cu (OAc) 2, 30 mg FES04-7 H20 und 10 ML Wasser beigefuegt. 16.2 g NA2S208 geloest in 30 ml Wasser werden anschliessend unter heftigem Ruehren zugetropft. Nach 45 Minuten ist die Reaktion beendet. Die organische Phase wird mit Ethylacetat erschoepfend extrahiert. Die Ausbeute des Dialdehyds 4, 4′-OXYBIS (BENZALDEHYD) (CAS Reg. Nr. 2215-76-1) betraegt 84 MOL%.

The synthetic route of 1579-40-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TEX-A-TEC AG; WO2004/43891; (2004); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 171290-52-1, These common heterocyclic compound, 171290-52-1, name is 3,5-Dimethoxyphenylacetylene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solution of the azide intermediate (0.1 mmol) in 0.2 mL of DMFin a microwave tube, CuSO4 (0.05 mmol) diluted in 50.0 muL of water,sodium ascorbate (0.025 mmol) and the alkyne (0.2 mmol) were added.The tube was sealed and the solution was irradiated (70 C, 150 W) for10 min and, then, TLC analysis showed the complete consumption ofthe starting material. The reaction was diluted with 15 mL of brine,extracted with ethyl acetate (3×10 mL), dried by anhydrous Na2SO4and concentrated under reduced pressure. The resulting crude productwas purified by column chromatography on silica gel [hexane: ethylacetate, 60:40% (v/v)] yielding the expected product.

Statistics shows that 3,5-Dimethoxyphenylacetylene is playing an increasingly important role. we look forward to future research findings about 171290-52-1.

Reference:
Article; Zimmermann, Lara A.; de Moraes, Milene H.; da Rosa, Rafael; de Melo, Eduardo B.; Paula, Favero R.; Schenkel, Eloir P.; Steindel, Mario; Bernardes, Lilian S.C.; Bioorganic and Medicinal Chemistry; vol. 26; 17; (2018); p. 4850 – 4862;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 36865-41-5, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 36865-41-5, name is 1-Bromo-3-methoxypropane, This compound has unique chemical properties. The synthetic route is as follows.

A stirred solution of intermediate 23 (0.21 g, 0.53 mmol) in DMF (4.0 ml) at ambienttemperature was treated with sodium hydride (60% in mineral oil, 0.023 g, 0.58 mmol). After 5 minutes, the mixture was treated with 1 -bromo-3-methoxypropane (0.09 g, 0.58 mmol) and the resulting mixture was stirred at 50 C for 2.0 hours. The mixture was cooled to ambient temperature and partitioned between EtOAc and brine. The organic phase was dried over Na2SO4 and concentrated in vacuo. Trituration of the residue withEt20 afforded the desired product as a yellow solid (0.21 g, 88%). LCMS (Method B): R= 4.43 mi mlz [M+Hjb = 466/468/470.

The chemical industry reduces the impact on the environment during synthesis 1-Bromo-3-methoxypropane. I believe this compound will play a more active role in future production and life.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; HYND, George; TISSELLI, Patrizia; MACLEOD, Calum; MANN, Samuel, Edward; PANCHAL, Terry, Aaron; MONTANA, John, Gary; PRICE, Stephen, Colin; (74 pag.)WO2016/62790; (2016); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 4393-09-3, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 4393-09-3 name is (2,3-Dimethoxyphenyl)methanamine, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To the mixture of 5-nitro-furan-2-carbonyl chloride (877 mg, 5 MMOL) in CH2CI2 (10 ml) was added to 2,3-dimethoxy benzyl amine (0.734 ML, 5 MMOL) in Et3N (3 ML) and reaction was stirred for 14 hr. at room temperature. The reaction was followed as explained in method 2 to yield 830 mg (54%) of compound 53. Rf 0. 48 (1: 1 hexane: ethyl ACETATE). 1HNMR (500 MHz, CDCIS) : E53. 90 (3H, s), 3.95 (3H, s) 4.65 (2H, d, J = 6. 10 Hz), 6.92 (2H, dd, J = 1. 46,7. 05 HZ), 6.95 (1 H, dd, J = 1.46, 7. 81 Hz), 7.03-7. 09 (3H, m) ; 13CNMR (300 MHz, CDC13) : 38.91, 55.21, 60.19, 111. 88, 115.27, 120. 84, 123.63, 130.04, 146.76, 147.66, 152.11, 155.54 ; EL-MASS : 329 (M++23), 305 (M+-1) ; IR : 1671,3323 cm-1.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (2,3-Dimethoxyphenyl)methanamine, and friends who are interested can also refer to it.

Reference:
Patent; THE UNIVERSITY OF TENNESSEE RESEARCH FOUNDATION; COLORADO STATE UNIVERSITY RESEARCH FOUNDATION; WO2005/7625; (2005); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 39538-68-6, name is 2-Methoxy-4-methylaniline, A new synthetic method of this compound is introduced below., Computed Properties of C8H11NO

General procedure: In a threaded ACE glass pressure tube with a sealed Teflon screw cap equipped with a magnetic stirring bar, a mixture of 11a (0.200 g, 1.65 mmol), 12a (0.185 g, 1.65 mmol), p-TsOH (0.028 g, 0.16 mmol), and MS 4A (0.20 g) in toluene (10 mL) was stirred and heated at 130 C for 4.5 h under microwave irradiation (100 W). The solvent was removed under vacuum and the residue purified by column chromatography (silica gel, hexane-EtOAc, 98:2) to give 7a (0.32 g, 91%) as a brownishoil; Rf = 0.75 (hexane-EtOAc, 7:3).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Hernandez-Benitez, R. Israel; Zarate-Zarate, Daniel; Delgado, Francisco; Tamariz, Joaquin; Synthesis; vol. 49; 18; (2017); p. 4357 – 4371;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem