Ethers-buliding-blocks

These common heterocyclic compound, 6443-69-2, name is 1,2,3-Trimethoxy-5-methylbenzene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 1,2,3-Trimethoxy-5-methylbenzene

Eine Loesung von 1047 g (3,973 mol) 5-Brom-2-methoxy-6-methylben- ZOESaeURECHLORID in 1715 g Chlorbenzol wurden mit 0,72 g (0,0044 mol) (Beispiele 1 bis 4und 7) bzw. 0,36 g (0,0022 mol) (Beispiel 5) bzw. 0,18 g (0,0011 mol) (Beipiel 6) wasserfreiem Eisen- (III) chlorid versetzt und zu einer Loesung von 868,7 g (4,768 mol) 3,4, 5-Trimethoxytoluol in 467,8 g Chlorbenzol bei der in der Tabelle angegebenen Reaktionstemperatur waehrend 4 h dosiert. An- schliessend wurde das Reaktionsgemisch 2 h bei Reaktionstemperatur nachgeruehrt. Zur Entfernung der entstandenen HC1 wurde waehrend der Dosier-und Nachruehrzeit ein konstanter Stickstoffstrom durch das Reaktionsgemisch geleitet (der jeweilige Volumenstrom kann der Tabelle entnommen werden). Anschliessend wurde das Chlorbenzol bei 80 mbar und Temperaturen von 80-105C abdestilliert. Reinheit und Ausbeute der rohen Produktschmelze wurden vor Kristallisation mittels quantitativer HPLC analysiert (Ergebnisse siehe Tabelle). Zur Kristallisation des 5-Bromo-2′, 6-dimethyl-2,4′, 5′, 6′-tetrame- thoxybenzophenons (I’) wurden 4900 g Methanol bei 50C vorgelegt und die 105C heisse Schmelze eingetragen. Die Kristallisation er- folgte durch Abkuehlung mittels einer Temperaturrampe bis AUF-5C. Die Titelverbindung wurde durch Zentrifugation isoliert, auf der Zentrifuge mit Methanol gewaschen und getrocknet.

The synthetic route of 1,2,3-Trimethoxy-5-methylbenzene has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BASF AKTIENGESELLSCHAFT; WO2004/54953; (2004); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

These common heterocyclic compound, 22236-08-4, name is 3-(Difluoromethoxy)aniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of 3-(Difluoromethoxy)aniline

A solution of 4-chloro-6-nitro-2- (pyrazin-2-yl) quinazoline (1.00 g, crude, 3.7 mmol, 1.0 equiv), 3- (difluoromethoxy) benzenamine 600 mg, 3.7 mmol, 1.0 eq) and Et 3 N (1.00 g, 10 mmol, 3.0 eq) was stirred at 75 C. for 18 h. After cooling, the volatiles were removed in vacuo and the residue was washed with H 2 O (100 mL × 2). The solid was dried in vacuo to give 1.40 g of N- (3- (difluoromethoxy) phenyl) -6-nitro-2- (pyrazin-2-yl) quinazolin-4-amine as a black solid 90.2% at the stage). LCMS m / z = 411.0 (M + 1) (Method A) (retention time = 1.61 min).

The synthetic route of 3-(Difluoromethoxy)aniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; OTSUKA PHARMACEUTICAL COMPANY LIMITED; SUZUKI, MASAKI; KONDO, KAZUMI; KURIMURA, MUNEAKI; VALLURU, KRISHNA REDDY; TAKAHASHI, AKIRA; KURODA, TAKESHI; TAKAHASHI, HARUKA; FUKUSHIMA, TAE; MIYAMURA, SHIN; GHOSH, INDRANATH; DOGRA, ABHISHEK; HARRIMAN, GERALDINE; ELDER, AMY; SHIMIZU, SATOSHI; HODGETTS, KEVIN J; NEWCOM, JASON S; (678 pag.)JP6121658; (2017); B2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 156573-09-0, The chemical industry reduces the impact on the environment during synthesis 156573-09-0, name is 1-Bromo-4-ethoxy-2,3-difluorobenzene, I believe this compound will play a more active role in future production and life.

According to the synthetic scheme shown above, compound (T-2) (129.5 g) obtained as an intermediate of Example 1 was dissolved in DryTHF (500 ml), and the resultant solution was cooled to -70C. In a nitrogen atmosphere, n-BuLi (500 ml) was added dropwise, and agitation was carried out at -70C for 2 hours. Then, a DryTHF solution of trimethyl borate (129.5 g) was slowly added dropwise at -70C, and the resultant solution was heated to room temperature and agitated for 16 hours. After completion of the reaction, 2N-HCl (200 ml) was added, and then extraction was carried out with toluene, an organic layer was washed with water and a saturated aqueous solution of sodium chloride, and then the resultant solution was dried over anhydrous magnesium sulfate and concentrated under reduced pressure, and thus a light brown solid was obtained. The resultant material was subjected to recrystallization (heptane: toluene = 4 : 1 in a volume ratio), and thus (T-20) was obtained as a colorless crystal (117.2 g, yield: 71%).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Bromo-4-ethoxy-2,3-difluorobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; JNC Corporation; JNC Petrochemical Corporation; EP2484658; (2012); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 111-95-5,Some common heterocyclic compound, 111-95-5, name is Bis(2-methoxyethyl)amine, molecular formula is C6H15NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

EXAMPLE 5 Synthesis of DTPA bis(di(2-methoxyethyl-amide)(3) 12.4 ml of bis(2-methoxyethyl)amine (0.084 mol), dissolved in 40 ml of anhydrous DMF, are added dropwise to 5_grams of DTPA anhydride (0.014 mol), dissolved in 80_ml of anhydrous DMF, under argon at 80 C. The reaction medium is kept stirred for 24 hours.After concentrating and addition of diethyl ether, the oily precipitate is separated from the solvents by settling.This residue is dissolved in the minimum amount of CHCl3 and reprecipitated from Et2O. After drying under vacuum, a hygroscopic foam (3) is obtained (6.43 g, yield of 74%), used without additional purification. 1H NMR (D2O+NaOD): 2.50 (t, 4H), 2.52 (t, 4H), 2.98 (s, 2H), 3.11 (s, 4H), 3.31 (s, 6H), 3.32 (s, 6H), 3.51 (s, 4H), 3.53-3.56 (m, 16H).13C NMR (D2O): 45.94, 47.03, 47.81, 49.75, 53.69, 56.29, 57.78, 67.16, 69.56, 69.69 (CH2); 58.63, 59.07 (OCH3); 166.9, 170.5, 175.7 (CO2H and CO). ES-MS: ES-: 622.1 ([M-H]-), ES+: 624.3 ([M+H]+), 646.2 ([M+Na]+).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Bis(2-methoxyethyl)amine, its application will become more common.

Reference:
Patent; Lemaire, Marc; Foos, Jacques; Guy, Alain; Chitry, Frederic; Pellet-Rostaing, Stephane; Vigneau, Olivier; US2004/81604; (2004); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 104197-14-0, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 104197-14-0 name is 4-Bromo-2,6-difluoroanisole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

Intermediate 112 2-(3,5-difluoro-4-methoxyphenyl)-4,4,5,5-tetramethyl-1,3,2-dioxa borolane To a solution of intermediate 111 (2.0 g, 8.968 mmoles) in Dioxan (40 ml), bis(pinacaloto)diboron (2.73 g, 10.76 mmoles) and potassium acetate (2.64 g, 26.90 mmoles) were added and the system is degassed for 30 min Bis(diphenylphosphinoferrocene)dichloro palladium.CH2Cl2 (0.219 g, 0.269 mmoles) was added under nitrogen atmosphere and heated to 80 C. After 12 h, the reaction mixture filtered through celite and concentrated. The crude product was purified by column chromatography with ethyl acetate:petroleum ether to afford the title compound as yellow liquid (2.2 g, 90% yield).). 1H-NMR (delta ppm, DMSO-d6, 400 MHz): delta delta 7.318 (d, J=8.7 Hz, 2H), 4.02 (s, 3H), 1.32 (s, 12H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-Bromo-2,6-difluoroanisole, and friends who are interested can also refer to it.

Reference:
Patent; Rhizen Pharmaceuticals SA; Incozen Therapeutics Pvt. Ltd.; US2011/118257; (2011); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

954235-83-7, name is 1-Bromo-2-(difluoromethoxy)-4-fluorobenzene, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 954235-83-7

A mixture of l-bromo-2-(difluoromethoxy)-4-fIuorobenzene (intermediate 176a, 70 mg), N-[3- chloro-4-(4,4,5,5-tetramethyl-l,3,2-dioxaborolan-2-yl)phenyl]-2-[4-(ethylsulfonyl)phenyl]acetamide (intermediate 6b, 148 mg), PdCl2(dppi)-CH2CI2 adduct (18.98 mg) and Cs2C03 (114 mg) in acetonitrile (1.5 mL)/water (0.5 mL) was sealed in a vessel and heated in (lie microwave at 100C for 45 mins. The reaction mixture was filtered through celite and silica gel. The filtrate was concentrated under reduced pressure and the residue was purified by MDAP to afford N-(2-chloro-2′- (difluoromethoxy)-4′-fluoro-[l, -biphenyl]-4-yl)-2-(4-(ethylsulfonyl)phenyl)acetamide (22 mg) as a white solid. ?-NMR (400 MHz, DMSO-<¾ delta ppm 1.10 (t, /= 7.2 Hz, 3H), 3.28 (q, J= 7.2 Hz, 2H), 3.84 (s; 2H), 7.21 (t, J= 73.2 Hz, 1H), 7.21 (m, 2H)} 7.28 (d, J - 8.4 Hz, 1H), 7.37 (m, 1H), 7.53 (dd, J= 2.0 Hz, 8.4 Hz, 1H), 7.62 (d, J= 8.0 Hz, 2H), 7.86 (d, J= 8.4 Hz, 2H), 7.91 (d, J= 2.0 Hz, 1H), 10.55 (s, 1H); 19F-NMR (376 MHz, DMSO-rf6) delta ppm -82.43, -110.64; MSiES4) m/? 498 (MH+). The synthetic route of 954235-83-7 has been constantly updated, and we look forward to future research findings. Reference:
Patent; GLAXO GROUP LIMITED; WANG, Yonghui; CAI, Wei; LIU, Qian; MENG, Qinghua; CHENG, Yaobang; YANG, Ting; ZHANG, Guifeng; XIANG, Jianing; WU, Chengde; WO2013/29338; (2013); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 710-18-9, A common heterocyclic compound, 710-18-9, name is 1-Methoxy-4-(trifluoromethoxy)benzene, molecular formula is C8H7F3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Under N2 atmosphere, an oven-dried 4 mL vial was charged with l-methoxy-4- (trifluoromethoxy)benzene (57.6 mg, 45.5 mu, 0.300 mmol, 1.00 equiv), palladium complex 1 (11.4 mg, 15.0 muetaiotaomicron, 5.00 mol ), Ag(bipy)2C104 (16.0 mg, 30.0 muetaiotaomicron, 10.0 mol ), and NFBS (0.189 g, 0.600 mmol, 2.00 equiv). Acetonitrile (0.75 mL, c = 0.40 M) was added and the reaction mixture was stirred in a sealed vial at 23 C for 24 h. Subsequently, triethylamine (30.5 mg, 42.0 mu, 0.300 mmol, 1.00 equiv) was added and the reaction mixture was concentrated in vacuo. The residue was purified by chromatography on silica gel, eluting with hexanes/EtOAc (19: 1 to 4: 1 (v/v) with 1% triethylamine), to afford 89.2 mg of the title compound as a colorless solid (61 yield). [00215] Rf = 0.30 (hexanes/EtOAc 4: 1 (v/v)). NMR Spectroscopy: 1H NMR (600 MHz, CDC13, 23 C, delta): 7.97 (d, J = 7.6 Hz, 4H), .65-1.69 (m, 2H), 7.54 (t, J = 7.6 Hz, 4H), 7.29 (dd, J = 9.5, 2.9 Hz, 1H), 6.95 (d, J = 2.9 Hz, 1H), 6.85 (d, J = 8.6 Hz, 1H), 3.43 (s, 3H). 13C NMR (125 MHz, CDC13, 23 C, delta): 156.8, 141.8, 139.8, 134.0, 128.9, 128.9, 126.5, 125.1, 123.4, 120.6 (q, J = 255 Hz), 112.4, 55.8. 19F NMR (375 MHz, CDC13, 23 C, delta): -59.9. Mass Spectrometry: HRMS (ESI-TOF) (m/z): calcd for C20H2oF3N206S2 [M + NH4]+, 505.0709, found, 505.0721.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; PRESIDENT AND FELLOWS OF HARVARD COLLEGE; NGAI, Ming-Yu; BOURSALIAN, Gregory, Bagrad; MCNEILL, Eric, Andrew; RITTER, Tobias; WO2015/31725; (2015); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 5111-65-9, These common heterocyclic compound, 5111-65-9, name is 2-Bromo-6-methoxynaphthalene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

6-Methoxy-2-bromonaphthalene (0.97 g, 4.1 mmol) was dissolved in 20 mL of dry THF, protected under nitrogen, (3.4 mL, 8.2 mmol) was added, stirred for 1 hour, and then anhydrous DMF (0.941 mL, 12.3 mmol) was added dropwise at -78 C,The reaction was continued at 78 C for 1 hour, rose to room temperature, acidified to pH = 5 with 2N hydrochloric acid, extracted with ethyl acetate, washed with water, saturated brine Washed with anhydrous sodium sulfate, filtered and concentrated, n-hexane / ethyl acetate (15: 1) column chromatography to isolate 6-methoxy-2-naphthyl Aldehyde, the yield of 88.6%.

Statistics shows that 2-Bromo-6-methoxynaphthalene is playing an increasingly important role. we look forward to future research findings about 5111-65-9.

Reference:
Patent; Liaocheng University; Liu Guoyun; Yang Jie; Li Xiaoteng; Guo Shangjing; (19 pag.)CN105111054; (2017); B;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1836-62-0, name is 2-(2-Methoxyphenoxy)ethylamine, A new synthetic method of this compound is introduced below., SDS of cas: 1836-62-0

Example -4: Preparation of carvedilol In a dry reaction flask charged 25.0 g 4 – (2,3-epoxy propoxy) carbazole (0.104 moles), 39.35 g of 2 – (2- methoxy phenoxy) ethylamine (0.235moles) in 250 ml dimethyl sulfoxide. The temperature of the reaction mass was raised to about 70C under stirring and maintaining the reaction mixture at 68 – 72C for 18 – 20 hrs. The reaction mass was cooled to about 30C and quenched the reaction mass in 250 ml water, stirred and extracted the resultant solution in 250 ml dichloromethane. The organic layer was separated and washed with aqueous sulphuric acid till pH of the washings about 7.0 – 8.0. The organic layer was separated and further adjusted the pH with the aqueous sulfuric acid to 4.0 – 4.5 to precipitate carvedilol sulphate salt. The precipitated salt was filtered and taken in 300 ml ethyl acetate and made alkaline with 10% sodium carbonate solution. The reaction mass was stirred and separated the organic layer. The ethyl acetate was distilled under vacuum, and 330 ml toluene was added to it. The solid obtained was filtered and crystallized from ethyl acetate to obtain pure carvedilol. Yield = 58 – 62%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; IPCA Laboratories Limited; EP1741700; (2007); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 74654-07-2, A common heterocyclic compound, 74654-07-2, name is 2-(2-(2-Methoxyethoxy)ethoxy)ethanamine, molecular formula is C7H17NO3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A solution of compound (ZDR019) (3.0 g, 7.88 mmol), dimethylamine hydrochloride (1.92 g, 23.6 mmol), sodium triacetoxyborohydride (3.32 g, 15.7 mmol) and N,N- diisopropylethylamine (4.8 ml_, 27.5 mmol) in 1,2-dichloroethane (150 mL) was stirred at room temperature for 18 h. The reaction was quenched through the addition of water (100 mL) and the pH adjusted to pH 6-7 using aqueous phosphate buffer solution (0.5 M, pH 7) . The mixture was then diluted with dichloromethane (100 mL) and the separated aqueous layer further extracted with dichloromethane (2 x 50 mL). The combined organic layers were washed with aqueous phosphate buffer solution (0.5 M, pH 7) (100 mL), dried over anhydrous magnesium sulfate, filtered and the filtrate concentrated in vacuo. Purification by flash chromatography (dichloromethane/methanol, 20: 1 10: 1 7: 1) afforded compound (ZDR022) as a white solid (2.40 g, 5.86 mmol, 74%).

The synthetic route of 74654-07-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; OTAGO INNOVATION LIMITED; BRIMBLE, Margaret Anne; COOK, Greg Murray; FERGUSON, Scott Andrew; HEIKAL, Adam; RENNISON, David; (130 pag.)WO2019/125185; (2019); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem