Tag: M.W=100-200

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 366-99-4, name is 3-Fluoro-4-methoxyaniline, This compound has unique chemical properties. The synthetic route is as follows., Computed Properties of C7H8FNO

Step C: 2,5-Difluoro-lambda/-{3-[(2-{[3-fluoro-4-(methyloxy)phenyl]amino}-4- pyrimidinyl)acetyl]phenyl}benzamide; To a solution containing 2.4 g (6.2 mmol) of lambda/-{3-[(2-chloro-4- pyrimidinyl)acetyl]phenyl}-2,5-difluorobenzamide and 60 mL of i-PrOH was added 0.92 g (6.5 mmol) of 3-fluoro-4-(methyloxy)phenyl amine and 0.1 mL of cone HCI. The reaction mixture was heated at 80 0C for 20 min, then diluted with an additional 60 mL of i-PrOH and heated at 90 0C for 13 h. The reaction mixture was allowed to cool to rt, then filtered. The filter cake was collected, slurried in DCM, and neutralized by the addition of aqueous NaHCO3. The organic layer was separated and the aqueous layer was further extracted with DCM. The combined organic layers were dried over MgSO4, filtered, and concentrated under recduced pressure. The residue was subjected to silica gel chromatography to give 1.76 g (59percent) of the title compound of Step C as a yellow solid: 1H-NMR (d6-DMSO, 400 MHz) delta 10.64 (s, 1 H), 9.83 (s, 1 H), 8.31 (d, 1 H1 J = 5.3 Hz), 8.25 (s, 1 H), 7.77 (d, 1 H1 J = 8.4 Hz), 7.65-7.69 (m, 1 H), 7.61 (d, 1 H1 J = 7.7 Hz), 7.53-7.59 (m, 1 H)1 7.42-7.47 (m, 4 H), 7.27 (d, 1 H, J = 9.2 Hz)1 7.13 (dd, 1 H1 J = 9.5 Hz and 9.5 Hz), 6.64 (d, 1 H, J = 5.3 Hz), 6.20 (s, 1), and 3.80 (s, 3 H), ; ESIMS: 561.07 (M+H+).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 366-99-4.

Reference:
Patent; SMITHKLINE BEECHAM CORPORATION; WO2009/76140; (2009); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 41789-95-1, name is 1-(3-Methoxyphenyl)-N-methylmethanamine, A new synthetic method of this compound is introduced below., SDS of cas: 41789-95-1

General procedure: A mixture of Pd(OAc)2 (6.7 mg, 0.030 mmol, 10 mmol%), Cu(OAc)2 (54.45 mg, 0.30 mmol, 1 equiv.), 1a (32.1 mg, 0.30 mmol, 1equiv.), CsF (136.7 mg, 0.90 mmol, 3 equiv.) was dissolved in a solvent of acetonitrile (3 mL) followed by addition of 2a (179 mg,0.60 mmol, 2 equiv.). The reaction mixture was stirred at 120 C for 24 h and progress of the reaction was monitored continuously byTLC with ethyl acetate: hexane eluent system. Upon completion of reaction the mixture was cooled to room temperature, poured into brine, and extracted with EtOAc. The combined extracts were dried over MgSO4 and filtered through pad of Celite eluting with ethylacetate. The filtrate was concentrated under reduced pressure and was purified by column chromatography (EtOAc/hexane) on silicagel to afford the 5,6-dihydrophenanthridine 3a. Compound 1i was synthesized in accordance with reported literature [25]. Characterization data of compounds 3a, 3c, and 3e were found exactly similar as reported in the literature (References of above compounds are mentioned in Supplementary data).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Asamdi, Manjoorahmed; Chauhan, Prakashsingh M.; Patel, Janki J.; Chikhalia, Kishor H.; Tetrahedron; vol. 75; 25; (2019); p. 3485 – 3494;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 450-91-9, These common heterocyclic compound, 450-91-9, name is 4-Fluoro-2-methoxyaniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a mixture of 4-fluoro-2-methoxyaniline (25.0 g, 177 mmol), K2C03 (36.7 g, 266 mmol) and Nal (10.6 g, 0.07 mmol) in /- PrOH (250 ml.) was added bis(2-chloroethyl)amine hydrochloride (47 g, 177 mmol). The reaction mixture was refluxed overnight. The solvent was removed and the residue was purified by column chromatography (petroleum ether/EtOAc = 10:1 ) to provide 1 -(4-fluoro-2-methoxyphenyl)piperazine. MS: m/z 212.36 [M+H] +.

The synthetic route of 450-91-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; KEZAR LIFE SCIENCES; JOHNSON, Henry; (166 pag.)WO2019/178510; (2019); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 710-18-9, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 710-18-9 as follows.

General procedure: Lewis acid (1.0-1.5eq) (powdered AlCl3, powdered FeCl3, 1 or 2 M solution of TiCl4 in CH2Cl2) was added portionwise to a stirred 1 M solution of the aromatic compound in dry CH2Cl2, and then 2a-f (1.2-1.5 eq) was added dropwise at 0C over a period of 2-10 min. The mixture was stirred for several hours at room temperature. Following complete conversion of starting material, as confirmed by GC analysis, the mixture was quenched with H2O and extracted with CH2Cl2 or EtOAc. The combined organic layers were successively washed with satd. aq. NaHCO3 and brine, dried over Na2SO4, and concentrated in vacuo. The residue was purified by distillation or column chromatography on silica-gel, if necessary.

According to the analysis of related databases, 710-18-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Warashina, Takuya; Matsuura, Daisuke; Kimura, Yoshikazu; Chemical and Pharmaceutical Bulletin; vol. 67; 6; (2019); p. 587 – 593;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 1758-46-9, A common heterocyclic compound, 1758-46-9, name is 2-Phenoxyethylamine, molecular formula is C8H11NO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 73: (6-BROMO-PYRIDIN-3-YLMETHYL)- (2-PHENOXV-ETHYL)-AMINE A solution of 2-bromo-pyridine-5-carbaldehyde (500MG, 2. 69MMOL) and 2- (PHENOXY)- ethylamine (594mg, 4.3mmol) in anhydrous ethanol (14ML) was stirred at room temperature for 7 hours. Sodium borohydride (102mg, 2. 7MMOL) was then added to the solution, and the resultant mixture was allowed to stir for a further 3 hours before being quenched with water. The resultant mixture was concentrated, to provide (6-BROMO- pyridin-3-ylmethyl)- (2-phenoxv-ethvl)-amine (quantitative), which was’used without further purification. LCMS (Method B): RT = 1. 79 minutes; 307 309 (M+H) +.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ARGENTA DISCOVERY LIMITED; WO2005/14588; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 1978-39-8,Some common heterocyclic compound, 1978-39-8, name is 5-Fluoro-2-methoxyaniline, molecular formula is C7H8FNO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of sodium nitrite (36 g, 0.51 mole) in water (50 mL) was slowly added to a solution of 5-fluoro-2-methoxy-phenylamine (61.5 g, 0.48 mol) in hydrochloric acid (20 % aqueous solution, 115 mL) at 0 C. After stirring for 10 minutes, a cooled (0 C) solution of acrolein (50 mL, 0.75 mol) in acetone (100 mL) containing calcium oxide (0.56 g, 0.010 mol) was added slowly to the reaction mixture. This was then followed by a solution of cuprous chloride (5 g, 0.05 mol) in acetone (100 mL) containing hydrochloric acid (20 % aqueous solution, 10 mL). The mixture was stirred at 0 to 30 C for 3 hours, and then extracted three times with dichloromethane (300 mL). The combined organic layers were washed with a saturated aqueous solution of sodium bicarbonate, a saturated aqueous solution of sodium chloride, dried over sodium sulfate, filtered, and evaporated to dryness to give a black viscous oil. The crude product was passed through a short silica column to give the crude product, which was used directly in the next step.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 5-Fluoro-2-methoxyaniline, its application will become more common.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; CLEVELAND, Thomas; MAKINGS, Lewis R.; HAMILTON, Matthew; GROOTENHUIS, Peter D.J.; WO2005/26137; (2005); A2;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

20265-97-8, name is 4-Methoxyaniline hydrochloride, belongs to ethers-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. category: ethers-buliding-blocks

General procedure: A cold solution of aryldiazonium salt (2.0 mmol) was preparedby adding a solution of NaNO2 (2.2 mmol, 0.15 g into 1.0 mL H2O) toa cold solution of arylamine hydrochloride (2.0 mmol of arylaminein 1.5 mL conc. HCl). The resulting solution of aryl diazonium saltwas added drop wise to a mixture of compound (II) (2.0 mmol,0.43 g) in water (15 mL) containing NaOH (25 mmol, 1.0 g) at0e5 C. The pH of the reaction mixture was maintained at 9e10 byadding 2.5% sodium hydroxide solution. Then, the reaction mixturewas stirred for 2 h at the same temperature and the precipitate wasfiltered off and the resulting solid was washed with cold ethanoland dried at 50 C in an oven. The crude product was purified usingthe recrystallization method as mentioned in Table 1. Under thesame reaction conditions, a series substituted arylazo quinolonedyes were obtained in satisfactory yields (Table 1, Scheme 2).

The synthetic route of 20265-97-8 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Rufchahi, E.O. Moradi; Gilani, A. Ghanadzadeh; Taghvaei; Karimi; Ramezanzade; Journal of Molecular Structure; vol. 1108; (2016); p. 623 – 630;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Electric Literature of 37466-89-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 37466-89-0, name is 3-Methoxybenzene-1,2-diamine belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

3-Methoxybenzene-1,2-diamine dihydrochloride (Example 54(a)) was partitioned between 10% aq. Na2CO3 and CH2Cl2. The aqueous layer was extracted with CH2Cl2 (2¡Á). The combined organic extracts were dried over Na2SO4, filtered and evaporated to yield 3-methoxybenzene-1,2-diamine. A mixture of the diamine (912 mg, 6.6 mmol) and diethyl oxalate (9.0 mL, 66 mmol, Aldrich) was heated at 185 C. for 18 h. The reaction mixture was left to reach room temperature and the solid precipitate was filtered. The filter cake was washed with EtOH and dried in vacuo to give the title compound. MS (ESI, pos. ion.) m/z: 191 (M+1).

The synthetic route of 3-Methoxybenzene-1,2-diamine has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Wang, Hui-Ling; Balan, Chenera; Doherty, Elizabeth M.; Falsey, James R.; Gore, Vijay Keshav; Katon, Jodie; Norman, Mark H.; US2005/176726; (2005); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4393-09-3, name is (2,3-Dimethoxyphenyl)methanamine, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of (2,3-Dimethoxyphenyl)methanamine

By proceeding in a similar manner to Example 2, but using the appropriately substituted amines in step 2, there were prepared Compounds E to BU depicted in Table 1. MOLECULAR FORMULA: C31H36N4O8. HPLC: RT = 7.6 minutes, area of main peak as a percentage of the total sample = 79% (gradient elution using a mixture of acetonitrile and water 3:7 to 17:3 v/v). MS: 593 [MH]+. MS: 591 [MH]-.

According to the analysis of related databases, 4393-09-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Aventis Pharma Limited; US6352977; (2002); B1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Application of 41365-75-7, A common heterocyclic compound, 41365-75-7, name is 1-Amino-3,3-diethoxypropane, molecular formula is C7H17NO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

5-bromo-4-chloro-2-(methylsulfanyl)pyrimidine (9.2 g, 38.4 mmol), K2003 (6.9 g, 49.9 mmol) and 3,3-diethoxypropan-1-amine (5.65 g, 38.4 mmol) were added to DMF (80 mL). The reaction was stirred for 3 h then quenched with H20 (100 mL), extracted with diethyl ether(2 x 75 mL) and dried over MgSO4. After filtration the filtrate was concentrated under reduced pressure to afford 5-bromo-N-(3,3-diethoxypropyl)-2-(methylsulfanyl)pyrimidin-4-amine 11 a (13.2 g, 98%) as a yellow gum. LC-MS (Method A) 351.9 [M+H] RT 3.32 mm.

The synthetic route of 41365-75-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; REDX PHARMA PLC; COOPER, Ian; LYONS, Amanda; (102 pag.)WO2017/137743; (2017); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem