Tag: M.W=100-200

Adding a certain compound to certain chemical reactions, such as: 80936-82-9, name is 4-(Methoxymethyl)aniline, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 80936-82-9, Recommanded Product: 4-(Methoxymethyl)aniline

Example 2 4-amino-7-(tert-butyl)-N-(4-(methoxymethyl)phenyl)-7H-pyrrolo[2,3-d]pyrimidine-5-carboxamide 2.43 g of HATU was added to a solution of 1.00 g of 4-amino-7-(tert-butyl)-7H-pyrrolo[2,3-d]pyrimidine-5-carboxylic acid obtained in step 5 of Reference Example 5, 878 mg of 4-(methoxymethyl)aniline, and 2.23 mL of N,N-diisopropylethylamine in 20 mL of DMF at room temperature. The mixture was stirred at room temperature overnight, and an aqueous sodium hydroxide solution was added thereto, followed by extraction with chloroform. The obtained organic layer was dried over anhydrous sodium sulfate, filtered, concentrated, and purified by silica gel chromatography. After concentration, the obtained precipitate was suspended and washed with methanol, followed by filtration and drying under reduced pressure, thereby obtaining 1.12 g of the title compound.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 4-(Methoxymethyl)aniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; TAIHO PHARMACEUTICAL CO., LTD.; MIYAZAKI, Isao; SHIMAMURA, Tadashi; KATO, Masanori; FUJITA, Hidenori; IGUCHI, Satoru; (161 pag.)US2018/9818; (2018); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 7664-66-6, name is 4-Isopropoxyaniline, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 7664-66-6, Recommanded Product: 7664-66-6

The 234 mg (1mmol) 4 – iodo anisole, 465 mg (5mmol) aniline, 38 mg (0.2mmol) CuI, 116.4 mg (0.4mmol) ligand L14, 20mg (0.5mmol) NaOH, 2mL1, 5 – pentanediol, adding 10 ml reaction tube, sealing, 80 C reaction under the condition of 50h. After the stop of the reaction, water, extracted with ethyl acetate, washing, saturated salt water washing, after drying with anhydrous sodium sulfate, filtered, the filtrate is distilled under reduced pressure, purification by silica gel chromatography separation column column, N – 2, 4 – dimethyl shall phenylaniline 244 mg, yield 95%.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Sun Yat-sen University; Wan Yiqian; Ding Xiaomei; Huang Manna; Zhu Xinhai; Yi Zhou; CN106883132; (2017); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16452-01-0, name is 3-Methoxy-4-methylaniline, A new synthetic method of this compound is introduced below., COA of Formula: C8H11NO

General procedure: Schiff bases 1-20 were synthesized from condensation ofcommercially available isatin with different aromatic aminesin a small amount of water in high yields [33, 34] (Scheme1). In a typical reaction, a mixture of isatin (1 mmol) anddifferent substituted aromatic amines (1 mmol) in smallamount of water were stirred at room temperature for 20-30h. The progress of reaction was monitored by TLC. The yellowcrystalline powder of Schiff bases was collected by filtration,washed with water and then dried to afford compounds1-20 in high yields. Recrystallization from ethanolafforded pure crystals. The structures of compounds 1-20were determined by employing different spectroscopic techniquesincluding 1H-NMR, EI MS, IR, and UV spectroscopyand purity was confirmed by CHN analysis.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Khan, Khalid Mohammed; Mughal, Uzma Rasool; Ambreen, Nida; Rama, Nasim Hasan; Naz, Farzana; Perveen, Shahnaz; Choudhary, Muhammad Iqbal; Letters in drug design and discovery; vol. 7; 10; (2010); p. 716 – 720;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 31576-51-9,Some common heterocyclic compound, 31576-51-9, name is 2-(2-Methoxyethoxy)ethanamine, molecular formula is C5H13NO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of 2-(2-methoxyethoxy)ethan-1-amine (1.04 g, 8.72mmol, 1.10 eq) was added N,N-di-CBZ-1H-pyrazole-1-carbamidine (3.00 g, 7.93 mmol, 1.00eq) at 15 C. The mixture was stirred at 15C for 16 hrs. The reaction mixture wasconcentrated in vacuo. The residue was purified by silica gel column to give Compound 61(2.2 g) as colorless oil.?H NMR 400 MHz CDC13: oe 11.74 (s, 1H), 8.65 (s, 1H), 7.42-7.28 (m, 1OH), 5.20 (s, 2H), 5.14 (s, 2H), 3.68-3.64 (m, 6H), 3.59-3.58 (m, 2H), 3.41 (s, 3H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-(2-Methoxyethoxy)ethanamine, its application will become more common.

Reference:
Patent; AFFERENT PHARMACEUTICALS INC.; HAWLEY, Ronald Charles; IBRAHIM, Prabha; FORD, Anthony, P.; GEVER, Joel, R.; (171 pag.)WO2017/160569; (2017); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 349-55-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 349-55-3, name is 3-Methoxy-5-(trifluoromethyl)aniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

1) 3-Methoxy-5-(trifluoromethyl)aniline (5 g) was suspended in 20% HCl (200 mL), stirred for 30 min, cooled to 0-5 C. and diazotized with NaNO2 (2.17 g) added in small portions. The mixture was stirred for 30 min at that temperature and added dropwise to boiling water (200 mL). The mixture was refluxed for 15 min, allowed to cool to room temperature and extracted with AcOEt, dried (MgSO4), filtered and evaporated. The residue was then purified by column chromatography (silica gel; eluent: hexane and AcOEt) to give 3-methoxy-5-(trifluoromethyl)phenol (3.6 g)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 3-Methoxy-5-(trifluoromethyl)aniline, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Tanabe Seiyaku Co., Ltd.; US6521666; (2003); B1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2688-84-8, name is 2-Phenoxyaniline belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C12H11NO

A suspension of 3-{4-(1-dodecyloxy)phenyl}propionic acid (0.60 g, 1.79 mmol) and thionyl chloride (0.64 g, 5.38 mmol) in benzene (7 ml) was refluxed under heating for 0.5 hours. To a residue obtained by evaporating the solvent under reduced pressure was added dichloromethane (14 ml) and, after adding thereto successively 2-phenoxyaniline (0.30 g, 1.63mmol) and triethylamine (0.54 g, 5.38 mmol) , the mixture was stirred at room temperature for 5 hours. The solvent was evaporated from the reaction solution, and the resultant residue was dissolved in ethyl acetate, washed with successive, water and a saturated sodium chloride aqueous solution, and dried over anhydrous magnesium sulfate, followed by evaporating the solvent under reduced pressure. Thus, there was obtained a crude crystal (0.65 g, 79%) of 3-[4-(1-dodecyloxy)phenyl]-N-(2-phenoxyphenyl)propionamide. A solution of 0.30 g (0.60 mmol) of the thus-obtained crude crystal in N,N-dimethylformamide (4 ml) was added to 60% sodium hydride (0.036 g, 0.70 mmol) having been washed1 with n-hexane and, after stirring at room temperature for 20 minutes, methyl bromoacetate (0.14 g, 0.90 mmol) was added thereto, followedby stirring at room temperature for 48 hours. The reaction solution was diluted with ethyl acetate, washed with successive, water and a saturated sodium chloride aqueous solution, and dried over anhydrous magnesium sulfate, followed by evaporating the solvent under reduced pressure. Purification of the thus-obtained residue through silica gel column chromatography (eluent: n-hexane/ethyl acetate = 5:1) yielded N-[3-{4-(1-dodecyloxy)phenyl}propionyl]-N-(2-phenoxyphenyl)glycine methyl ester (0.23 g) as a colorless oil.1H-NMR (300MHz, delta ppm in CDCl3) 0.88 (3H, t, J=7Hz), 1.20-1.45 (20H, m), 1.74 (2H, m), 2.43 (2H, m), 2.83 (2H,m), 3.69 (1H, d, J=17Hz), 3.73 (3H, s) , 3.89 (2H, t, J=7Hz), 4.87 (1H, d, J=17Hz), 6.72-7.50 (13H, m)

The synthetic route of 2688-84-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TAISHO PHARMACEUTICAL CO., LTD; EP1466891; (2004); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Adding a certain compound to certain chemical reactions, such as: 41789-95-1, name is 1-(3-Methoxyphenyl)-N-methylmethanamine, belongs to ethers-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 41789-95-1, name: 1-(3-Methoxyphenyl)-N-methylmethanamine

Step B: A solution of 4-chlorocinnamic acid (2.0 g, 10.9 mmol) and N-methylmorpholine (1.7 mL, 15.3 mmol) in anhydrous methylene chloride (80 mL) was cooled to -20 C. and isobutyl chloroformate (1.5 mL, 11.6 mmol) was added dropwise. After 15 minutes, a solution of the amine from Step A above (1.66 g, 10.9 mmol) in anhydrous methylene chloride (20 mL) was added dropwise, then the reaction was allowed to warm to room temperature and stir under N2 for 3 hours. The mixture was washed with 1M sodium dihydrogen phosphate dihydrate (2×), H2O (2×), and brine, dried over sodium sulfate, filtered, and concentrated in vacuo. Purification via flash column chromatography (1:1 ethyl acetate/hexanes) yielded the desired amide (2.82 g, 82%) as a white solid: 1H NMR (300 MHz, CDCl3) delta 7.70 (dd, J=15.3, 4.8 Hz, 1H), 7.48 (d, J=8.4 Hz, 1H), 7.39 (d, J=8.4 Hz, 1H), 7.35 (d, J=8.4 Hz, 1H), 7.30 (d, J=8.4 Hz, 1H), 7.40-7.26 (m, 1H), 6.91 (d, J=15.3 Hz, 1H), 6.83 (s, 1H), 6.83 (d, J=12.3 Hz, 1H), 6.77 (d, J=15.3 Hz, 1H), 4.67 (d, J=12.3 Hz, 2H), 3.80 (s, 3H), 3.08 (d, J=4.2 Hz, 3H); ESI MS m/z 316 [M+H]+.; Step B: A solution of 4-chlorocinnamic acid (2.0 g, 10.9 mmol) and N-methylmorpholine (1.7 mL, 15.3 mmol) in anhydrous methylene chloride (80 mL) was cooled to -20 C. Isobutyl chloroformate (1.5 mL, 11.6 mmol) was added dropwise. After 15 minutes, a solution of the product from Step A (1.66 g, 10.9 mmol) in anhydrous methylene chloride (20 mL) was added dropwise. The reaction was allowed to warm to room temperature and stir under N2 for 3 hours. The reaction mixture was then washed with 1 M NaH2PO4.2H2O (2×), H2O (2×), and brine, then dried over sodium sulfate, filtered, and concentrated in vacuo. Purification via flash column chromatography (1:1 ethyl acetate/hexanes) yielded the desired amide (2.82 g, 82%) as a white solid: 1H NMR (300 MHz, CDCl3) delta 7.70 (dd, J=15.3, 4.8 Hz, 1H), 7.48 (d, J=8.4 Hz, 1H), 7.39 (d, J=8.4 Hz, 1H), 7.35 (d, J=8.4 Hz, 1H), 7.30 (d, J=8.4 Hz, 1H), 7.29 (m, 1H), 6.91 (d, J=15.3 Hz, 1H), 6.83 (s, 1H), 6.80 (m, 1H), 6.77 (d, J=15.3 Hz, 1H), 4.69-4.65 (m, 2H), 3.80 (s, 3H), 3.09-3.07 (m, 3H); ESI MS m/z=316 [C18H18ClNO2+H]+.; Step B: A solution of 4-chlorocinnamic acid (2.0 g, 10.9 mmol) and N-methylmorpholine (1.7 mL, 15.3 mmol) in anhydrous methylene chloride (80 mL) was cooled to -20 C. and isobutyl chloroformate (1.5 mL, 11.6 mmol) was added dropwise. After 15 minutes, a solution of the amine from Step A above (1.66 g, 10.9 mmol) in anhydrous methylene chloride (20 mL) was added dropwise, then the reaction was allowed to warm to room temperature and stir under N2 for 3 hours. The mixture was washed with 1M sodium dihydrogen phosphate dihydrate (2×), H2O (2×), and brine, dried over sodium sulfate, filtered, and concentrated in vacuo. Purification via flash column chromatography (1:1 ethyl acetate/hexanes) yielded the desired amide (2.82 g, 82%) as a white solid: 1H NMR (300 MHz, CDCl3) delta 7.70 (dd, J=15.3, 4.8 Hz, 1H), 7.48 (d, J=8.4 Hz, 1H), 7.39 (d, J=8.4 Hz, 1H), 7.35 (d, J=8.4 Hz, 1H), 7.30 (d, J=8.4 Hz, 1H), 7.40-7.26 (m, 1H), 6.91 (d, J=15.3 Hz, 1H), 6.83 (s, 1H), 6.83 (d, J=12.3 Hz, 1H), 6.77 (d, J=15.3 Hz, 1H), 4.67 (d, J=12.3 Hz, 2H), 3.80 (s, 3H), 3.08 (d, J=4.2 Hz, 3H); ESI MS m/z 316 [M+H]+.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; AMR Technology, Inc.; US2007/21408; (2007); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Reference of 1758-46-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1758-46-9, name is 2-Phenoxyethylamine belongs to ethers-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a solution of 2-phenoxy-ethylamine (5 eq.) or 2-(2-methoxyphenoxy-)ethylamine (5 eq.) in 2-methoxyethanol(25 mL per mmol of amine) the appropriate aliphatic chloride33-39 (1 eq.) and KI (cat.) was added. The mixturewas refluxed for18-48 h and concentrated. The residue was suspended in CHCl3and washed with 1M NaOH, brine, dried over anhydrous Na2SO4and concentrated. The crude was purified by flash chromatographyto give the titled compound.

The synthetic route of 2-Phenoxyethylamine has been constantly updated, and we look forward to future research findings.

Reference:
Article; Franchini, Silvia; Sorbi, Claudia; Linciano, Pasquale; Carnevale, Gianluca; Tait, Annalisa; Ronsisvalle, Simone; Buccioni, Michela; Del Bello, Fabio; Cilia, Antonio; Pirona, Lorenza; Denora, Nunzio; Iacobazzi, Rosa Maria; Brasili, Livio; European Journal of Medicinal Chemistry; vol. 176; (2019); p. 310 – 325;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Related Products of 366-99-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 366-99-4 as follows.

Step A: Preparation of 2-amino-N-(3-fluoro-4-methoxyphenyl)benzamide: To a stirred suspension of isatoic anhydride (1.63 g, 10 mmol) in 15 mL dioxane at room temperature under nitrogen was added powdered sodium hydroxide followed by 3-fluoro-4-methoxyaniline (1.41 g, 10 mmol). The mixture was immersed in a room temperature oil bath and slowly heated to reflux. Carbon dioxide gas evolution was evident. After stirring at reflux for 2 hours, the reaction mixture was cooled to room temperature and inorganics were filtered off with dioxane. The filtrate was concentrated to dryness to a brown solid. The crude product was dissolved in a minimum of hot 95% EtOH and crystals formed upon cooling. The crystals were filtered off and rinsed with a minimum of ice cold 95% EtOH to give a tan solid (1.0 g, 39%). 1H-NMR (400 MHz, CDCl3) delta 7.66 (br s, 1H), 7.50 (dd, 1H), 7.44 (dd, 1H), 7.26 (m, 1H), 7.17 (m, 1H), 6.95 (m, 1H), 6.71 (m, 2H), 5.50 (br s, 2H), 3.89 (s, 3H).

According to the analysis of related databases, 366-99-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Blake, James F.; Boyd, Steven Armen; De Meese, Jason; Fong, Kin Chiu; Gaudino, John J.; Kaplan, Tomas; Marlow, Allison L.; Seo, Jeongbeob; Thomas, Allen A.; Tian, Hongqi; Cohen, Frederick; Young, Wendy B.; US2007/238726; (2007); A1;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem

Synthetic Route of 91-16-7,Some common heterocyclic compound, 91-16-7, name is 1,2-Dimethoxybenzene, molecular formula is C8H10O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

That is,A 30 mL Schlenk tube was charged with 1,2-dimethoxybenzene (76 muL, 0.6 mmol)GO containing 50.66 w% of oxygen (100 mg)And boron trifluoride-ethyl ether complex (2.0 mL, 16.2 mmol) were charged,And reacted at 60 C. for 8 hours.Here, in GO,The amount of potassium permanganate to be used at the time of synthesis of GO is set to 5 times the amount of potassium permanganate used in Example 7 is used.After the reaction, the GO was crushed with ultrasonic waves, and the filtrate was suction filtered while washing with chloroform, the filtrate was separated with chloroform and water, the organic layer was filtered with folded folded paper and the solvent was distilled off under reduced pressure with an evaporator And dried under reduced pressure. The yield was 83%.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1,2-Dimethoxybenzene, its application will become more common.

Reference:
Patent; OKAYAMA UNIVERSITY; NISHINA, YUTA; MORIOKU, KUMIKA; (13 pag.)JP2017/31106; (2017); A;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem