Alper, Koray et al. published their research in Energy & Fuels in 2019 | CAS: 2380-78-1

4-Hydroxy-3-methoxyphenethanol (cas: 2380-78-1) belongs to ethers. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Polyesters are important plastics, with monomers linked by ester moieties. Esters contain a carbonyl center, which gives rise to 120° C–C–O and O–C–O angles. Unlike amides, esters are structurally flexible functional groups because rotation about the C–O–C bonds has a low barrier. Their flexibility and low polarity is manifested in their physical properties; they tend to be less rigid (lower melting point) and more volatile (lower boiling point) than the corresponding amides. Related Products of 2380-78-1

Hydrothermal Liquefaction of Lignocellulosic Biomass Using Potassium Fluoride-Doped Alumina was written by Alper, Koray;Tekin, Kubilay;Karagoz, Selhan. And the article was included in Energy & Fuels in 2019.Related Products of 2380-78-1 The following contents are mentioned in the article:

Hydrothermal liquefaction (HTL) of spruce wood was performed without and with the use of a potassium fluoride-doped alumina catalyst (KF/Al2O3) in a bench-top reactor. HTL runs were performed at 250, 300, and 350°C with residence times of 15, 30, and 60 min. The effects of the catalyst at different catalyst loadings (in concentrations from 10 to 40 wt % of the lignocellulosic biomass) on the bio-oil and solid residue yields as well as their properties were investigated. The use of the catalyst increased the bio-oil yields over twofold and reduced char yields. Gas chromatog.-mass spectrometry anal. revealed that the bio-oil from the noncatalytic and catalytic runs consisted of aldehydes, ketones, phenols, acids, and esters. Among these components, phenolic compounds were dominant in both the noncatalytic and catalytic runs. The relative yields of phenolic compounds increased with catalyst use. The highest heating value was estimated to be approx. 29 MJ/kg. The b.p. distributions of the bio-oils from both runs revealed that the total naphtha fraction (light and heavy) was comparable to that of crude oil. This study involved multiple reactions and reactants, such as 4-Hydroxy-3-methoxyphenethanol (cas: 2380-78-1Related Products of 2380-78-1).

4-Hydroxy-3-methoxyphenethanol (cas: 2380-78-1) belongs to ethers. Esters perform as high-grade solvents for a broad array of plastics, plasticizers, resins, and lacquers, and are one of the largest classes of synthetic lubricants on the commercial market. Polyesters are important plastics, with monomers linked by ester moieties. Esters contain a carbonyl center, which gives rise to 120° C–C–O and O–C–O angles. Unlike amides, esters are structurally flexible functional groups because rotation about the C–O–C bonds has a low barrier. Their flexibility and low polarity is manifested in their physical properties; they tend to be less rigid (lower melting point) and more volatile (lower boiling point) than the corresponding amides. Related Products of 2380-78-1

Referemce:
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem