Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. In an article, author is Szeluga, Urszula, once mentioned the application of 1836-62-0, Name is 2-(2-Methoxyphenoxy)ethylamine, molecular formula is C9H13NO2, molecular weight is 167.205, MDL number is MFCD00235185, category is ethers-buliding-blocks. Now introduce a scientific discovery about this category, Application In Synthesis of 2-(2-Methoxyphenoxy)ethylamine.
Effect of grain fractions of crushed carbon foam on morphology and thermomechanical and tribological properties of random epoxy-carbon composites
The effect of dimension of carbon foam (CF) grains used as a filler of epoxy matrix on the morphology and thermomechanical and tribological properties of final composites was described. The carbon foam proposed as particle reinforcement of composites was prepared from epoxy resin of diglycidyl ether of bisphenol A type cured with phenol-formaldehyde resin (novolac) in a self-foaming process followed by carbonization. Structures of the carbon foam filler and resultant composites were studied by microscopic and spectroscopic methods. Three different carbon foam grain fractions, below 200 um, 200-315 um and below 315 um, keeping CF porous structure and specific properties, were used to obtain new composite materials. There were observed good quality dispersion of CF grains in epoxy matrix and excellent adhesion at interfacial areas, regardless of carbon foam fraction. In the effect, these composites have enhanced thermomechanical and tribological properties and relatively low density compared to carbon-polymer composites produced so far. It was found that all CF fractions used reduced friction coefficient of resultant composites compared to pure epoxy matrix, however the influence of individual filler fraction on composite’s COF was different. The morphology of worn surfaces of epoxy composites after friction tests showed that the effect depends on grain fraction of CF filler as well as on the load used.
Do you like my blog? If you like, you can also browse other articles about this kind. Thanks for taking the time to read the blog about 1836-62-0, Application In Synthesis of 2-(2-Methoxyphenoxy)ethylamine.