The important role of 41789-95-1

The chemical industry reduces the impact on the environment during synthesis 1-(3-Methoxyphenyl)-N-methylmethanamine. I believe this compound will play a more active role in future production and life.

Related Products of 41789-95-1, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 41789-95-1, name is 1-(3-Methoxyphenyl)-N-methylmethanamine, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: In a typical reaction, the Wang resin (3, 2.0 g, 1.2 mmol/g, 100-200 mesh and 1% DVB) was swollen in CH2Cl2 (20 mL). 5-Bromopentanoic acid (4, 2.15 g, 12.0 mmol) and DIC (1.51 g, 12.0 mmol) were dissolved in the minimum volume of CH2Cl2/DMF (1:1) required for complete dissolution. The activated scaffold solution was added to the resin, followed by the addition of slurry of DMAP (4 mg, 10 mol %) in CH2Cl2 (0.5 mL). The reaction vessel was shaken at room temperature for 48 h. The resin was washed with CH2Cl2 (2 × 25 mL), DMF (2 × 25 mL), MeOH (2 × 25 mL) again followed by DMF (2 × 25 mL), CH2Cl2 (3 × 25 mL), and then further dried in vacuo overnight to afford the resin-bound 5-bromopentanoic acid in good yield (2.73 g, 81%). Next, to the resin-bound 5-bromopentanoic acid (2.70 g, 3.9 mmol), swelled in DMF (10 mL), K2CO3 (2.13 g, 15.6 mmol) was added at ambient temperature, and the reaction suspension was stirred for another 30 min. Later, methyl 2-azido-4-hydroxy-5-methoxybenzoate (5, 1.73 g, 7.8 mmol) was added to the resin. The reaction suspension was stirred at 50 C for 48 h. The solid-support was washed with water (3 × 20 mL), CH2Cl2 (2 × 20 mL), MeOH (3 × 15 mL), and then dried in vacuo to afford the resin-bound precursor 6a (3.07 g, 75%). To a suspension of this resin-bound ester in 1,4-dioxane (10 mL) was added 1 N NaOH solution (2.5 mL) and the reaction mixture was heated at 80 C for 12 h. On cooling, the resin was filtered and rinsed with water (2 × 15 mL), water/dioxane (1:9, 2 × 15 mL), MeOH (2 × 15 mL), CH2Cl2 (2 × 15 mL), Et2O (2 × 15 mL) and dried in vacuo to afford the resin-bound acid. Next, to the resin-bound 2-azido-4-(5-ethoxy-5-oxopentyloxy)-benzoic acid (2.81 g, 2.6 mmol) swelled in CH2Cl2 (10 mL), EDCI (0.99 g, 5.2 mmol), HOBt (0.71 g, 5.2 mmol) and l-proline methyl ester (7a, 0.84 g, 6.5 mmol) were added. This reaction mixture was stirred for 12 h at room temperature, then resin was filtered and washed with H2O (3 × 10 mL), CH2Cl2 (2 × 10 mL), MeOH (3 × 10 mL) and Et2O (3 × 10 mL) to afford the resin bound methyl 5-(5-azido-4-(2-formylpyrrolidine-1-carbonyl)-2-methoxyphenoxy) pentanoate 8a in good yield (2.89 g, 71%). To a suspension of this resin (0.110 g, 1.2 mmol) in CH2Cl2 (5 mL), AlCl3 (0.79 g, 6 mmol), NaI (0.22 g, 2 mmol) and 2-(4-methoxyphenyl)ethanamine (9a, 0.35 mL, 2.4 mmol) were added at room temperature and stirred for 6 h. Aqueous 1 M potassium carbonate solution (2 mL) was added to the reaction mixture followed by excess of NaI, quenched with saturated sodium thiosulfate (Na2S2O3), and then resin was separated by simple filtration and washed with CH2Cl2 (10 mL). The removal of excess amine impurities from the final resin cleaved crude product was achieved by solid-supported liquid-liquid extraction (SLE) with a fritted vessel previously packed with ?Varian?s Hydromatrix?. The crude compound 1a which contains excess of amine was passed through the Hydromatrix support into a collection plate below, while the amine salts were retained by the solid matrix, resulting in the effective removal of the amine impurities. This filtrate and washings were evaporated to dryness under reduced pressure. Finally, it was further purified by the preparative thin layer chromatography by using ethyl acetate:methanol (98:2) as eluent to afford the corresponding compound 1a in high purity (brown solid, 0.013 g, 56%).

The chemical industry reduces the impact on the environment during synthesis 1-(3-Methoxyphenyl)-N-methylmethanamine. I believe this compound will play a more active role in future production and life.

Reference:
Article; Kamal, Ahmed; Prabhakar; Shankaraiah, Nagula; Markandeya, Nagula; Venkat Reddy; Srinivasulu, Vunnam; Sathish, Manda; Tetrahedron Letters; vol. 54; 33; (2013); p. 4435 – 4441;,
Ether – Wikipedia,
Ether | (C2H5)2O – PubChem